Fantini Cosmi Pressure switch B01DM 4-15 bar

FAN04118 à 32 Safety pressure switches with manual reset Pressure switches with stainless steel membrane, suitable for vapour generators, for fluids and inert gases in general. CH17 G 1/4 70 15,5 40 23 42 8 Range Sensitive element Min. differential Connection Protection Availability max. pressure for reset G/14 degree bar bar B01AM 0,7 ÷ 3 6 0,4 flange IP40 in stock B01BM 2 ÷ 5,5 7 0,6 flange IP40 in stock B01CM 3÷7 9 0,6 flange IP40 in stock B01DM 4 ÷ 15 18 1 flange IP40 in stock B01AM4 0,7 ÷ 3 6 0,4 threaded IP40 on request B01BM4 2 ÷ 5,5 7 0,6 threaded IP40 on request B01CM4 3÷7 9 0,6 threaded IP40 on request B01DM4 4 ÷ 15 18 1 threaded IP40 on request 1 Bar = 100Kpa ELECTRICAL FEATURES Snap action SPDT microswitch with manual reset, contacts in silver alloy. EXAMPLE OF ELECTRICAL WIRING R N S T 1 N 1 3 5 13 2 4 98 96 14 R - RESET 97 95 2 1 0 - STOP R 97 95 2 4 6 98 96 Nominal insulation tension Ui 380V~ A2 2 1 Continuous duty nominal current Ith 15A 1 A1 Operating nominal current Ie 220V- 250V~ 380V~ Resistive load AC-12 - 10A 10A Inductive load AC-15 - 0,2A 1,5A Continuous current DC-13 0,2A - - HOMOLOGATION AND STANDARDS Complies with EN 60947-5-1 standards. Corresponding to the requirements provided in the R.3.B. chapter of the applied technical specifications of D.M. dated December 1st 1975. BO1BM with I.S.P.E.S.L. homologation. INSTALLATION Direct installation on the pipe. In case of fluid temperatures higher than the maximum allowed, connect the pressure switch to the pipe by inserting a metallic spiral between the pressure switch and the pipe to facilitate heat dispersion. OPERATION When it is reached the blocking value of the pressure: 1-2 opens. To reset wait until the pressure drops below differential’s value and operate the reset button. CONNECTION EXAMPLE OF B01M combined with B01 control pressure switch R S N T 1 N 1 3 5 13 2 4 98 96 R - RESET 14 97 95 0 - STOP R 97 95 2 4 6 98 96 P A2 2 1 2 4 1 A1 1 Blocking Control pressure pressure switch FEATURES Elements in contact with the fluid are in stainless steel, laser welded. Base, cover in V0 self-extinguishing, shockproof thermoplastic material. Output connections with PVC cable gland. Sensing element with stainless steel membrane. Internal regulation: the cover is made to be welded after setting and testing. Maximum temperature of the controlled fluid 120 °C. Pressure switch body admissible temperature -35 ÷ 80°C. Storage and transport temperature -35 ÷ 80 °C. Unit weight 0,14 Kg.