TRITAN Insert Bearing: SB208-24, 1 1/2 in Bore, 3 9/64 in OD, 0.71 in Outer Ring Wd
The TRITAN SB208-24 is a general purpose spherical insert bearing with a radial/deep groove ball design. It features a 1 1/2 in bore, 3 9/64 in OD, and 0.71 in outer ring width, with double sealed closure and set…
SKU 3G-OTH-105222
Also listed as: SB20824 · SB208 24
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN SB208-24 is a general purpose spherical insert bearing with a radial/deep groove ball design. It features a 1 1/2 in bore, 3 9/64 in OD, and 0.71 in outer ring width, with double sealed closure and set screw locking. This inch-system bearing is identified by industry number SB208-24.
Frequently Asked Questions
What is the TRITAN SB208-24 insert bearing used for?
The TRITAN SB208-24 is a general purpose spherical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TRITAN SB208-24 bearing?
The TRITAN SB208-24 has a 1 1/2 in bore, 3 9/64 in OD, and 0.71 in outer ring width. It is an inch-system radial/deep groove ball bearing with double sealed closure and set screw locking. The industry number is SB208-24, and the manufacturer part number is SB208-24.
Where to buy TRITAN SB208-24 bearings worldwide?
3G Electric supplies the TRITAN SB208-24 bearing worldwide. As a global industrial distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this inch-system insert bearing to any international destination.
How to install a TRITAN SB208-24 set screw bearing?
To install the TRITAN SB208-24, clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly using a hex key to secure the inner ring to the shaft. Ensure proper alignment and apply lubricant per manufacturer guidelines. Double sealed bearings require no additional sealing.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN general purpose spherical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
