PARKER 179C-6-6 Standard Sleeve Brass Compression Fitting
The PARKER Compression Fitting Elbow (MPN 179C-6-6) is a standard sleeve brass compression fitting with a 3/8 in OD x 3/8 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack. This product is…
SKU 3G-OTH-482258
Also listed as: 179C66 · 179C 6 6
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 179C-6-6) is a standard sleeve brass compression fitting with a 3/8 in OD x 3/8 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack. This product is part of 3G Electric's broad industrial supply across 14 departments, with specialist depth in combustion, pumps, and controls ensuring accurate sourcing and support.
Frequently Asked Questions
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects two tubes or a tube to a pipe at a 90-degree angle, creating a leak-tight seal in pneumatic, hydraulic, and instrumentation systems. It is commonly used in industrial fluid power, process control, and HVAC applications where reliable, vibration-resistant connections are required.
What are the specifications of the PARKER 179C-6-6 compression fitting elbow?
The PARKER 179C-6-6 is a standard sleeve brass compression fitting elbow with a 3/8 in OD tube size and 3/8 in pipe fitting size, configured as Compression x MNPT. It is sold in a 10-pack. This fitting is designed for use with copper, brass, or plastic tubing in low- to medium-pressure systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings worldwide, handling full logistics and customs clearance for international delivery. As a global industrial solutions provider, we source genuine PARKER parts like the 179C-6-6 elbow across 14 departments, with specialist expertise in combustion, pumps, and controls to ensure accurate order fulfillment.
How to install a PARKER compression fitting elbow?
To install a PARKER compression fitting elbow, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer specifications. Avoid over-tightening to prevent tube deformation. Always use a tube cutter for a clean, square cut before assembly.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
