CBM Cool Braze (replaces Hotblock)

SAFETY DATA SHEET COOL BRAZE® Heat absorption putty Section 1 - Product and Company Information Product name HMIS Codes Cool Braze® Health 0 Flammability 0 Product Codes Reactivity 0 83562 PPI B Chemical Family Organic/Inorganic Use Welding Aid/ Heat Sink Compound Manufactured For Manufactured By Emergency Telephone No. RectorSeal LLC SolderWeld Inc. Chemtrec 24 Hours 2601 Spenwick Drive 2050 N 300 W #72 (800) 424-9300 USA Houston, Texas 77055 USA Spanish Fork, UT 84660 (703) 527-3887 International Telephone: 1-800-356-8449 Within Australia +(61)-290372994 Date of validation July 19. 2022 Date of Preparation Technical Service Telephone No. July 19, 2022 (800) 231-3345 or (713) 263-8001 Section 2 - Hazards Identification Classification of the substance This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Hazards not otherwise classified (HNOC) Not applicable Label elements Hazardous ingredients Not Applicable Hazard statements (CLP) Not a hazardous substance or mixture according to the Globally Harmonized System (GHS) The product contains no substances which at their given concentration, are considered to be hazardous to health. Appearance Damp fibrous compound Physical state Paste / Gel Liquid Odor Odorless Page 1 of 10 R50226-1222  COOL BRAZE® Heat absorption putty Other information Not applicable Unknown acute toxicity 47 % of the mixture consists of ingredient(s) of unknown toxicity 47 % of the mixture consists of ingredient(s) of unknown acute oral toxicity 47 % of the mixture consists of ingredient(s) of unknown acute dermal toxicity 47 % of the mixture consists of ingredient(s) of unknown acute inhalation toxicity (gas) 47 % of the mixture consists of ingredient(s) of unknown acute inhalation toxicity (vapor) 47 % of the mixture consists of ingredient(s) of unknown acute inhalation toxicity (dust/mist) Section 3 - Hazards Identification Substance Not applicable. Mixture INGREDIENTS CAS NUMBER Weight-% Trade Secret Mica 12001-26-2 30-60 * Powdered Cellulose coarse 9004-34-6 10-30 * Titanium dioxide 13463-67-7 1-5 * *The exact percentage (concentration) of composition has been withheld as a trade secret. Section 4 - First aid measures Description of first aid measures Inhalation Remove to fresh air. Eye contact Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician. Skin contact Wash skin with soap and water. Ingestion Clean mouth with water and drink afterwards plenty of water. Most important symptoms and effects, both acute and delayed Symptoms Indication of any immediate medical attention and special treatment needed Note to physicians Treat symptomatically. Page 2 of 10 R50226-1222  COOL BRAZE® Heat absorption putty SECTION 5: Firefighting measures Extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Unsuitable extinguishing media CAUTION: Use of water spray when fighting fire may be inefficient. Specific hazards arising from the chemical Explosion data Sensitivity to mechanical impact. None. Sensitivity to static discharge None. Special protective equipment for fire-fighters Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment. SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures General measures: Personal precautions. Ensure adequate ventilation. Methods and material for containment and cleaning up Methods for containment. Prevent further leakage or spillage if safe to do so. Methods for cleaning up. Pick up and transfer to properly labeled containers. SECTION 7: Handling and storage Precautions for safe handling Precautions for safe handling: Advice on safe handling Handle in accordance with good industrial hygiene and safety practice. Conditions for safe storage, including any incompatibilities Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Page 3 of 10 R50226-1222  COOL BRAZE® Heat absorption putty SECTION 8: Exposure controls/personal protection Control parameters No Additional Information Exposure Limits Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH Mica TWA: 3 mg/m respirable 3 (vacated) TWA: 3 mg/m re- 3 IDHL: 1500 mg/m3 12001-26-2 particulate matter spirable dust <1% Crystalline TWA: 3 mg/m 3 containing silica <1% Quartz respirable dust TWA: 20 mppcf<1% Crystalline silica Powdered Cellulose coarse TWA: 10 mg/m 3 TWA: 15 mg/m 3 total dust TWA: 10 mg/m 3 total dust 9004-34-6 TWA: 6 mg/m respirable 3 TWA: 5 mg/m3 respirable fraction dust (Vacated) TWA: 15 mg/m3 total dust (vacated) TWA: 5 mg/m 3 respi- rable fraction (vacated) STEL: 10 mg/m 3 Titanium dioxide TWA: 10 mg/m 3 TWA: 15 mg/m 3 total dust IDHL: 5000 mg/m 3 13463-67-7 (vacated) TWA: 10 mg/m total 3 TWA: 2.4 mg/m 3 CIB 63 fine dust TWA: 0.3 mg/m 3 CIB 63 ultrafine, including engi- neered nanoscale Appropriate engineering controls Engineering controls Showers Eyewash stations Ventilation systems. Individual protection measures, such as personal protective equipment Eye/face protection No special protective equipment required. Skin and body protection No special protective equipment required. Respiratory protection No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required. General hygiene considerations Handle in accordance with good industrial hygiene and safety practi Page 4 of 10 R50226-1222  COOL BRAZE® Heat absorption putty SECTION 9: Physical and chemical properties Information on basic physical and chemical properties water Solubility: No data available Physical state: Damp Solubility in other solvents: No data available Appearance: Fibrous compound Color: Blue Partition coefficient: No data available Odor: None Autoignition temperature: No data available Odor Threshold: No data available Decomposition temperature: No data available pH:…