We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
VOLTERREX logo

VOLTERREX

VOLTERREX is a manufacturer of portable and temporary lighting equipment, with a product line centered on balloon lights, tripod-mounted area lights, and rechargeable lanterns. The brand's catalog is built around LED emitters paired with diffuser-based optical designs, a configuration that spreads light across a work area rather than concentrating it in a single hotspot. This matters for buyers specifying lighting for construction sites, emergency response staging, industrial maintenance, and outdoor events, where glare reduction and even coverage affect both task visibility and worker safety.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 4 of 4
← Prev1234Next →

About VOLTERREX

VOLTERREX is a manufacturer of portable and temporary lighting equipment, with a product line centered on balloon lights, tripod-mounted area lights, and rechargeable lanterns. The brand's catalog is built around LED emitters paired with diffuser-based optical designs, a configuration that spreads light across a work area rather than concentrating it in a single hotspot. This matters for buyers specifying lighting for construction sites, emergency response staging, industrial maintenance, and outdoor events, where glare reduction and even coverage affect both task visibility and worker safety.

The product families break down into several groups. Corded tripod balloon lights are offered at multiple output levels, including 7,800 lm and 19,500 lm models, both operating on 110 to 240V AC with a maximum height of 6.5 ft. Higher-output balloon light fixtures reach up to 102,000 lm, carry an IP65 rating for dust and water resistance, and ship with a 25 ft power cord for temporary or permanent installation. Rechargeable lanterns cover the portable end of the range, with one model delivering 4,000 lm maximum brightness, a 40 ft beam, and 2.5 hr run time at maximum output, supplied with a carry bag. A separate group of 360-degree jobsite lights is supported by a range of accessories and replacement parts, including balloon diffusers, tripod stands with adjustable hand-crank masts, carry cases, and installation wrenches for C-clamp mounting hardware.

From a specification standpoint, the line is organized around a few recurring parameters: lumen output at maximum brightness, beam distance where applicable, run time for battery-powered units, operating voltage for corded fixtures, maximum mast height, cord length, and IP rating on sealed models. Accessories are keyed to specific manufacturer part numbers, so compatibility is determined by matching the accessory MPN to the fixture model it is listed against. For example, the STS-G2 tripod stand is specified for BL-60-G1 and BL-150-G1 fixtures, while the BLD-100-W-G1 balloon diffuser is a replacement component for VT-100W-10A-G1 and VT-100W-G1 360-degree jobsite lights.

3G Electric supplies the VOLTERREX line as part of its industrial equipment catalog, covering the lighting fixtures themselves along with the accessories and replacement parts needed to keep them in service. Buyers can review published specifications for each SKU, compare output levels and voltage requirements across models, and request a quote for the specific part numbers their application requires. Because the catalog includes both complete fixtures and individual replacement components, procurement can source a full lighting setup or a single diffuser, stand, or carry case without changing suppliers.

Common Applications

  • Construction sites — VOLTERREX corded tripod balloon lights at 7,800 lm or 19,500 lm for glare-reduced task and area lighting
  • Emergency response staging — VOLTERREX BL-700W-G2 balloon light fixture with IP65 rating and 25 ft cord for rapid area illumination
  • Industrial maintenance — VOLTERREX rechargeable lantern VT-48W-G1 for portable 4,000 lm inspection lighting in areas without power
  • Outdoor events — VOLTERREX 360-degree jobsite lights with BLD-100-W-G1 replacement diffusers to maintain even, low-glare coverage
  • Temporary work zones — VOLTERREX STS-G2 adjustable tripod stand with hand-crank mast for positioning BL-60-G1 or BL-150-G1 fixtures
  • Equipment transport and storage — VOLTERREX CB-LBL-BK-G1 carry case for protecting VT-LC-102K-G1 360-degree jobsite lights between jobs

Frequently asked questions

Common questions about VOLTERREX from 3G Electric.

What output levels are available in the VOLTERREX corded tripod balloon light range?

The corded tripod balloon light kits are listed at 7,800 lm and 19,500 lm maximum brightness. Both operate on 110 to 240V AC and extend to a maximum height of 6.5 ft. The diffused output is intended to reduce glare compared with bare LED fixtures, which is relevant for construction, emergency response, and industrial maintenance tasks where the light source may be within the worker's field of view. Higher-output area lighting is available separately in the balloon light fixture range, up to 102,000 lm.

What is the IP rating on the VOLTERREX BL-700W-G2 balloon light fixture?

The BL-700W-G2 balloon light fixture is rated IP65, meaning it is protected against dust ingress and against water projected from a nozzle. It delivers up to 102,000 lm maximum brightness and includes a 25 ft power cord. The IP65 rating and cord length make it suitable for temporary or permanent area lighting where the fixture may be exposed to dust, rain, or washdown conditions. Confirm the specific installation environment against the rating before specifying.

Which VOLTERREX fixtures is the STS-G2 tripod stand compatible with?

The STS-G2 adjustable tripod stand is specified for use with VOLTERREX BL-60-G1 and BL-150-G1 360-degree jobsite lights. It has a 6.5 ft adjustable hand-crank mast for height adjustment, which allows the light to be raised or lowered without removing the fixture. The stand provides a stable platform for positioning the light on uneven ground. When ordering, match the stand to the fixture model number to confirm compatibility, since accessory fitment in the VOLTERREX line is keyed to specific MPNs.

What run time does the VOLTERREX rechargeable lantern deliver at maximum brightness?

The rechargeable lantern, MPN VT-48W-G1, delivers 2.5 hours of run time at maximum brightness. Maximum output is 4,000 lm with a 40 ft beam. The unit ships with a carry bag for transport and storage. Run time at lower output settings will be longer, though published specifications list the figure at maximum brightness. For tasks requiring extended runtime at full output, plan for battery recharge cycles or specify a corded fixture instead.

Is the BLD-100-W-G1 balloon diffuser a complete light or a replacement part?

The BLD-100-W-G1 is a replacement balloon diffuser, not a complete light fixture. It is designed for VOLTERREX VT-100W-10A-G1 and VT-100W-G1 360-degree jobsite lights. The diffuser spreads light evenly to reduce glare and shadows in construction, maintenance, and industrial applications. Because it is a wear component, it can be ordered separately to restore the optical performance of an existing fixture without replacing the entire unit. Verify the fixture model number before ordering to confirm fitment.

What voltage do VOLTERREX corded balloon lights operate on?

The corded tripod balloon light kits are listed as operating on 110 to 240V AC. This dual-range input allows the same fixture to be used on common North American and international supply voltages without a step-down transformer. The BL-700W-G2 balloon light fixture also operates on 110 to 240V AC and includes a 25 ft power cord. For any corded fixture, confirm the available supply at the point of use and the required plug or connection type before specifying.