PARKER Standard Sleeve Brass Compression Fitting, 5/16 in OD x 5/16 in OD, 10 PK
The PARKER Compression Fitting Elbow (MPN 165C-5) is a standard sleeve brass compression fitting with 5/16 in OD x 5/16 in OD fitting size, supplied in a 10-pack. This product is a genuine PARKER component, sourced…
SKU 3G-OTH-482170
Also listed as: 165C5 · 165C 5
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 165C-5) is a standard sleeve brass compression fitting with 5/16 in OD x 5/16 in OD fitting size, supplied in a 10-pack. This product is a genuine PARKER component, sourced and supported by 3G Electric across 14 industrial departments, with specialist depth in combustion, pumps and controls.
Frequently Asked Questions
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects two tubes or pipes at a 90-degree angle in fluid or gas systems. It is commonly used in instrumentation, pneumatic, hydraulic, and lubrication applications where a leak-tight, reusable joint is required without soldering or welding.
What are the specifications of the PARKER 165C-5 compression fitting elbow?
The PARKER 165C-5 is a standard sleeve brass compression fitting elbow with 5/16 in OD x 5/16 in OD fitting size. It is supplied in a 10-pack. The product is a genuine PARKER component, suitable for use with copper, brass, or plastic tubing in low- to medium-pressure systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies and delivers genuine PARKER compression fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility. Contact us for availability and lead time on the PARKER 165C-5 or any other PARKER fitting.
How to install a PARKER compression fitting elbow?
To install a PARKER compression fitting elbow, slide the nut and sleeve onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand until snug. Use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten, as this can damage the sleeve or tubing. Always follow the manufacturer's instructions.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
