EXW Singapore — collect or forward from our Singapore office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

T&S BRASS

T&S Brass is a manufacturer of commercial plumbing and foodservice equipment, founded in 1947 and headquartered in Travelers Rest, South Carolina. The company produces faucets, fittings, pre-rinse assemblies, and replacement parts for commercial kitchens, laboratories, and industrial facilities. Its product line includes manual and sensor-operated faucets, pre-rinse units, bar sink faucets, foot and knee pedal valves, and a comprehensive range of repair components such as cartridges, spindles, hoses, and spray valves. T&S Brass products are specified where reliable water control and sanitation are required, including restaurant dishwashing stations, hospital scrub sinks, school cafeterias, and laboratory benches. Many assemblies carry certifications to ASME A112.18.1/CSA B125.1 and NSF/ANSI 61, and are constructed from brass with chrome or polished finishes for durability. Flow rates vary by model, from low-flow pre-rinse faucets at 1.42 gpm to bar faucets at 8.67 gpm, allowing selection based on application demand. Mounting configurations include single-post deck mount, wall mount, and concealed deck mount, with options for single or multiple holes. Replacement parts are organized by series, such as Eterna, Spring-Check, and B-0475 knee valve, to simplify identification. 3G Electric supplies T&S Brass components globally, offering access to over 130 SKUs that cover both complete faucet assemblies and the wear parts needed for maintenance. The catalog includes compression cartridges, pre-rinse hoses, spray valves, pedal valve cartridges, and gooseneck spouts. Each listing provides manufacturer part numbers, material specifications, flow rates, and compatibility details to support accurate selection. For plant engineers and maintenance managers, this means the ability to source genuine T&S Brass spares without minimum order complications, with technical data available to match existing installations. 3G Electric serves industrial, commercial, and institutional buyers who require documented specifications and consistent part quality. The T&S Brass line is part of a broader offering that includes burners, pumps, and gas controls, allowing consolidated procurement for facility maintenance. Whether replacing a worn cartridge in a high-use dishroom faucet or specifying a new pre-rinse station, the available T&S Brass products are supported by 3G Electric's global logistics and technical support.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 15 of 16

About T&S BRASS

T&S Brass is a manufacturer of commercial plumbing and foodservice equipment, founded in 1947 and headquartered in Travelers Rest, South Carolina. The company produces faucets, fittings, pre-rinse assemblies, and replacement parts for commercial kitchens, laboratories, and industrial facilities. Its product line includes manual and sensor-operated faucets, pre-rinse units, bar sink faucets, foot and knee pedal valves, and a comprehensive range of repair components such as cartridges, spindles, hoses, and spray valves. T&S Brass products are specified where reliable water control and sanitation are required, including restaurant dishwashing stations, hospital scrub sinks, school cafeterias, and laboratory benches. Many assemblies carry certifications to ASME A112.18.1/CSA B125.1 and NSF/ANSI 61, and are constructed from brass with chrome or polished finishes for durability. Flow rates vary by model, from low-flow pre-rinse faucets at 1.42 gpm to bar faucets at 8.67 gpm, allowing selection based on application demand. Mounting configurations include single-post deck mount, wall mount, and concealed deck mount, with options for single or multiple holes. Replacement parts are organized by series, such as Eterna, Spring-Check, and B-0475 knee valve, to simplify identification. 3G Electric supplies T&S Brass components globally, offering access to over 130 SKUs that cover both complete faucet assemblies and the wear parts needed for maintenance. The catalog includes compression cartridges, pre-rinse hoses, spray valves, pedal valve cartridges, and gooseneck spouts. Each listing provides manufacturer part numbers, material specifications, flow rates, and compatibility details to support accurate selection. For plant engineers and maintenance managers, this means the ability to source genuine T&S Brass spares without minimum order complications, with technical data available to match existing installations. 3G Electric serves industrial, commercial, and institutional buyers who require documented specifications and consistent part quality. The T&S Brass line is part of a broader offering that includes burners, pumps, and gas controls, allowing consolidated procurement for facility maintenance. Whether replacing a worn cartridge in a high-use dishroom faucet or specifying a new pre-rinse station, the available T&S Brass products are supported by 3G Electric's global logistics and technical support.

