TRITAN Insert Bearing: SB205-14, 7/8 in Bore, 2 3/64 in OD, 0.593 in Outer Ring Wd
The TRITAN SB205-14 is a general purpose spherical insert bearing with a radial/deep groove ball design. It features a 7/8 inch bore, 2 3/64 inch outer diameter, and 0.593 inch outer ring width, secured by set…
SKU 3G-OTH-107801
Also listed as: SB20514 · SB205 14
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN SB205-14 is a general purpose spherical insert bearing with a radial/deep groove ball design. It features a 7/8 inch bore, 2 3/64 inch outer diameter, and 0.593 inch outer ring width, secured by set screws. This inch-system bearing is double sealed for protection and identified by industry number SB205-14.
Frequently Asked Questions
What is the TRITAN SB205-14 insert bearing used for?
The TRITAN SB205-14 is a general purpose spherical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TRITAN SB205-14 bearing?
The TRITAN SB205-14 has a 7/8 inch bore, 2 3/64 inch outer diameter, and 0.593 inch outer ring width. It uses set screws for shaft locking, is double sealed, and is a radial/deep groove ball type. The system of measurement is inch, with industry number SB205-14.
Where to buy the TRITAN SB205-14 bearing worldwide?
You can source the TRITAN SB205-14 bearing worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we supply genuine TRITAN components for industrial applications.
How to install the TRITAN SB205-14 insert bearing?
To install the TRITAN SB205-14, clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly using a hex key to secure the inner ring to the shaft. Ensure proper alignment and apply grease if needed. Double seals require no additional lubrication after installation.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN general purpose spherical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
