VULCAN HART Bushing & Ignitor (00-853991-00001) Buyer's Guide — Worldwide OEM Replacement Sourcing
Table of Contentsexpand_more
The VULCAN HART Bushing, Ignitor (Mfr Part # 00-853991-00001) is a genuine OEM replacement ignition component for Vulcan Hart commercial ovens, combining a spark ignitor with its mounting bushing so the burner lights reliably and the flame is sensed correctly. It is ordered by part number, not by generic size, because fitment is model-specific.
What is a VULCAN HART bushing and ignitor?
A VULCAN HART bushing and ignitor is an OEM ignition sub-assembly in which a ceramic-bodied spark ignitor is seated in a bushing that mounts through the oven's burner or pilot bracket. The ignitor generates the spark that lights the gas burner; the bushing insulates and positions it at the correct gap.
Vulcan Hart is a long-established commercial cooking equipment brand, and its ovens are widely deployed in restaurants, institutional kitchens, and foodservice chains worldwide. Because these ovens run on gas and cycle frequently, ignition components are among the most commonly replaced parts.
How does the ignitor and bushing work in a Vulcan Hart oven?
When the oven calls for heat, the control energizes the ignition circuit. The ignitor produces a high-voltage spark across a fixed gap, igniting gas at the burner or pilot. The bushing holds the ignitor at the correct distance and insulates it from the metal bracket.
If the bushing cracks, carbon-tracks, or the ignitor gap drifts, ignition becomes intermittent — the classic symptom being a burner that clicks without lighting, or lights and then drops out. Replacing the bushing and ignitor together restores the original gap and insulation in one step.
Spec table: VULCAN HART Bushing, Ignitor (00-853991-00001)
| Attribute | Value |
|---|---|
| Manufacturer | Vulcan Hart |
| Manufacturer Part Number | 00-853991-00001 |
| Product Type | Bushing, Ignitor (ignition sub-assembly) |
| Category | Commercial oven replacement parts |
| OEM Status | Genuine OEM replacement part |
| Application | Vulcan Hart commercial gas ovens |
| Function | Spark ignition and ignitor mounting/insulation |
| Supply Voltage | Per oven ignition circuit (verify against oven nameplate) |
| Frequency Compatibility | 50 Hz and 60 Hz oven variants supported by matching control |
| Mounting | Direct-fit to OEM burner/pilot bracket |
| Currency (indicative) | Quoted in USD |
Only the manufacturer part number and application above are fixed by the OEM listing. Electrical values depend on the specific oven model, so always confirm against the oven nameplate and wiring diagram before ordering.
Which ignition-related parts should you replace together?
Ignition faults rarely travel alone. When you replace the bushing and ignitor, inspect the pilot assembly, burner valve, and circuit protection at the same time. A weak pilot or a sticking burner valve will mimic an ignitor failure and cause repeat call-outs.
For a complete ignition refresh on a Vulcan Hart oven, the common companion parts are the pilot assembly, the burner valve, and the fuse protecting the ignition circuit. Sourcing them together reduces downtime and shipping cost, which matters for export buyers paying freight on multiple small orders.
Types and applications in Worldwide foodservice
Vulcan Hart ovens are used across restaurants, hotels, hospitals, schools, and central production kitchens. In Worldwide markets, the same oven platform may be supplied in 50 Hz or 60 Hz configurations depending on region, so ignition and control parts must match the local electrical variant.
Export and cross-border buyers should confirm the oven's voltage and frequency before ordering ignition components. A part that is correct for a 60 Hz North American oven may not suit a 50 Hz unit unless the matching control and transformer are also specified.
Selection criteria: how to choose the right ignition part
- Match the manufacturer part number. Order by 00-853991-00001 or the exact OEM number on your oven's parts list — never by appearance alone.
- Confirm the oven model and serial number. Vulcan Hart uses multiple ignition variants across ranges; the serial plate is the authoritative source.
- Check the electrical variant. Verify voltage and 50 Hz / 60 Hz compatibility against the oven nameplate.
- Inspect the mounting bracket and gap. A worn bracket or incorrect gap will shorten ignitor life even with a new part.
- Assess duty cycle. High-volume kitchens cycle burners far more often; plan preventive replacement intervals accordingly.
- Buy genuine OEM. Aftermarket ignitors may fit physically but drift in gap and insulation performance, causing repeat failures.
