TRITAN Insert Bearing: UC201-8, 1/2 in Bore, 1 27/32 in OD, 0.669 in Outer Ring Wd
The TRITAN UC201-8 is a general purpose spherical insert bearing with a radial/deep groove ball design. It features a 1/2 inch bore, 1 27/32 inch outer diameter, and 0.669 inch outer ring width, secured by set…
SKU 3G-OTH-105508
Also listed as: UC2018 · UC201 8
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN UC201-8 is a general purpose spherical insert bearing with a radial/deep groove ball design. It features a 1/2 inch bore, 1 27/32 inch outer diameter, and 0.669 inch outer ring width, secured by set screws. This inch-system bearing is double sealed for protection and is identified by the industry number UC201-8.
Frequently Asked Questions
What is the TRITAN UC201-8 insert bearing used for?
The TRITAN UC201-8 is a general purpose spherical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design accommodates moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TRITAN UC201-8 bearing?
The TRITAN UC201-8 has a 1/2 in bore, 1 27/32 in outer diameter, and 0.669 in outer ring width. It is an inch-system radial/deep groove ball bearing with set screw locking and double-sealed closure. The manufacturer part number and bearing industry number are both UC201-8.
Where to buy the TRITAN UC201-8 bearing worldwide?
You can source the TRITAN UC201-8 bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide competitive pricing and reliable sourcing for this TRITAN insert bearing.
How to install the TRITAN UC201-8 insert bearing?
To install the TRITAN UC201-8, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to secure the inner ring. Ensure the bearing is aligned and rotates freely. For best results, follow standard bearing installation practices and avoid over-tightening.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN general purpose spherical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
