We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
SPACEPAK logo

SPACEPAK

SPACEPAK is a manufacturer of HVAC components for forced-air and hydronic systems, with a product line that includes plenum fittings, take-off kits, flexible duct, and hydronic duct coils. The brand's components are used in residential and light commercial air distribution, where they connect main plenums to branch ducts, route airflow, and transfer heat between water and air. SPACEPAK products are specified by part number and physical dimensions, allowing engineers and contractors to match components to existing ductwork and equipment. 3G Electric supplies SPACEPAK parts globally, supporting procurement and maintenance teams with access to plenum elbows, connectors, take-off kits, hydronic coils, and flexible duct in various sizes. The SPACEPAK catalog includes plenum accessories such as the SPS-45-4 plenum elbow, which routes airflow at a 45-degree angle to reduce turbulence, and the SPC-38-10 connector for joining flexible duct runs to plenums or distribution boxes. Take-off kits like the AC-TKMR-5 extract air from main plenums for zone distribution. Hydronic duct coils, including the AC-WPAK-60, AC-WPAK-90, and AC-WPAK-120, are available in casing sizes from 14 in x 24 in x 10-1/2 in to 14 in x 43 in x 10-1/2 in, with flow capacities ranging from 0.083 gpm to 5 gpm. These coils are designed for hot water or chilled water applications in ducted HVAC systems. Flexible duct options include non-insulated and insulated constructions, such as the SPC-4 non-insulated duct (15-inch diameter, 10-foot length) and the AC-ST6-100 insulated duct (2-inch diameter, 100-foot length, aluminum construction). SPACEPAK components are typically selected based on duct size, airflow requirements, and installation constraints. The plenum fittings and take-off kits are used to modify or extend existing air distribution systems, while the hydronic coils integrate with boilers, chillers, or water-source heat pumps. 3G Electric maintains inventory and provides logistics support for SPACEPAK parts, enabling plant engineers, maintenance managers, and procurement specialists to source replacement components and new installations. The product range covers common sizes and configurations, but custom or less-common sizes may be available through 3G Electric's supplier network. For technical selection, buyers should refer to the manufacturer part number and specifications such as casing dimensions, flow capacity, and duct diameter. 3G Electric's catalog includes SPACEPAK SKUs with detailed specs to facilitate accurate ordering. The brand's focus on standardized fittings and coils supports retrofit and new construction projects in residential, commercial, and light industrial settings. SPACEPAK does not publish extensive marketing materials, so 3G Electric relies on manufacturer data and product specifications to assist customers. When specifying SPACEPAK components, consider compatibility with existing ductwork, available space, and the required airflow or heating/cooling capacity. 3G Electric can provide quotes and lead times for SPACEPAK parts, with shipping to international destinations. The product line is not limited to any single region; 3G Electric serves a global customer base. For maintenance and repair, SPACEPAK plenum fittings and flexible duct are often stocked as consumables, while hydronic coils are selected for specific capacity needs. The brand's part numbering system, such as AC-WPAK-60 and SPS-45-4, indicates model variations and sizes. 3G Electric's team can cross-reference SPACEPAK part numbers with legacy or alternative components when direct replacements are unavailable. Overall, SPACEPAK provides a range of HVAC air distribution and hydronic components that 3G Electric distributes with a focus on specification accuracy and logistics.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 1 of 3
← Prev123Next →

About SPACEPAK

SPACEPAK is a manufacturer of HVAC components for forced-air and hydronic systems, with a product line that includes plenum fittings, take-off kits, flexible duct, and hydronic duct coils. The brand's components are used in residential and light commercial air distribution, where they connect main plenums to branch ducts, route airflow, and transfer heat between water and air. SPACEPAK products are specified by part number and physical dimensions, allowing engineers and contractors to match components to existing ductwork and equipment. 3G Electric supplies SPACEPAK parts globally, supporting procurement and maintenance teams with access to plenum elbows, connectors, take-off kits, hydronic coils, and flexible duct in various sizes. The SPACEPAK catalog includes plenum accessories such as the SPS-45-4 plenum elbow, which routes airflow at a 45-degree angle to reduce turbulence, and the SPC-38-10 connector for joining flexible duct runs to plenums or distribution boxes. Take-off kits like the AC-TKMR-5 extract air from main plenums for zone distribution. Hydronic duct coils, including the AC-WPAK-60, AC-WPAK-90, and AC-WPAK-120, are available in casing sizes from 14 in x 24 in x 10-1/2 in to 14 in x 43 in x 10-1/2 in, with flow capacities ranging from 0.083 gpm to 5 gpm. These coils are designed for hot water or chilled water applications in ducted HVAC systems. Flexible duct options include non-insulated and insulated constructions, such as the SPC-4 non-insulated duct (15-inch diameter, 10-foot length) and the AC-ST6-100 insulated duct (2-inch diameter, 100-foot length, aluminum construction). SPACEPAK components are typically selected based on duct size, airflow requirements, and installation constraints. The plenum fittings and take-off kits are used to modify or extend existing air distribution systems, while the hydronic coils integrate with boilers, chillers, or water-source heat pumps. 3G Electric maintains inventory and provides logistics support for SPACEPAK parts, enabling plant engineers, maintenance managers, and procurement specialists to source replacement components and new installations. The product range covers common sizes and configurations, but custom or less-common sizes may be available through 3G Electric's supplier network. For technical selection, buyers should refer to the manufacturer part number and specifications such as casing dimensions, flow capacity, and duct diameter. 3G Electric's catalog includes SPACEPAK SKUs with detailed specs to facilitate accurate ordering. The brand's focus on standardized fittings and coils supports retrofit and new construction projects in residential, commercial, and light industrial settings. SPACEPAK does not publish extensive marketing materials, so 3G Electric relies on manufacturer data and product specifications to assist customers. When specifying SPACEPAK components, consider compatibility with existing ductwork, available space, and the required airflow or heating/cooling capacity. 3G Electric can provide quotes and lead times for SPACEPAK parts, with shipping to international destinations. The product line is not limited to any single region; 3G Electric serves a global customer base. For maintenance and repair, SPACEPAK plenum fittings and flexible duct are often stocked as consumables, while hydronic coils are selected for specific capacity needs. The brand's part numbering system, such as AC-WPAK-60 and SPS-45-4, indicates model variations and sizes. 3G Electric's team can cross-reference SPACEPAK part numbers with legacy or alternative components when direct replacements are unavailable. Overall, SPACEPAK provides a range of HVAC air distribution and hydronic components that 3G Electric distributes with a focus on specification accuracy and logistics.

