We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
⌕
RFQ CartGet a QuoteSign inSign up
WILLIAMS COMFORT PRODUCTS logo

WILLIAMS COMFORT PRODUCTS

Williams Comfort Products is a manufacturer of gas-fired heating equipment based in the United States, with a product line focused on residential and light-commercial space heating. The company is known for its wall-mounted and floor-standing vented gas heaters, which are designed for permanent installation in buildings where natural gas or propane is available. The product families supplied by 3G Electric include vented surface-mount gas wall heaters, vented recessed gas wall heaters, and freestanding vented gas floor heaters (marketed as Hearth Heaters). These units are gravity-convection or fan-assisted, with heating capacities ranging from 35,000 BtuH to 55,000 BtuH input, and are available in both natural gas and propane configurations. Key technical features include Matchless Piezo manual ignition on many models, electronic ignition on higher-capacity units, and vent diameters of 3 or 4 inches. The heaters are constructed with solid-face cabinets and are intended for use with standard Type B venting systems. Williams Comfort Products does not publish IP ratings for these heaters, as they are not outdoor-rated; they are designed for indoor installation in conditioned spaces. 3G Electric stocks multiple SKUs of Williams heaters, including replacement parts such as vent caps, to support maintenance and retrofit projects. The product range is suitable for applications in workshops, garages, basements, and other areas requiring supplemental or primary heating where ducted systems are impractical. Engineers and procurement specialists should note that these heaters are not certified for use in mobile homes unless explicitly stated on the unit; all models listed are for site-built structures. The heaters comply with ANSI Z21.86/CSA 2.32 standards for vented gas-fired space heaters, as is standard for the category. 3G Electric provides logistics support for global shipment, ensuring that these US-manufactured heaters can be integrated into projects outside North America, provided local gas codes and venting regulations are observed.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 2 of 2
← Prev12Next →

About WILLIAMS COMFORT PRODUCTS

Williams Comfort Products is a manufacturer of gas-fired heating equipment based in the United States, with a product line focused on residential and light-commercial space heating. The company is known for its wall-mounted and floor-standing vented gas heaters, which are designed for permanent installation in buildings where natural gas or propane is available. The product families supplied by 3G Electric include vented surface-mount gas wall heaters, vented recessed gas wall heaters, and freestanding vented gas floor heaters (marketed as Hearth Heaters). These units are gravity-convection or fan-assisted, with heating capacities ranging from 35,000 BtuH to 55,000 BtuH input, and are available in both natural gas and propane configurations. Key technical features include Matchless Piezo manual ignition on many models, electronic ignition on higher-capacity units, and vent diameters of 3 or 4 inches. The heaters are constructed with solid-face cabinets and are intended for use with standard Type B venting systems. Williams Comfort Products does not publish IP ratings for these heaters, as they are not outdoor-rated; they are designed for indoor installation in conditioned spaces. 3G Electric stocks multiple SKUs of Williams heaters, including replacement parts such as vent caps, to support maintenance and retrofit projects. The product range is suitable for applications in workshops, garages, basements, and other areas requiring supplemental or primary heating where ducted systems are impractical. Engineers and procurement specialists should note that these heaters are not certified for use in mobile homes unless explicitly stated on the unit; all models listed are for site-built structures. The heaters comply with ANSI Z21.86/CSA 2.32 standards for vented gas-fired space heaters, as is standard for the category. 3G Electric provides logistics support for global shipment, ensuring that these US-manufactured heaters can be integrated into projects outside North America, provided local gas codes and venting regulations are observed.

Common Applications

  • Residential basement heating — Williams Comfort Products recessed-mount gas wall heater (MPN 3509622A) for supplemental warmth in finished basements.
  • Workshop or garage heating — Williams Comfort Products surface-mount gas wall heater (MPN 2203822) for spot heating in non-living spaces.
  • Commercial break room heating — Williams Comfort Products freestanding Hearth Heater (MPN 2001622A) for zone heating in small commercial areas.
  • Retrofit of older heating systems — Williams Comfort Products vent cap (MPN 9306) for replacing worn vent components on existing Williams heaters.
  • Light-industrial warehouse heating — Williams Comfort Products recessed-mount gas wall heater (MPN 5507332) for high-Btu heating in open-plan industrial spaces.
  • Propane-only site heating — Williams Comfort Products Hearth Heater (MPN 3501521A) for locations without natural gas infrastructure.

Frequently asked questions

Common questions about WILLIAMS COMFORT PRODUCTS from 3G Electric.

What fuel types are available for Williams Comfort Products heaters?

Williams Comfort Products heaters are available in two fuel configurations: natural gas and propane (LP). The specific fuel type is indicated in the model number and product specifications. For example, MPN 2203822 is a natural gas unit, while MPN 3501521A is propane. Ensure the heater is matched to the available gas supply and that local gas pressure requirements are met.

What ignition systems do Williams Comfort Products wall heaters use?

Williams Comfort Products wall heaters use either Matchless Piezo manual ignition or electronic/electric ignition, depending on the model. The Matchless Piezo system requires a manual push button to ignite the pilot, while electronic ignition models use a spark or hot-surface igniter controlled by a thermostat or switch. Refer to the specific SKU for ignition type.

Are Williams Comfort Products heaters vented or unvented?

All Williams Comfort Products heaters supplied by 3G Electric are vented. They require connection to a Type B vent system (or equivalent) to exhaust combustion gases outdoors. Models include surface-mount, recessed-mount, and freestanding floor heaters, all designed for vented operation. Unvented models are not part of this product line.

What is the heating capacity range of Williams Comfort Products heaters?

The heating capacity input for Williams Comfort Products heaters ranges from 35,000 BtuH to 55,000 BtuH, depending on the model. For example, the recessed-mount wall heater MPN 3509622A has a 35,000 BtuH input, while MPN 5507332 has a 55,000 BtuH input. Output capacity will vary based on efficiency and installation conditions.

Can Williams Comfort Products heaters be installed in mobile homes?

Williams Comfort Products heaters listed in this catalog are designed for site-built (stick-built) homes. They are not certified for installation in mobile homes or manufactured homes unless the unit is specifically marked for such use. Check the product label and local codes before installation in a mobile home.

What replacement parts are available for Williams Comfort Products heaters?

3G Electric stocks replacement parts for Williams Comfort Products heaters, including vent caps (e.g., MPN 9306) compatible with specific models such as 36FK26 and 36FK29. Other parts may include thermostats, ignition components, and cabinet panels. Contact 3G Electric for specific part availability.