Fantini Cosmi ON/OFF thermostat 1 output L02BM1A 230V

L02B.. ON/OFF - P.I.D. thermostats with flush mounting For 1-outlet heating or cooling systems with 1 probe. Dimensions (mm) Sensor Power supply Num Measur- Resolution Probe accuracy Degree of out- ing range protection puts °C °C 1 NTC 10K* probe LS130 L02BI1A 12Vac/dc 1 -40 - 105 0.1(-19.9-99.9), 1 <±0.3°C(-40-100), ±1°C IP55 (panel) included 1 NTC 10K* probe LS130 L02BM1A 230Vac 1 -40 - 105 0.1(-19.9-99.9), 1 <±0.3°C(-40-100), ±1°C IP55 (panel) included ELECTRICAL CHARACTERISTICS Output on single-pole relay in deviation. Contact rating 16(4)A 240 Va.c. Power consumption 2W. REGULATIONS AND APPROVALS Compliant with EN60730-1, EN60730-2-9, EN55022 (CLASS B), EN50082-1. INSTALLATION Flush mounting (panel) with fixing brackets. OPERATION Type of control: can operate in ON/OFF or PID mode. ON/OFF control: in ON/OFF mode, the output is ON or OFF depending on the input temperature, setpoint (1SP) and hysteresis value (1HY). Hysteresis indicates the magnitude of the setpoint temperature deviation to reactivate the output. PID control: in PID mode the output is ON for a fraction of cycle time 1CT. The cycle time characterises the dynamics of the system to be controlled and influences the accuracy of the control. Proportional control. Integrative proportional control. 8  HEATING ON/OFF CONTROL ON/OFF CONTROL IN COOLING The heating output switches off when the The heating output switches on when the temperature is above the setpoint temperature is above the setpoint TEMPERATURE TEMPERATURE SP SP HY The output is ON when the The output is temperature is OFF when the below the setpoint temperature OUTPUT OUTPUT + hysteresis is below the setpoint + hysteresis TIME TIME PROPORTIONAL CONTROL (P) PROPORTIONAL-INTEGRATIVE CONTROL (PI) IN HEATING IN HEATING Overshoot Overshoot steady-state error SP SP TEMPERATURE TEMPERATURE proportional band integral control proportional band process band temperature process temperature TIME TIME PROPORTIONAL-INTEGRATIVE-DERIVATIVE (PID) HEATING CONTROL Overshoot L SP TEMPERATURE proportional band process temperature TIME ELECTRICAL CHARACTERISTICS NTC10k inputs. Configurable parameters: „ cooling or heating function by assigning positive or negative sign to the differential or proportional band respectively; „ minimum or maximum setpoint limits; „ ON or OFF status of the output in the event of a defective probe. Operating temperature -10 to 50°C. IP55 degree of protection when properly installed in panel with sealing gasket. ON/OFF button on the front. ACCESSORIES LS130 LT312U Transformer 230/12V 50-60Hz 3VA NTC10k probe, scale range from -40 to 105°C, 2 wires. 9 MODE D’EMPLOI Nous vous remercions d’avoir choisi un produit Fantini Cosmi. Pour que votre instrument soit le plus sûr et le plus performant possible, il est indispensable d’en lire attentivement le mode d’emploi. L02B... L22E Adresse pour la communication avec PC Version non disponible). FANTINI COSMI S.p.A. Via dell’Osio, 6 20090 Caleppio di Settala, Milano, ITALY L22EI1A-L22EM1A L02BI1A-L02BM1A Ph. +39 02 956821 | Fax +39 02 95307006 [email protected] [email protected] L02BI1A/L22EI1A 12Vac/dc±10%, 3W L02BM1A-L22EM1A 230Vac±10%, 50/60Hz, 3W OUT1 16(4)A 240Vac L22E--: 0-1V (LS160A) L02B--: NTC 10K (LS130) L22E--: 0…100% U.R. L02B--: -40…105°C L22E…: <±0.7%r.H. dans la plage de mesure L02B…: <±0.3°C -40…100°C; ±1°C dans une autre plage de mesure -10 … +50°C; 15…80% r.H. EN60730-1; EN60730-2-9; EN55022 (Class B); EN50082-1…