3M FP-301 Standard Heat Shrink Tubing
The 3M Heat Shrink Thin-Wall Tubing (SKU 3G-OTH-53935) is a standard heat shrink tubing product from 3M, available in black. It features a 4-inch inner diameter before shrinking and a 2-inch inner diameter after…
SKU 3G-OTH-53935
Also listed as: FP301 · FP 301
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The 3M Heat Shrink Thin-Wall Tubing (SKU 3G-OTH-53935) is a standard heat shrink tubing product from 3M, available in black. It features a 4-inch inner diameter before shrinking and a 2-inch inner diameter after shrinking, with a length of 50 feet (Manufacturer Part Number FP-301).
Frequently Asked Questions
What is 3M Heat Shrink Thin-Wall Tubing used for?
3M Heat Shrink Thin-Wall Tubing is used for insulating, protecting, and bundling wires and cables in electrical, automotive, and industrial applications. It shrinks to a tight fit when heated, providing mechanical protection and electrical insulation. The 4-inch before-shrink inner diameter accommodates large cable bundles or connectors.
What are the specifications of 3M Heat Shrink Thin-Wall Tubing FP-301?
The 3M Heat Shrink Thin-Wall Tubing FP-301 has a 4-inch inner diameter before shrinking and a 2-inch inner diameter after shrinking. It is 50 feet long, black in color, and made by 3M. This standard tubing is suitable for applications requiring a 2:1 shrink ratio and thin-wall construction.
Where to buy 3M Heat Shrink Thin-Wall Tubing FP-301 worldwide?
You can source 3M Heat Shrink Thin-Wall Tubing FP-301 worldwide through 3G Electric. As a global industrial equipment distributor since 1990, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact 3G Electric for availability and lead time on this 3M tubing.
How to install 3M Heat Shrink Thin-Wall Tubing?
To install 3M Heat Shrink Thin-Wall Tubing, slide the tubing over the cable or connector before shrinking. Apply heat evenly using a heat gun or oven at the recommended temperature (typically around 121 °C). The tubing will shrink to a 2-inch inner diameter, forming a tight, insulating seal. Allow it to cool before handling.
Used in
Common applications for 3M3M Products
3G Electric supplies 3M standard heat shrink tubing. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
