EXW Singapore — collect or forward from our Singapore office.

3G Electric
FIELD CONTROLS FC-150EC-ERV Residential Energy-Recovery Ventilator - Residential Energy-Recovery Ventilators
FIELD CONTROLSResidential Energy-Recovery Ventilators

FIELD CONTROLS FC-150EC-ERV Residential Energy-Recovery Ventilator

The FIELD CONTROLS Energy-Recovery Ventilator: Side Port (MPN FC-150EC-ERV) is a residential energy-recovery ventilator with a fixed plate core, delivering 145 cfm at 0.400 in SP and 84% max efficiency. It operates…

SKU 3G-OTH-76600

Also listed as: FC150ECERV · FC 150EC ERV

Brand
FIELD CONTROLS
Item
FC-150EC-ERV Residential Energy-Recovery Ventilator
Part Number
FC-150EC-ERV
Category
Residential Energy-Recovery Ventilators
Available to Order
Also known as:FC-150EC-ERVFIELD CONTROLS
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Required — additional freight charges may applyThis item requires special shipping, additional charges may apply.

Technical Specifications

FIELD CONTROLS
Manufacturer Part Number
FC-150EC-ERV
Type
145 cfm @ 0.400 in SP, Variable Speed
Catalog Page
N/A
Defrost Type
Exhaust Only
Port Location
Side
Max. Efficiency
84%
Ventilator Type
Energy-Recovery
Number of Speeds
Variable
Country of Origin
China (subject to change)
Full Load Current
1.2 A
Full Load Wattage
156 W
Nameplate Voltage
120V AC Nameplate Voltage This indicates the voltage rating inscribed on the nameplate. The voltage class (nominal voltage) required to operate the fan can vary slightly from this number.
Electrical Connection
Plug-In
Energy Recovery Wheel
Fixed Plate Core
Maximum Airflow @ 0.400 in SP
145 cfm
Maximum Heat Exchange Efficiency
84 % Maximum Heat Exchange Efficiency This is the maximum percentage of heat that the ventilator will retain from the outgoing air stream and transfer to the incoming air stream.

Technical Documents

(1)
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

FIELD CONTROLS Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The FIELD CONTROLS Energy-Recovery Ventilator: Side Port (MPN FC-150EC-ERV) is a residential energy-recovery ventilator with a fixed plate core, delivering 145 cfm at 0.400 in SP and 84% max efficiency. It operates on 120V AC with a plug-in electrical connection, features variable speed control, and uses an exhaust-only defrost type.

Frequently Asked Questions

What is the FIELD CONTROLS FC-150EC-ERV energy-recovery ventilator used for?

The FIELD CONTROLS FC-150EC-ERV is a residential energy-recovery ventilator that exchanges stale indoor air with fresh outdoor air while recovering heat and moisture. It is ideal for homes needing balanced ventilation with 84% max efficiency, 145 cfm at 0.400 in SP, and variable speed control.

What are the specifications of the FIELD CONTROLS FC-150EC-ERV?

The FC-150EC-ERV delivers 145 cfm at 0.400 in SP with 84% max efficiency. It operates on 120V AC, uses a plug-in electrical connection, features a fixed plate core, exhaust-only defrost, and variable speed control. The MPN is FC-150EC-ERV.

Where to buy the FIELD CONTROLS FC-150EC-ERV worldwide?

3G Electric supplies the FIELD CONTROLS FC-150EC-ERV to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. As a global industrial equipment distributor, we source and deliver this ERV to any location.

How to install the FIELD CONTROLS FC-150EC-ERV?

Install the FC-150EC-ERV per local codes and the manufacturer's manual. Mount the unit in a conditioned space, connect ductwork to the side ports, and plug into a 120V AC outlet. Set the variable speed control to desired airflow. Ensure proper sealing and drainage for the exhaust-only defrost cycle.

Used in

Common applications for FIELD CONTROLS
Oil-fired furnaces — Field Controls Power Venter pipe-mount draft inducer (SKU 45DX30) for 3 in to 4 in pipe, 115V AC, 1.7 A.
Natural gas furnaces — Field Controls Power Venter pipe-mount draft inducer (SKU 45DX25) for 4 in to 5 in pipe, 115V AC, 1.3 A.
LP-fueled furnaces — Field Controls Power Venter pipe-mount draft inducer (SKU 45DX27) for 5 in to 6 in pipe, 115V AC, 2.1 A.
Oil-fired boilers and water heaters — Field Controls DI-1 pipe-mount draft inducer (SKU 45DX35) with pressure sensing tube, 115V AC, 0.43 A.
Residential ventilation — Field Controls energy-recovery ventilator (FC-150EC-ERV) with fixed plate core, 145 cfm, 84% efficiency.
HVAC control systems — Field Controls FCMC fresh air ventilation control with SPDT switch, 24V AC, temperature sensing from -20°F to 150°F.
Not sure this is the right part? Photo-identify it→

FIELD CONTROLS Products

3G Electric supplies FIELD CONTROLS residential energy-recovery ventilators. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Unassembled axial downblast roof exhaust fan for industrial and commercial clean air applications. Features a 24-inch blade, square base, and supports airflow from 1,352 cfm to 5,320 cfm. Supplied without drive package; drive components must be sourced separately
Dayton
Unassembled axial downblast roof exhaust fan for industrial and commercial clean air applications. Features a 24-inch blade, square base, and supports airflow from 1,352 cfm to 5,320 cfm. Supplied without drive package; drive components must be sourced separately
Unassembled axial downblast roof exhaust fan for clean air in industrial and commercial settings. Features a 20-inch blade and square base, designed for roof mounting. Supports airflow from 960 cfm to 3,957 cfm. Supplied without drive package
Dayton
Unassembled axial downblast roof exhaust fan for clean air in industrial and commercial settings. Features a 20-inch blade and square base, designed for roof mounting. Supports airflow from 960 cfm to 3,957 cfm. Supplied without drive package
Unassembled clean air belt-drive fan for roof mounting. Square base, 36-inch blade, handles 2,580 to 10,406 cfm. Less drive package requires separate drive components. Suitable for industrial and commercial exhaust ventilation
Dayton
Unassembled clean air belt-drive fan for roof mounting. Square base, 36-inch blade, handles 2,580 to 10,406 cfm. Less drive package requires separate drive components. Suitable for industrial and commercial exhaust ventilation

More from FIELD CONTROLS

View all FIELD CONTROLS parts →

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first