Dayton Pillow Block Bearing: 1/2 in Bore, Steel, Set Screws, 15/16 in Shaft Ht
The DAYTON Stamped Steel Pillow Block Ball Bearing (SKU 3G-OTH-102624) is an inch-system bearing with a 1/2 in bore, a 15/16 in shaft height, and a 4.187 in overall length. It features a steel construction with set…
SKU 3G-OTH-102624
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The DAYTON Stamped Steel Pillow Block Ball Bearing (SKU 3G-OTH-102624) is an inch-system bearing with a 1/2 in bore, a 15/16 in shaft height, and a 4.187 in overall length. It features a steel construction with set screws and a maximum speed of 6,000 RPM, and uses a 7/16 in mounting bolt size.
Frequently Asked Questions
What is a DAYTON pillow block bearing used for?
A DAYTON pillow block bearing supports rotating shafts in industrial machinery, conveyors, and material handling equipment. Its stamped steel housing with set screws secures the shaft, while the 1/2 in bore and 6,000 RPM rating suit moderate-speed applications across manufacturing and processing plants.
What are the specifications of the DAYTON pillow block bearing?
The DAYTON is a stamped steel pillow block ball bearing with a 1/2 in bore, 15/16 in shaft height, and 4.187 in overall length. It uses set screws for shaft locking, a 7/16 in mounting bolt, and has a maximum speed of 6,000 RPM. The system of measurement is inch.
Where to buy DAYTON pillow block bearings worldwide?
3G Electric supplies DAYTON pillow block bearings like the to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. As a global industrial sourcing partner, we provide genuine DAYTON components for maintenance and production needs across all regions.
How to install a DAYTON stamped steel pillow block bearing?
Mount the bearing on a clean, flat surface using 7/16 in bolts through the base slots. Align the shaft through the bore, tighten the set screws evenly against the shaft, and verify free rotation. Lubricate per manufacturer guidelines and check alignment to prevent premature wear at speeds up to 6,000 RPM.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton stamped steel pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
