TRITAN Insert Bearing: SB202-10G, 5/8 in Bore, 1 9/16 in OD, 0.472 in Outer Ring Wd
The TRITAN SB202-10G is a general purpose spherical insert bearing of the radial/deep groove ball type, featuring a 5/8 in bore, 1 9/16 in OD, and 0.472 in outer ring width. It is double sealed and secured with set…
SKU 3G-OTH-99245
Also listed as: SB20210G · SB202 10G
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN SB202-10G is a general purpose spherical insert bearing of the radial/deep groove ball type, featuring a 5/8 in bore, 1 9/16 in OD, and 0.472 in outer ring width. It is double sealed and secured with set screws, with an inch system of measurement and bearing industry number SB202-10G.
Frequently Asked Questions
What is the TRITAN SB202-10G insert bearing used for?
The TRITAN SB202-10G is a general purpose spherical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design accommodates moderate radial and axial loads, while the double seals protect against contaminants in dusty or wet environments.
What are the specifications of the TRITAN SB202-10G bearing?
The TRITAN SB202-10G has a 5/8 in bore, 1 9/16 in OD, and 0.472 in outer ring width. It is a radial/deep groove ball insert bearing with double seals and set screw locking. The inch-system bearing carries industry number SB202-10G and is manufactured by TRITAN.
Where to buy the TRITAN SB202-10G bearing worldwide?
3G Electric supplies the TRITAN SB202-10G bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this TRITAN insert bearing to any country.
How to install the TRITAN SB202-10G insert bearing?
To install the TRITAN SB202-10G, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly against the shaft using a hex key. Ensure the bearing is aligned and rotates freely. Double seals require no additional lubrication before installation.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN general purpose spherical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
