GATES PowerGrip GT2 Twin Power Dual-Sided Timing Belt
The GATES Timing Belt: Two Sides is a dual-sided GT section timing belt, specifically a PowerGrip® GT®2 Twin Power® belt with an 8 mm pitch and modified curvilinear tooth profile. Identified by Industry Number…
SKU 3G-OTH-116211
Also listed as: TP20008MGT20 · TP2000 8MGT 20
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The GATES Timing Belt: Two Sides is a dual-sided GT section timing belt, specifically a PowerGrip® GT®2 Twin Power® belt with an 8 mm pitch and modified curvilinear tooth profile. Identified by Industry Number TP2000-8MGT-20 and Manufacturer Part Number TP2000-8MGT-20, this belt is designed for synchronous power transmission applications requiring engagement on both sides.
Frequently Asked Questions
What is the GATES PowerGrip GT2 Twin Power timing belt used for?
This dual-sided timing belt is used for synchronous power transmission in applications requiring engagement on both sides, such as serpentine drives, reverse-bend idler systems, and multi-shaft layouts. It is common in industrial machinery, packaging equipment, and automation systems where space constraints or complex routing demand a belt that drives from both the inner and outer surfaces.
What are the specifications of the GATES TP2000-8MGT-20 timing belt?
The GATES TP2000-8MGT-20 is a PowerGrip GT2 Twin Power belt with an 8 mm pitch and modified curvilinear tooth profile. It has a dual-sided GT section, Industry Number TP2000-8MGT-20, and Manufacturer Part Number TP2000-8MGT-20. The belt is designed for synchronous power transmission with engagement on both sides.
Where to buy GATES timing belts worldwide?
You can source the GATES TP2000-8MGT-20 timing belt through 3G Electric, a global industrial equipment distributor established in 1990. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine GATES belts for industrial applications.
How to select the correct GATES dual-sided timing belt?
To select the correct GATES dual-sided timing belt, verify the pitch (8 mm), belt width (20 mm), and overall length (2000 mm) match your drive layout. Confirm the tooth profile is modified curvilinear (GT section) and that your application requires engagement on both sides. Consult GATES design manuals for power ratings and minimum pulley diameters to ensure proper selection.
Used in
Common applications for GATESGATES Products
3G Electric supplies GATES dual-sided gt section timing belts. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
