Dayton Pillow Block Bearing: 5/8 in Bore, Steel, Set Screws, 1 5/16 in Shaft Ht
The DAYTON Stamped Steel Pillow Block Ball Bearing (SKU 3G-OTH-102790) is an inch-system bearing with a 5/8 in bore, designed for industrial equipment. It features a steel construction with set screws, a 1 5/16 in…
SKU 3G-OTH-102790
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The DAYTON Stamped Steel Pillow Block Ball Bearing (SKU 3G-OTH-102790) is an inch-system bearing with a 5/8 in bore, designed for industrial equipment. It features a steel construction with set screws, a 1 5/16 in shaft height, and a 4.437 in overall length. The bearing has a maximum speed of 5,000 RPM and uses a 7/16 in mounting bolt size.
Frequently Asked Questions
What is the DAYTON pillow block bearing used for?
The DAYTON stamped steel pillow block bearing supports rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its 5/8 in bore and set-screw locking collar secure the shaft, while the steel housing absorbs moderate loads and vibration in light-duty applications.
What are the specifications of the DAYTON pillow block bearing?
The DAYTON has a 5/8 in bore, steel construction with set screws, a 1 5/16 in shaft height, and a 4.437 in overall length. It is rated for a maximum speed of 5,000 RPM and uses a 7/16 in mounting bolt size. This inch-system bearing is designed for light-duty industrial applications.
Where to buy the DAYTON pillow block bearing worldwide?
3G Electric supplies the DAYTON pillow block bearing worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your site. Contact our team to place an order or request a quote for this bearing and other DAYTON components.
How to install the DAYTON pillow block bearing?
To install the DAYTON , first align the bearing housing on a flat mounting surface and secure it with 7/16 in bolts. Insert the shaft through the bore and tighten the set screws evenly against the shaft using a hex key. Ensure the shaft rotates freely and the bearing is properly lubricated before operation.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton stamped steel pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
