Goods are offered EXW Singapore — collection from our Singapore facility.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
RAYMOND Die Spring, ISO-D Series, Silicon Wire, 2 63/64 in Lng, 3 PK - Die Springs
RAYMONDDie Springs

RAYMOND Die Spring, ISO-D Series, Silicon Wire, 2 63/64 in Lng, 3 PK

The RAYMOND Die Spring (SKU 304712D, MPN 304712D) is a cylindrical, closed, ground-end spring in the ISO-D series, made from silicon wire. Supplied as a 3-pack with a length of 2 63/64 in, it is a die spring of the…

SKU 3G-OTH-745685

Also listed as: 304712 D · 304712-D

Brand
RAYMOND
Item
Die Spring, ISO-D Series, Silicon Wire, 2 63/64 in Lng, 3 PK
Part Number
304712D
Category
Die Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

RAYMOND
Manufacturer Part Number
304712D
Series
ISO-D
Type
Cylindrical Shape, Closed, Ground End, 3 PK
Material
Alloy Steel; Silicon Wire
Lng
2 63/64 in
Finish
Chromium
End Type
Closed, Ground
Standards
ASTM A877
Free Length
2-63/64 in Free Length This refers to the entire spring length when no force is acting on it.
Spring Rate
612 lb/in Spring Rate This refers to how much the spring moves when pulled by a known load or force.
Catalog Page
N/A
Product Type
Die Spring
Solid Height
2.24 in
Spring Shape
Cylindrical
Inside Diameter
0.79 in Inside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Die Spring Color
Blue Die Spring Color This refers to the specific colors that indicate the performance duty rating of the spring, which may vary by spring series.
Outside Diameter
1.5 in Outside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Country of Origin
USA (subject to change)
System of Measurement
Inch

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

RAYMOND Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The RAYMOND Die Spring (SKU 304712D, MPN 304712D) is a cylindrical, closed, ground-end spring in the ISO-D series, made from silicon wire. Supplied as a 3-pack with a length of 2 63/64 in, it is a die spring of the Alloy Steel/Bronze type.

Frequently Asked Questions

What is a RAYMOND die spring used for?

A RAYMOND die spring is used in stamping dies, metal forming, and tooling applications to provide controlled force and return action. Its cylindrical, closed, ground-end design ensures stable performance under high cyclic loads in industrial press operations.

What are the specifications of the RAYMOND 304712D die spring?

The RAYMOND 304712D die spring is a 3-pack of cylindrical, closed, ground-end springs in the ISO-D series. It is made from silicon wire, measures 2 63/64 in length, and is classified as an Alloy Steel/Bronze type. The manufacturer part number is 304712D.

Where to buy RAYMOND die springs worldwide?

3G Electric supplies RAYMOND die springs worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine parts like the 304712D to your facility, ensuring compliance with international shipping requirements.

How to select the right RAYMOND die spring for your application?

To select the right RAYMOND die spring, match the spring's length, series (ISO-D), and material (silicon wire) to your die's load and deflection requirements. Ensure the cylindrical, closed, ground-end design fits your tooling. Consult a technical specialist for application-specific guidance.

Not sure this is the right part? Photo-identify it→

RAYMOND Products

3G Electric supplies RAYMOND die springs. We supply genuine products and their technical documentation.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

More from RAYMOND

View all RAYMOND parts →
This JIS-series die spring is made of alloy steel with a cylindrical shape and closed, ground ends. Each spring measures 1 37/64 inches in length. Supplied in a 10-pack, it is suited for use in stamping dies, metal-forming tools, and press fixtures where controlled high-force return is required
RAYMOND
This JIS-series die spring is made of alloy steel with a cylindrical shape and closed, ground ends. Each spring measures 1 37/64 inches in length. Supplied in a 10-pack, it is suited for use in stamping dies, metal-forming tools, and press fixtures where controlled high-force return is required
Cylindrical die spring made from alloy steel with closed and ground ends. Measures 5-1/2 inches in length and 2 inches in outer diameter. Used in stamping dies, metal forming, and tooling applications to provide controlled force and return action
RAYMOND
Cylindrical die spring made from alloy steel with closed and ground ends. Measures 5-1/2 inches in length and 2 inches in outer diameter. Used in stamping dies, metal forming, and tooling applications to provide controlled force and return action
This RAYMOND die spring is an ISO-D series cylindrical spring made of alloy steel with closed and ground ends. It measures 63/64 in length and is supplied in a pack of 10. Designed for use in stamping dies, metal forming tools, and industrial presses, it provides controlled force and return action under high cyclic loads
RAYMOND
This RAYMOND die spring is an ISO-D series cylindrical spring made of alloy steel with closed and ground ends. It measures 63/64 in length and is supplied in a pack of 10. Designed for use in stamping dies, metal forming tools, and industrial presses, it provides controlled force and return action under high cyclic loads
Cylindrical die spring made from silicon wire with closed, ground ends. Each spring measures 1 inch in length with a 0.38-inch outer diameter. Supplied in a 10-pack. Used in stamping dies, metal forming, and industrial tooling to absorb shock and maintain consistent force
RAYMOND
Cylindrical die spring made from silicon wire with closed, ground ends. Each spring measures 1 inch in length with a 0.38-inch outer diameter. Supplied in a 10-pack. Used in stamping dies, metal forming, and industrial tooling to absorb shock and maintain consistent force
This die spring is a cylindrical, closed, ground-end spring made from silicon wire in the ISO-D series. It measures 7 63/64 inches in length with a 1.97-inch outer diameter. Used in stamping dies, metal forming, and tooling applications to absorb shock and maintain consistent force
RAYMOND
This die spring is a cylindrical, closed, ground-end spring made from silicon wire in the ISO-D series. It measures 7 63/64 inches in length with a 1.97-inch outer diameter. Used in stamping dies, metal forming, and tooling applications to absorb shock and maintain consistent force
JIS-series cylindrical die spring made from silicon wire. Closed and ground ends provide consistent force in stamping dies, metal forming tools, and industrial presses. Each pack contains 10 springs, each 1 3/8 inches long
RAYMOND
JIS-series cylindrical die spring made from silicon wire. Closed and ground ends provide consistent force in stamping dies, metal forming tools, and industrial presses. Each pack contains 10 springs, each 1 3/8 inches long
Cylindrical die spring with closed, ground ends made from alloy steel. Measures 6 inches in length with a 1.5 inch outer diameter. Part of the US series, designed for use in stamping dies, metal forming tools, and other press applications requiring controlled force and return action under cyclic loads
RAYMOND
Cylindrical die spring with closed, ground ends made from alloy steel. Measures 6 inches in length with a 1.5 inch outer diameter. Part of the US series, designed for use in stamping dies, metal forming tools, and other press applications requiring controlled force and return action under cyclic loads
This RAYMOND die spring is an ISO-D series alloy steel spring with a cylindrical shape and closed, ground ends. It measures 2 33/64 inches in length and is sold in a pack of 3. Designed for use in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads
RAYMOND
This RAYMOND die spring is an ISO-D series alloy steel spring with a cylindrical shape and closed, ground ends. It measures 2 33/64 inches in length and is sold in a pack of 3. Designed for use in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first