3M FP-301-1-Green-100' Heat Shrink Tubing
The 3M Heat Shrink Tubing (SKU 3G-OTH-53305) is a standard heat shrink tubing product in green, featuring a 1-inch inner diameter before shrinking and a 0.5-inch inner diameter after shrinking. It has a 2:1 shrink…
SKU 3G-OTH-53305
Also listed as: FP3011Green100 · FP 301 1 Green 100 · FP-301-1-Green-100
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The 3M Heat Shrink Tubing (SKU 3G-OTH-53305) is a standard heat shrink tubing product in green, featuring a 1-inch inner diameter before shrinking and a 0.5-inch inner diameter after shrinking. It has a 2:1 shrink ratio and comes in a 100-foot length per pack, with three packs included. This tubing is manufactured by 3M under part number FP-301-1-Green-100'.
Frequently Asked Questions
What is 3M Heat Shrink Tubing used for?
3M Heat Shrink Tubing is used to insulate and protect electrical wires, cables, and connections from moisture, abrasion, and environmental damage. It is commonly applied in industrial maintenance, automotive wiring, and electronics assembly where a reliable, tight-fitting insulation layer is required.
What are the specifications of 3M Heat Shrink Tubing FP-301-1-Green-100'?
This 3M heat shrink tubing has a 1-inch inner diameter before shrinking and a 0.5-inch inner diameter after shrinking, with a 2:1 shrink ratio. It is green, comes in a 100-foot length per pack, and includes three packs. The manufacturer part number is FP-301-1-Green-100'.
Where to buy 3M Heat Shrink Tubing in worldwide?
3G Electric supplies 3M Heat Shrink Tubing worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact 3G Electric for pricing and availability on this FP-301-1-Green-100' tubing.
How to install 3M Heat Shrink Tubing?
To install, slide the tubing over the connection or wire before shrinking. Apply heat evenly using a heat gun or hot-air blower at approximately 120–150 °C until the tubing shrinks tightly around the substrate. Allow it to cool before handling. Always follow standard electrical safety practices.
Used in
Common applications for 3M3M Products
3G Electric supplies 3M standard heat shrink tubing. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
