| Pump Type | Electric pump with oscillating piston discharge |
| Seal Type | Piston seal embedded in cylinder |
| Cylinder Fluid | Hydraulic oil |
| Mounting Method | 4 screws with gaskets supplied in terminal box |
| Valve Actuation | Lever system |
| Mounting Pattern | 4-hole square pattern with 90° rotation positions |
| Certification Iso | ISO 9001 |
| Drive System Type | Electro-hydraulic |
| Optional Features | End-of-travel contacts, auxiliary contacts, two-speed travel limitation |
| Application Domain | Gas burner fuel supply |
| Position Indicator | Disc with window observation |
| Gas Types Supported | Type I, II, III and air |
| Servomotor Mounting | Can be mounted or replaced under gas pressure without sealing joint |
| Disposal Requirement | Must comply with local legislation; not to be disposed as domestic waste |
| Material Content Note | Contains electrical and electronic components and hydraulic oil |
| Maintenance Requirement | Must be performed by specialists |
| Installation Requirement | Must be performed by specialists |
| Commissioning Requirement | Must be performed by specialists |
| Operation Characteristics | Slow opening and rapid closing |
| Pressure Regulation Method | Gas pressure adjusted based on combustion air pressure to maintain constant gas/air ratio across load range |
| Constant Pressure Regulation Model | SKP20.130.. |
| Integrated Pressure Regulator Models | SKP2... series |
