SCHNEIDER Front-Mounted IEC Delay Timer, LADT0
The SCHNEIDER ELECTRIC IEC Timer Module (MPN LADT0) is a front-mounted on-delay timer for the TeSys Deca series, offering a delay range of 0.3 sec to 3 sec with 1NO/1NC contacts. It has a maximum voltage rating of…
SKU 3G-OTH-40793
Also listed as: LADT 0 · LADT-0
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The SCHNEIDER ELECTRIC IEC Timer Module (MPN LADT0) is a front-mounted on-delay timer for the TeSys Deca series, offering a delay range of 0.3 sec to 3 sec with 1NO/1NC contacts. It has a maximum voltage rating of 690V AC.
Frequently Asked Questions
What is the SCHNEIDER ELECTRIC IEC Timer Module LADT0 used for?
The SCHNEIDER ELECTRIC IEC Timer Module LADT0 is used for on-delay timing in industrial motor control and automation circuits. It mounts on TeSys Deca contactors or starters to introduce a programmable delay (0.3 sec to 3 sec) before energizing the load, protecting equipment from inrush surges.
What are the specifications of the SCHNEIDER LADT0 timer module?
The SCHNEIDER LADT0 is a front-mounted IEC timer module with on-delay function, 0.3 sec to 3 sec range, and 1NO/1NC contacts. It has a maximum voltage rating of 690V AC and is compatible with the TeSys Deca series. The manufacturer part number is LADT0.
Where to buy SCHNEIDER LADT0 timer module worldwide?
You can source the SCHNEIDER LADT0 timer module worldwide through 3G Electric. As a global industrial equipment distributor since 1990, 3G Electric handles full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the SCHNEIDER LADT0 timer module on a TeSys Deca contactor?
To install the SCHNEIDER LADT0, clip it onto the front of a compatible TeSys Deca contactor or starter until it locks. Ensure the delay range (0.3 sec to 3 sec) is set via the adjustment dial. Follow standard electrical safety procedures and verify the 690V AC rating matches your circuit.
Used in
Common applications for SCHNEIDERSCHNEIDER Products
3G Electric supplies SCHNEIDER front-mounted iec delay timers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