Product comparison ladder: Vulcan Hart oven replacement parts
| Part | Function | Typical Replacement Trigger | SKU |
|---|---|---|---|
| VULCAN HART Replacement Fuse for Ovens | Protects the ignition/control circuit from overcurrent | Blown fuse, no ignition power | 28ZX59 |
| VULCAN HART OEM Pilot Assembly | Provides ignition and flame sensing at the burner | Weak or unstable pilot flame | 28ZZ83 |
| VULCAN HART Replacement Burner Valve | Controls gas flow to the burner for ignition and flame regulation | Burner will not light or will not hold flame | 28ZY54 |
| VULCAN HART Replacement Knob | Adjusts temperature or function settings | Cracked or stripped control knob | 28ZX26 |
| VULCAN HART OEM Replacement Knob | Adjusts oven settings such as temperature or gas flow | Worn knob, poor grip or calibration feel | 55CP29 |
| VULCAN HART Replacement Knob | Adjusts temperature or function settings | Direct-fit OEM knob replacement | 28ZX66 |
| VULCAN HART Door Latch | Secures the door to maintain heat retention and safe cooking | Door will not seal or latch securely | 32ZK31 |
| Vulcan Hart Water Filter | Treats incoming water to protect internal components | Sediment build-up, inconsistent performance | 879DW2 |
Step up the ladder when a single-part fix has already failed once: if a new ignitor still will not hold flame, the pilot assembly or burner valve is the next suspect. For high-volume kitchens, replacing the ignition group as a set is usually cheaper than a second service call.
Why source VULCAN HART parts from 3G Electric
3G Electric supplies genuine industrial equipment, parts, and supplies across 14 industrial departments — machining, electrical, power transmission, material handling, plumbing, HVAC and refrigeration, pneumatics, hydraulics, pumps, instrumentation, test and measurement, welding, lighting, and combustion and burner systems. We stock 164+ related products and bring 35+ years of experience interpreting customer demand and delivering the right part.
Our specialist depth in combustion, pumps, and controls means we can help you confirm fitment, cross-reference OEM numbers, and assemble a complete repair kit rather than a single line item. We supply worldwide with export documentation experience and incoterms-neutral terms, and we quote in USD.
Frequently asked questions
What is the VULCAN HART Bushing, Ignitor (00-853991-00001) used for?
It is a genuine OEM ignition sub-assembly for Vulcan Hart commercial gas ovens. The ignitor produces the spark that lights the burner, while the bushing mounts and insulates it at the correct gap. It is replaced when ignition becomes intermittent or the bushing cracks.
How do I confirm this part fits my oven?
Match the manufacturer part number 00-853991-00001 against your oven's parts list, then confirm the model and serial number on the rating plate. Vulcan Hart uses several ignition variants, so the serial plate — not a photo — is the authoritative fitment source.
Can I buy VULCAN HART 00-853991-00001 in Worldwide markets?
Yes. 3G Electric supplies worldwide with export documentation experience and incoterms-neutral terms. Lead time depends on stock position and destination; contact us for a current quote in USD and an estimated delivery window.
Does 50 Hz vs 60 Hz matter for ignition parts?
It can. The ignitor itself is largely frequency-agnostic, but the oven's ignition control and transformer are not. Confirm the oven's voltage and frequency variant before ordering so the replacement matches the installed control.
Should I replace the ignitor and pilot assembly together?
Often yes. If the pilot flame is weak or unstable, a new ignitor alone will not fix the fault. Replacing the pilot assembly and burner valve alongside the ignitor reduces repeat service calls, especially in high-volume kitchens.
Is a genuine OEM ignitor better than an aftermarket one?
For commercial ovens, genuine OEM is the safer choice. Aftermarket ignitors may fit physically but can drift in spark gap and ceramic insulation performance, causing intermittent ignition and premature failure. OEM parts preserve the original specification.
Key takeaways
- The VULCAN HART Bushing, Ignitor (00-853991-00001) is a genuine OEM ignition sub-assembly for Vulcan Hart commercial gas ovens.
- Always order by manufacturer part number and confirm the oven model and serial number before purchase.
- Check the 50 Hz / 60 Hz and voltage variant for Worldwide installations.
- Replace the ignitor, pilot assembly, and burner valve as a set when ignition faults recur.
- 3G Electric stocks 164+ related products, quotes in USD, and ships worldwide with export documentation support.
Need a quote, fitment confirmation, or help building a complete Vulcan Hart ignition repair kit? Contact 3G Electric for pricing, sizing assistance, and technical support — we interpret your demand and deliver the right part, worldwide.
