TRICO

The TRICO PE-1202 and PE-3003 series are both machine-mount, single-feed oil-dispensing lubrication systems. The primary difference is the maximum output volume per cycle. The PE-1202 series includes models with outputs of 6 cc, 12 cc, 36 cc, and 72 cc, while the PE-3003 series delivers up to 500 cc per cycle. All models use a 5/16" port size. Selection depends on the lubrication requirement of the specific point or system being served. The PE-1202 models are typically used for smaller, more frequent lubrication doses, while the PE-3003 is suited to applications requiring a larger volume per cycle.

TRICO constant-level oilers, such as the Latch Dog Oiler (MPN 31824), feature a 3/4" NPT mounting thread. This thread size is standard for many industrial lubrication points, allowing direct installation into bearing housings or machine frames. The oiler has a 4 oz glass reservoir, which allows visual inspection of the oil level. The vented design maintains atmospheric pressure inside the reservoir to ensure consistent oil flow. These oilers are intended for single-point lubrication and are not part of a centralized system. They are typically used on bearings and bushings where a constant oil level must be maintained.

The TRICO automatic lubrication pumps listed in the 3G Electric catalog—including the PE-1202 and PE-3003 series—are described as oil-dispensing systems. They are designed to deliver oil, not grease. Using grease in an oil pump can lead to clogging, excessive back pressure, or pump damage. For grease lubrication, a different pump type or a grease-specific lubricator would be required. Always verify the lubricant compatibility with the pump specifications before installation. If you need assistance selecting a pump for a specific lubricant, contact 3G Electric with the lubricant type and required output volume.

The TRICO fuse puller (MPN 38071) is an insulated hand tool designed for removing and installing fuses in electrical panels and equipment. It accommodates fuses from 1/4" to 1/2" in diameter and has a length of 5 inches. The insulation provides protection against accidental contact with live circuits during maintenance. This tool is typically used by electricians and maintenance technicians when changing fuses in industrial control panels, disconnect switches, and other electrical enclosures. It is a manual tool and does not require power. The insulated construction helps reduce the risk of short circuits or electrical shock while handling fuses.

Selection of a TRICO oil-dispensing pump depends on the required output volume per cycle, the number of lubrication points (feeds), and the port size. The pumps in the 3G Electric catalog are single-feed models with a 5/16" port. Output volumes range from 6 cc to 500 cc per cycle. To choose, determine the amount of oil needed per lubrication cycle for the specific bearing, chain, or slide. Consider the cycle frequency and the lubricant viscosity. The pump must be mounted securely on the machine. For assistance, provide the lubrication point details and required volume to 3G Electric, and we can help match a model from the PE-1202 or PE-3003 series.

Yes — 3G Electric (S) Pte. Ltd. supplies TRICO products. We stock the TRICO catalog and supply genuine factory-original products with full manufacturer warranty and technical support.