PARKER Standard Sleeve Brass Compression Tee Fitting
The PARKER Compression Tee Fitting (MPN 172C-6-4) is a standard sleeve brass compression fitting with 3/8 in OD x 3/8 in OD x 1/4 in pipe fitting sizes, supplied in a 10-pack. 3G Electric interprets your demand for…
SKU 3G-OTH-482146
Also listed as: 172C64 · 172C 6 4
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 172C-6-4) is a standard sleeve brass compression fitting with 3/8 in OD x 3/8 in OD x 1/4 in pipe fitting sizes, supplied in a 10-pack. 3G Electric interprets your demand for genuine industrial fittings and delivers this PARKER component across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is the PARKER Compression Tee Fitting used for?
The PARKER Compression Tee Fitting (172C-6-4) joins three tubing lines in a T-configuration for fluid or air systems. It is commonly used in instrumentation, pneumatic controls, and hydraulic circuits where a leak-tight brass connection is required at 3/8 in OD x 3/8 in OD x 1/4 in pipe sizes.
What are the specifications of the PARKER 172C-6-4 tee fitting?
This PARKER standard sleeve brass compression tee fitting has a 3/8 in OD x 3/8 in OD x 1/4 in pipe fitting size. It is supplied in a 10-pack with manufacturer part number 172C-6-4. The material is brass, suitable for general industrial fluid and air applications.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies genuine PARKER compression fittings worldwide. We interpret your demand, source the correct part, and handle logistics and customs for delivery to your facility. Contact us for availability and lead time on the 172C-6-4 tee fitting or other PARKER components.
How to install a PARKER brass compression tee fitting?
To install a PARKER brass compression tee, slide the nut and sleeve onto the tube, insert the tube into the fitting body until seated, then tighten the nut by hand followed by a wrench turn per manufacturer torque specs. Avoid over-tightening to prevent sleeve deformation. Always use proper tube support.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
