Goods are offered EXW Singapore — collection from our Singapore facility.

3G Electric
RAYMOND Die Spring, ISO-D Series, Silicon Wire, 2 33/64 in Lng, 2 PK - Die Springs
RAYMONDDie Springs

RAYMOND Die Spring, ISO-D Series, Silicon Wire, 2 33/64 in Lng, 2 PK

3G Electric supplies the RAYMOND Die Spring (SKU 306710D, MPN 306710D), a cylindrical, closed, ground-end die spring made from silicon wire in ISO-D series. Each pack contains two springs with a length of 2 33/64 in.

SKU 3G-OTH-745702

Also listed as: 306710 D · 306710-D

Brand
RAYMOND
Item
Die Spring, ISO-D Series, Silicon Wire, 2 33/64 in Lng, 2 PK
Part Number
306710D
Category
Die Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

RAYMOND
Manufacturer Part Number
306710D
Series
ISO-D
Type
Cylindrical Shape, Closed, Ground End, 2 PK
Material
Alloy Steel; Silicon Wire
Lng
2 33/64 in
Finish
Chromium
End Type
Closed, Ground
Standards
ASTM A877
Free Length
2-33/64 in Free Length This refers to the entire spring length when no force is acting on it.
Spring Rate
2,586 lb/in Spring Rate This refers to how much the spring moves when pulled by a known load or force.
Catalog Page
N/A
Product Type
Die Spring
Solid Height
2.09 in
Spring Shape
Cylindrical
Inside Diameter
0.79 in Inside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Die Spring Color
Yellow Die Spring Color This refers to the specific colors that indicate the performance duty rating of the spring, which may vary by spring series.
Outside Diameter
1.5 in Outside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Country of Origin
Japan (subject to change)
System of Measurement
Inch

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

RAYMOND Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

3G Electric supplies the RAYMOND Die Spring (SKU 306710D, MPN 306710D), a cylindrical, closed, ground-end die spring made from silicon wire in ISO-D series. Each pack contains two springs with a length of 2 33/64 in.

Frequently Asked Questions

What is the RAYMOND Die Spring 306710D used for?

The RAYMOND Die Spring 306710D is used in stamping dies, metal forming, and industrial tooling to provide controlled force and return action. Its silicon wire construction and closed, ground ends ensure consistent performance under high cyclic loads. 3G Electric supplies this genuine component across 14 industrial departments.

What are the specifications of the RAYMOND Die Spring 306710D?

The RAYMOND Die Spring 306710D is a cylindrical, closed, ground-end die spring made from silicon wire in the ISO-D series. Each pack contains two springs with a length of 2 33/64 in. It is designed for precision tooling applications requiring reliable force and durability.

Where to buy the RAYMOND Die Spring 306710D worldwide?

3G Electric supplies the RAYMOND Die Spring 306710D worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source this genuine component and deliver it to your facility. Contact us for availability and lead time to your location.

How to select the correct RAYMOND die spring for your application?

To select the correct RAYMOND die spring, match the spring’s length, series (e.g., ISO-D), and material (silicon wire) to your die’s load and deflection requirements. Ensure the closed, ground ends fit your tooling. 3G Electric can help interpret your demand and source the right spring across 14 departments.

Not sure this is the right part? Photo-identify it→

RAYMOND Products

3G Electric supplies RAYMOND die springs. We supply genuine products and their technical documentation.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

More from RAYMOND

View all RAYMOND parts →
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.97-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling applications
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.97-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling applications
Cylindrical die spring with closed, ground ends. Made from silicon alloy steel wire. Length 3 1/2 in, outer diameter 1.58 in. Used in stamping dies, metal forming tools, and industrial presses to absorb shock and return components to position
RAYMOND
Cylindrical die spring with closed, ground ends. Made from silicon alloy steel wire. Length 3 1/2 in, outer diameter 1.58 in. Used in stamping dies, metal forming tools, and industrial presses to absorb shock and return components to position
Cylindrical die spring with closed, ground ends, made from silicon wire. Part of the ISO-D series, it measures 2 33/64 inches in length and is supplied in a pack of 15. Used in stamping and forming dies to absorb shock and control motion in high-cycle industrial tooling applications
RAYMOND
Cylindrical die spring with closed, ground ends, made from silicon wire. Part of the ISO-D series, it measures 2 33/64 inches in length and is supplied in a pack of 15. Used in stamping and forming dies to absorb shock and control motion in high-cycle industrial tooling applications
Cylindrical die spring made from alloy steel with closed and ground ends. Measures 2-1/2 inches in length. Supplied in a 10-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring made from alloy steel with closed and ground ends. Measures 2-1/2 inches in length. Supplied in a 10-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 3 1/2 inches in length with a 1.97-inch outer diameter. Suitable for stamping dies, metal forming, and tooling applications requiring controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 3 1/2 inches in length with a 1.97-inch outer diameter. Suitable for stamping dies, metal forming, and tooling applications requiring controlled force and return action under high cyclic loads
Cylindrical die spring with closed and ground ends, made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.26-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring with closed and ground ends, made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.26-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
JIS-series die spring made of alloy steel with a cylindrical shape and closed, ground ends. Length of 63/64 in. Supplied in a 10-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
RAYMOND
JIS-series die spring made of alloy steel with a cylindrical shape and closed, ground ends. Length of 63/64 in. Supplied in a 10-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 2 1/64 in length and 0.79 in outer diameter. Part of the ISO-D series. Supplied in a pack of 5. Used in stamping dies, metal forming, and tooling applications to provide controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 2 1/64 in length and 0.79 in outer diameter. Part of the ISO-D series. Supplied in a pack of 5. Used in stamping dies, metal forming, and tooling applications to provide controlled force and return action under high cyclic loads

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first