CBM Constant power heating cable/therm K10C3KIT (3m spool)

HEATING CABLES K10C...KIT ANTIFREEZE HEATING CABLE KIT WITH CONSTANT ANTIFREEZE POWER ■ Kit consisting of a heating cable complete with a contact thermostat and power cable with Schuko plug ■ Constant power delivered ~10 W/m ■ Avoid possible damage caused by low temperatures on pipes, valves, taps, water meters, water troughs, vessels and small tanks CODE Cable Minimum Maximum Maximum length installation room room temperature room temperature temperature powered not powered K10C3KIT 3m -5 °C 65 °C 65 °C K10C6KIT 6m -5 °C 65 °C 65 °C K10C9KIT 9m -5 °C 65 °C 65 °C K10C14KIT 14 m -5 °C 65 °C 65 °C HOMOLOGATION AND STANDARDS OPERATION ■ Compliant with Directive 2014/35/EU; ■ The cable is ready for use; ■ Complying with Standard EN60335-1; ■ The cable is actuated when the contact temperature drops below +5°C and automatically goes off when the temperature exceeds +15°C; ■ IT consists of a resistance wound in a spiral on two conductors and in contact with these at junction points at constant intervals (the energy to heat the resistance is drawn at the splicing points). 1 K10C...KIT - HEATING CABLE WITH CONSTANT ANTIFREEZE POWER ANTIFREEZE KIT INSTALLATION ■ The cable is ready for use: it has a Schuko plug to connect directly to the mains and a thermostat (+5°C to +15°C); ■ Thanks to the electric socket and the thermostat, installation is simple, safe and fast; ■ Secure the pipe with the relevant fixing tape: code K50 for steel pipes or code K50AL for plastic pipes; ■ The cable must be as long as the piping; ■ In the case of large pipes, the spiral cable may need to be wound so as to ensure adequate heat, taking care not to overlap it at any point; ■ It is advisable to apply an insulating coating over the heating cable for a correct installation. INSULATION THICKNESS Pipe size 1/2 3/4 1 1 1/4 1 1/2 Nominal width 15 20 25 32 40 mm Insulation thickness 20 20 20 30 40 mm ELECTRICAL FEATURES Power supply 230V-50Hz Constant power delivered ~10W/m GENERAL FEATURES Cable composition Thermoplastic material with a mechanical protection and earth braiding and an external protective sheath Cable diameter 9 mm Reel length K10C3KIT 3m K10C6KIT 6m K10C9KIT 9m K10C14KIT 14 m Maximum room temperature powered 65 ° C Minimum installation room temperature -5 °C Thermostat temperature scale ON +5°C / OFF +15°C Minimum storage room temperature -20 ÷ -25°C Protection rating IPX7 2  K10C...KIT - HEATING CABLE WITH CONSTANT ANTIFREEZE POWER ANTIFREEZE KIT ACCESSORIES K50 FIBERGLASS FIXING TAPE FOR METAL PIPES ■ It does not shrink and preserves its qualities over time; ■ Suitable for temperatures between -30 and + 150°C; ■ Roll length 55 m, width 19 mm. K50AL FIXING TAPE FOR PLASTIC PIPES ■ It reflects the heat as it is coated with an aluminium film; ■ Suitable for temperatures between -20 and + 130°C; ■ Roll length 50 m, width 50 mm. KFAN LABELS FOR THE PRESENCE OF A HEATING CABLE ■ Indicate the presence of the heating cable under the insulating coating; ■ To be applied on the coating at intervals of about 5 m; yellow. 3