Topog-E Series CR/CP/CT/CDW Textiles – Ceramic Rope and Tapes, rated to 1800°F (1000°C).
Topog-E Series CR/CP/CT/CDW Textiles are Ceramic Rope and Tapes. Topog-E® Series CR (ceramic rope) and CP (ceramic packing) are produced from ceramic strands twisted around a high temperature fiberglass carrier which…
SKU 3G-OTH-02637
Also listed as: CRCPCTCDW · CR CP CT CDW
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
Topog-E Series CR/CP/CT/CDW Textiles are Ceramic Rope and Tapes. Topog-E® Series CR (ceramic rope) and CP (ceramic packing) are produced from ceramic strands twisted around a high temperature fiberglass carrier which are then braided into a round rope or square packing cross section.
Frequently Asked Questions
What is Topog-E Series CR/CP/CT/CDW ceramic rope and tape used for?
Topog-E Series CR/CP/CT/CDW ceramic rope and tape are high-temperature sealing materials used in industrial applications where heat and chemical attack are a concern. They are resilient up to 1800°F (1000°C) and resist most corrosive agents except hydrofluoric and phosphoric acids, making them suitable for furnaces, boilers, and kilns.
What are the specifications of Topog-E Series CR/CP/CT/CDW textiles?
Topog-E Series CR/CP/CT/CDW textiles are rated to 1800°F (1000°C). CR and CP are braided round rope or square packing from 1/4" to 1-1/2". CT and CDW tapes are available in widths from 1" to 8" and thicknesses of 1/16", 1/8", and 1/4". An optional stainless-steel wire carrier is available.
Where to buy Topog-E ceramic rope and tape in Singapore?
3G Electric supplies Topog-E Series CR/CP/CT/CDW ceramic rope and tape to Singapore. We source these high-temperature sealing textiles and handle logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on your required sizes and quantities.
How to install Topog-E ceramic tape for high-temperature sealing?
For installation, ensure the sealing surface is clean and dry. Cut the Topog-E tape to length using a sharp blade. For CT and CDW tapes, optional PSA backing simplifies adhesion. Avoid over-compression; the braided construction offers superior compression resistance. After exposure to steam or water, the material's properties fully recover upon drying.
Used in
Common applications for Topog-eTopog-e Products
3G Electric supplies Topog-e sealing rope & tape. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
