PARKER Standard Sleeve Brass Compression Fitting Elbow
PARKER Compression Fitting Elbow, a standard sleeve brass compression fitting with a 5/16 in OD x 1/8 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack (MPN 169C-5-2). 3G Electric…
SKU 3G-OTH-482063
Also listed as: 169C52 · 169C 5 2
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
PARKER Compression Fitting Elbow, a standard sleeve brass compression fitting with a 5/16 in OD x 1/8 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack (MPN 169C-5-2). 3G Electric interprets your demand for this OEM-specified fitting, sources it across 14 industrial departments, and supports your application with specialist depth in combustion, pumps, and controls.
Frequently Asked Questions
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects tubing to threaded ports at a 90-degree angle, creating a leak-resistant seal in pneumatic, hydraulic, and instrumentation systems. It is commonly used in industrial fluid power, process control, and combustion applications where reliable, vibration-resistant connections are required.
What are the specifications of the PARKER 169C-5-2 compression fitting elbow?
The PARKER 169C-5-2 is a standard sleeve brass compression fitting elbow with a 5/16 in OD tube size and 1/8 in MNPT pipe thread. It is configured as Compression x MNPT and sold in a 10-pack. This OEM-specified fitting is suitable for use with copper, brass, or plastic tubing in low- to medium-pressure systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings like the 169C-5-2 elbow to customers worldwide. We interpret your demand, source the correct OEM-specified part across 14 industrial departments, and handle full logistics and customs clearance for delivery to your location. Contact us for availability and lead time.
How to install a PARKER compression fitting elbow?
To install a PARKER compression fitting elbow, slide the nut and sleeve onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand followed by 1 to 1.25 turns with a wrench. Avoid overtightening to prevent sleeve deformation. Always use a tube cutter for a clean, square cut before assembly.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