Common Applications

  • Commercial kitchens — T&S Brass pre-rinse faucets (e.g., SKU 5WMX7) for dishwashing stations
  • Bar and beverage service — T&S Brass gooseneck bar sink faucets (e.g., B-0300) for filling glassware
  • Healthcare facilities — T&S Brass foot pedal and knee pedal valves for hands-free scrub sinks
  • Food processing plants — T&S Brass compression cartridges (e.g., Eterna series) for washdown stations
  • Laboratories — T&S Brass single-post deck-mounted faucets for chemical-resistant water control
  • Institutional cafeterias — T&S Brass sprayer hoses (e.g., B-0044-V9) for pot and pan rinsing

Guides & Resources

Frequently asked questions

Common questions about T&S BRASS from 3G Electric.

What is the difference between the T&S Brass Eterna and Spring-Check cartridge series?

The Eterna series uses a compression mechanism with a removable insert and spindle, while the Spring-Check series incorporates a spring-loaded check seat washer to prevent cross-flow. Both are brass cartridges for hot or cold water service. Eterna cartridges are often found in older T&S faucets and are identified by their bonnet and spindle assembly. Spring-Check cartridges include additional seals and gaskets. When replacing, verify the series marked on the existing faucet or consult the part number. 3G Electric stocks both types, including SKU 5NRG0 for Spring-Check and SKU 4KRA4 for Eterna spindle assemblies.

What flow rate does the T&S Brass B-0300 bar sink faucet have?

The T&S Brass B-0300 single-post bar sink faucet delivers a flow rate of 8.67 gpm. It is constructed of brass and mounts on a deck with one hole. The gooseneck spout provides clearance for filling large containers. This model is typically used in commercial bar and foodservice sink applications where higher flow is needed. For lower-flow bar faucets, the B-0305 model is rated at 5.59 gpm. Both are available through 3G Electric with manufacturer part numbers and specifications.

Are T&S Brass pre-rinse faucets compatible with standard mounting holes?

T&S Brass pre-rinse faucets, such as the single-post deck-mounted model with spray spring hose (SKU 5WMX7), require one mounting hole. The faucet is constructed of brass with a chrome finish and has a flow rate of 1.42 gpm. It includes a wall bracket for stability. Installation typically requires a 1-1/4 inch diameter hole, but always verify the specific model's cutout dimensions. These faucets are designed for commercial kitchen pre-rinse stations and connect to standard plumbing lines. 3G Electric provides the mounting hole requirement in each product listing.

What replacement parts are available for T&S Brass foot pedal and knee pedal valves?

Replacement parts for T&S Brass foot pedal and knee pedal systems include brass cartridges with bonnets. For example, SKU 4XKP3 is a cartridge with one bonnet for general pedal valve maintenance, while SKU 10C453 is specifically for the bonnet assembly of the B-0475 Knee Valve Series. These parts are used to restore hands-free water flow control. They are genuine T&S Brass components identified by manufacturer part numbers. 3G Electric stocks these and other pedal valve spares to support facility maintenance programs.

What is the length and connection type of the T&S Brass B-0044-V9 pre-rinse hose?

The T&S Brass B-0044-V9 pre-rinse hose is 44 inches long and has a 3/4-inch UN sprayer connection. It is made of stainless steel and includes hose washers and a vacuum breaker. This hose is used in commercial kitchens to connect spray valves to faucets for rinsing dishes and utensils. It meets ASME A112.18.1/CSA B125.1 standards. The stainless steel construction resists corrosion and wear. 3G Electric lists this hose with its overall length, connection type, and included components for accurate replacement.

Does 3G Electric supply T&S BRASS products?

Yes — 3G Electric (S) Pte. Ltd. supplies T&S BRASS products. We stock the T&S BRASS catalog and supply genuine factory-original products with full manufacturer warranty and technical support.