We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
⌕
RFQ CartGet a QuoteSign inSign up

CLASSIC

CLASSIC is a brand specializing in hydronic baseboard heating systems and their associated trim and finishing components. The product line centers on assembled hydronic baseboard heaters constructed with copper tubing and aluminum fins, finished in white. These heaters are available in lengths ranging from 2 ft to 8 ft, allowing for modular installation in residential and light commercial spaces. The copper tubing serves as the primary heat-transfer conduit, while the aluminum fins maximize surface area for efficient convective heat distribution. Each unit includes either element slide cradles or support brackets, depending on the length, to ensure secure mounting and alignment. In addition to the heaters, CLASSIC offers a range of trim and finishing accessories, including end components such as right-hand hinged end caps (model CL-REC) and inside corner components with a 90-degree angle (model CL-IC). These accessories are made from extruded aluminum with a white finish, matching the heaters for a cohesive appearance. The corner components are designed to facilitate continuous baseboard runs around interior walls, while the end caps provide a finished look at termination points. The brand's focus on standardized dimensions and materials—copper for tubing, aluminum for fins and trim—supports compatibility with typical hydronic heating systems. 3G Electric supplies CLASSIC products globally, offering a catalog of 14 SKUs that cover the full range of heater lengths and finishing components. For plant engineers and maintenance managers, these products are specified for new installations or retrofits where consistent heat output and a clean, low-profile aesthetic are required. The use of copper tubing ensures corrosion resistance and thermal conductivity, while the aluminum fins are lightweight and durable. The white finish is a standard neutral color that blends with most interior environments. Procurement specialists can source individual heater lengths or complete sets with trim, enabling precise matching to room dimensions. The modular nature of the system—with separate end caps and corner pieces—allows for custom layouts without custom fabrication. CLASSIC does not claim proprietary technology or advanced ratings; instead, the products are designed to meet basic functional requirements for hydronic baseboard heating in controlled indoor environments. 3G Electric supports these products with datasheets and logistics coordination for international orders.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 1 of 1

About CLASSIC

CLASSIC is a brand specializing in hydronic baseboard heating systems and their associated trim and finishing components. The product line centers on assembled hydronic baseboard heaters constructed with copper tubing and aluminum fins, finished in white. These heaters are available in lengths ranging from 2 ft to 8 ft, allowing for modular installation in residential and light commercial spaces. The copper tubing serves as the primary heat-transfer conduit, while the aluminum fins maximize surface area for efficient convective heat distribution. Each unit includes either element slide cradles or support brackets, depending on the length, to ensure secure mounting and alignment. In addition to the heaters, CLASSIC offers a range of trim and finishing accessories, including end components such as right-hand hinged end caps (model CL-REC) and inside corner components with a 90-degree angle (model CL-IC). These accessories are made from extruded aluminum with a white finish, matching the heaters for a cohesive appearance. The corner components are designed to facilitate continuous baseboard runs around interior walls, while the end caps provide a finished look at termination points. The brand's focus on standardized dimensions and materials—copper for tubing, aluminum for fins and trim—supports compatibility with typical hydronic heating systems. 3G Electric supplies CLASSIC products globally, offering a catalog of 14 SKUs that cover the full range of heater lengths and finishing components. For plant engineers and maintenance managers, these products are specified for new installations or retrofits where consistent heat output and a clean, low-profile aesthetic are required. The use of copper tubing ensures corrosion resistance and thermal conductivity, while the aluminum fins are lightweight and durable. The white finish is a standard neutral color that blends with most interior environments. Procurement specialists can source individual heater lengths or complete sets with trim, enabling precise matching to room dimensions. The modular nature of the system—with separate end caps and corner pieces—allows for custom layouts without custom fabrication. CLASSIC does not claim proprietary technology or advanced ratings; instead, the products are designed to meet basic functional requirements for hydronic baseboard heating in controlled indoor environments. 3G Electric supports these products with datasheets and logistics coordination for international orders.

Common Applications

  • Residential hydronic heating — CLASSIC 3 ft to 8 ft baseboard heaters for room-by-room temperature control
  • Light commercial office spaces — CLASSIC 6 ft and 8 ft heaters with inside corner components for continuous wall runs
  • Retrofit installations — CLASSIC 2 ft and 3 ft heaters for tight spaces or replacement of older units
  • Multi-room apartment buildings — CLASSIC modular heaters with end caps for individual room zoning
  • School or clinic corridors — CLASSIC 7 ft and 8 ft heaters with support brackets for long, straight wall sections

Frequently asked questions

Common questions about CLASSIC from 3G Electric.

What materials are used in CLASSIC hydronic baseboard heaters?

CLASSIC hydronic baseboard heaters use copper tubing for the water-carrying element and aluminum fins for heat transfer. The copper tubing provides corrosion resistance and efficient thermal conduction, while the aluminum fins increase surface area to improve convective heat output. The outer housing and trim components, such as end caps and corner pieces, are made from extruded aluminum with a white painted finish. This material selection is standard for hydronic baseboard systems and ensures compatibility with typical hot-water heating loops.

What lengths are available for CLASSIC hydronic baseboard heaters?

CLASSIC offers assembled hydronic baseboard heaters in lengths of 2 ft, 3 ft, 5 ft, 6 ft, 7 ft, and 8 ft. These lengths allow for modular installation to fit various room dimensions. Each heater is supplied with either element slide cradles or support brackets, depending on the length, to facilitate mounting. The range of sizes enables precise coverage without requiring field cutting of the heater assembly, though trim components may need adjustment for non-standard runs.

What trim and finishing accessories does CLASSIC offer for baseboard heaters?

CLASSIC provides trim and finishing accessories including end components and corner components. The end components include a right-hand hinged end cap (model CL-REC) made from extruded aluminum with a white finish. Corner components include an inside corner 90-degree piece (model CL-IC) for turning baseboard runs around interior walls. These accessories are designed to match the heater units in color and material, providing a finished appearance at terminations and corners.

Are CLASSIC hydronic baseboard heaters suitable for commercial applications?

CLASSIC hydronic baseboard heaters are primarily designed for residential and light commercial applications where standard hot-water heating systems are used. The copper tubing and aluminum fin construction are suitable for typical operating temperatures and pressures found in hydronic loops. For heavy-duty industrial environments with high temperatures or corrosive conditions, alternative products with higher pressure ratings or specialized materials may be required. The heaters are not rated for outdoor or wet locations.

How does 3G Electric support the purchase of CLASSIC products?

3G Electric supplies CLASSIC hydronic baseboard heaters and trim accessories globally, with a catalog of 14 SKUs covering all available lengths and finishing components. We provide datasheets for each product, which include specifications such as dimensions, materials, and included hardware. Logistics support is available for international shipping, including coordination of freight and customs documentation. Procurement specialists can request quotes for single units or bulk orders through our online platform or direct inquiry.

Does 3G Electric supply CLASSIC products?

Yes — 3G Electric (S) Pte. Ltd. supplies CLASSIC products. We stock the CLASSIC catalog and supply genuine factory-original products with full manufacturer warranty and technical support.