3M Heat Shrink Tubing: 1 in I.D. Before Shrinking, 0.5 in I.D. After Shrinking
The 3M Heat Shrink Tubing (SKU 3G-OTH-53727) is a standard heat shrink tubing in green, with a 1-inch inner diameter before shrinking and a 0.5-inch inner diameter after shrinking. It features a 2:1 shrink ratio and…
SKU 3G-OTH-53727
Also listed as: FP301148GREEN24PCS · FP301 1 48 GREEN 24 PCS · FP301-1-48-GREEN-24-PCS
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The 3M Heat Shrink Tubing (SKU 3G-OTH-53727) is a standard heat shrink tubing in green, with a 1-inch inner diameter before shrinking and a 0.5-inch inner diameter after shrinking. It features a 2:1 shrink ratio and comes in 4-foot lengths, with 24 pieces per pack (MPN FP301-1-48"-GREEN-24 PCS).
Frequently Asked Questions
What is 3M Heat Shrink Tubing used for?
3M Heat Shrink Tubing is used to insulate and protect electrical wires, cables, and connections from moisture, abrasion, and environmental damage. It is commonly applied in industrial maintenance, automotive wiring, and electronics repair where a durable, color-coded insulation layer is required.
What are the specifications of 3M Heat Shrink Tubing?
This 3M Heat Shrink Tubing has a 1-inch inner diameter before shrinking and a 0.5-inch inner diameter after shrinking, with a 2:1 shrink ratio. It comes in 4-foot lengths, 24 pieces per pack, in green color. The manufacturer part number is FP301-1-48"-GREEN-24 PCS.
Where to buy 3M Heat Shrink Tubing in worldwide?
You can source 3M Heat Shrink Tubing worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this product.
How to install 3M Heat Shrink Tubing?
To install 3M Heat Shrink Tubing, slide the tubing over the wire or connection before shrinking. Apply heat evenly using a heat gun or hot air blower at the recommended temperature (typically around 121 °C). The tubing will shrink to a 2:1 ratio, forming a tight, insulating seal around the component.
Used in
Common applications for 3M3M Products
3G Electric supplies 3M standard heat shrink tubing. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
