PARKER Compression Tee Fitting: 5 mm OD x 5 mm OD x 5 mm OD Fitting Size, Brass
The PARKER Compression Tee Fitting (MPN 0104 05 00) is a standard sleeve brass compression fitting with a 5 mm OD x 5 mm OD x 5 mm OD fitting size and an overall length of 42 mm. 3G Electric interprets demand and…
SKU 3G-OTH-482271
Also listed as: 01040500 · 0104-05-00
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 0104 05 00) is a standard sleeve brass compression fitting with a 5 mm OD x 5 mm OD x 5 mm OD fitting size and an overall length of 42 mm. 3G Electric interprets demand and delivers this genuine industrial component across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting connects three tubes of equal outside diameter in a T-junction for pneumatic or hydraulic systems. It is commonly used in instrumentation, fluid power, and process control applications where a leak-tight, reusable brass fitting is required.
What are the specifications of the PARKER 0104 05 00 compression tee fitting?
The PARKER 0104 05 00 is a standard sleeve brass compression tee fitting with a 5 mm OD x 5 mm OD x 5 mm OD fitting size and an overall length of 42 mm. It is made of brass and is designed for use with 5 mm outside diameter tubing.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies genuine PARKER compression tee fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver this component across 14 departments, including pneumatics and instrumentation.
How to install a PARKER brass compression tee fitting?
To install a PARKER brass compression tee fitting, cut tubing squarely, deburr the end, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Do not overtighten.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
