Fireye UV5 Series UV Flame Scanners. The UV5-1 and UV5-2 are high-performance ultraviolet (UV) flame scanners designed for accurate and reliable flame monitoring in industrial and commercial burner systems. These UV scanners feature 6.5 ft. UL-rated cables, ensuring safe, efficient, and straightforward installation while meeting stringent safety and quality standards.

Fireye

UV90 Series UV Flame Scanners. The UV90 Series Scanners are state-of-the-art ultraviolet flame scanners specifically designed for both front and lateral (90°) mounting, offering enhanced flexibility and performance in a variety of flame detection applications. These versatile UV scanners are engineered to provide a clearer and more accurate view of the flame in applications where line-of-sight positioning can impact performance.

Fireye

UV90L Series UV Flame Scanners. The UV scanner is ideally suited for gaseous fuels (natural gas & propane). However, it can be used in detecting flames from standard fuel gases, some waste gases and light oil fuels such as No. 2 oil. Flames from heavier oils can be detected with UV scanners but the unburned fuel shroud and/or atomization shroud can block the passage of the UV from the flame zone to the UV tube, causing nuisance burner/boiler trips. Infrared detection is recommended for fuel oil heavier than No. 2, and some installations where waste gases are burned together with natural gas as the main flame.

Fireye

UV8A Series UV Flame Scanners. The UV8A Scanner is a 90° right-angle ultraviolet flame scanner designed for reliable flame detection. Compatible with M-Series, M-Series II, MicroM, FlameWorx, MB-2, D series controls, as well as Fireye® FLAME-MONITOR, BurnerLogix, and the Nexus System, the UV8A offers versatile integration for various burner management systems.

Fireye

InSight Series 4 95S4UV & 95IRS4 Flame Scanner. The Fireye InSight® Series 4 flame scanners, including models 95UVS4 and 95IRS4, are advanced, fully microprocessor-based devices featuring solid-state ultraviolet (UV) or infrared (IR) sensors. These integrated flame scanners eliminate the need for separate amplifiers or flame switch modules, offering streamlined installation and enhanced functionality.

Fireye

UV7SC Self-Check Flame Scanner. The UV7SC is a high-performance, self-check ultraviolet flame scanner, designed for continuous monitoring of gas or oil flames. It integrates with Fireye’s MBSERIES Multi-Burner and SBSERIES Single Burner controls, as well as the MBPF-100S and MB-600PF flame sensing modules.

Fireye

UV1AL Series UV Flame Scanners

Fireye

UV7A4, UV7A4-1-CEX & UV7R4 Flame Scanners. The UV7A4, UV7A4-1-CEX and UV7R4 are high-sensitivity ultraviolet (UV) flame scanners designed for monitoring gas or oil flames that cycle frequently. These non-self-check scanners integrate seamlessly with Fireye’s MBSERIES Multi-Burner control, SBSERIES Single Burner control, and the MBPF-100S and MB-600PF flame sensing modules, providing reliable flame detection for various industrial applications.

Fireye

Simplicity 65UV5 UV Flame Scanner. The 65UV5 scanner is available with a one-second or four-second flame failure response time (FFRT) depending on the model selected. The “E” versions are one-second FFRT, the non ”E” versions are four seconds FFRT. The Fireye 65UV5-1004QD and 1004EQD flame scanners provide an analog 4 to 20 mA output referenced to flame signal strength.