Common Applications

  • Residential forced-air HVAC — SPACEPAK SPS-45-4 plenum elbow for routing airflow at 45 degrees in plenum systems
  • Light commercial ducted heating — SPACEPAK AC-WPAK-60 hydronic coil for hot water heating in 14x24 inch duct
  • Zone control in residential buildings — SPACEPAK AC-TKMR-5 plenum take-off kit for branch duct connections
  • Retrofit air distribution — SPACEPAK SPC-4 non-insulated flexible duct for low-pressure systems, 15-inch diameter
  • Confined space ducting — SPACEPAK AC-ST6-100 insulated flexible duct, 2-inch diameter, 100-foot length
  • Hydronic cooling in light commercial — SPACEPAK AC-WPAK-120 coil for chilled water applications in 14x43 inch duct

Frequently asked questions

Common questions about SPACEPAK from 3G Electric.

What sizes of SPACEPAK hydronic duct coils are available?

SPACEPAK hydronic duct coils are available in several casing sizes, including 14 in x 24 in x 10-1/2 in (AC-WPAK-60), 14 in x 33 in x 10-1/2 in (AC-WPAK-90), and 14 in x 43 in x 10-1/2 in (AC-WPAK-120). Flow capacities range from 0.083 gpm to 5 gpm. These coils are designed for hot water or chilled water applications in ducted HVAC systems. When selecting a coil, match the casing dimensions to the available duct space and verify the flow rate meets the heating or cooling load. 3G Electric lists each coil by manufacturer part number and specifications to aid selection.

What is the SPACEPAK SPS-45-4 plenum elbow used for?

The SPACEPAK SPS-45-4 is a plenum elbow accessory that routes airflow at a 45-degree angle in HVAC plenum systems. It connects ductwork sections where a directional change is needed, helping to reduce turbulence compared to sharper turns. This fitting is typically used in forced-air systems to direct air from a main plenum to branch ducts. It is a non-powered component and must be sized to match the connected duct dimensions. 3G Electric supplies the SPS-45-4 as a standalone part for retrofit or new installation.

Can SPACEPAK flexible duct be used in high-pressure HVAC systems?

SPACEPAK flexible duct, such as the SPC-4 non-insulated duct and AC-ST6-100 insulated duct, is designed for low-pressure HVAC systems. These ducts are suitable for residential and light commercial air distribution where static pressure is typically below 2 inches water column. For high-pressure applications, alternative duct types or additional support may be required. Always verify the pressure rating and installation guidelines for the specific SPACEPAK duct model. 3G Electric provides product specifications to help determine suitability.

What is included in a SPACEPAK plenum take-off kit?

A SPACEPAK plenum take-off kit, such as the AC-TKMR-5, includes components to connect branch ductwork to a main plenum in forced-air HVAC systems. The kit typically contains a take-off collar or fitting and may include mounting hardware. It is used to extract air from the plenum for distribution to individual rooms or zones. The exact contents can vary by kit; refer to the manufacturer part number and description. 3G Electric lists the AC-TKMR-5 as a plenum take-off kit for SPACEPAK systems.

How do I select the right SPACEPAK hydronic coil for my application?

To select a SPACEPAK hydronic coil, determine the required heating or cooling capacity, available duct dimensions, and water flow rate. Measure the duct height, width, and depth to match the coil casing size, such as 14 in x 24 in, 14 in x 33 in, or 14 in x 43 in. Verify the flow capacity (e.g., 5 gpm for AC-WPAK-60 and AC-WPAK-90, 0.083 gpm for AC-WPAK-120) aligns with your system's pump and piping. Consider the entering water temperature and air velocity. 3G Electric can provide specification sheets for each SPACEPAK coil model.

Are SPACEPAK plenum connectors compatible with all flexible duct brands?

SPACEPAK plenum connectors, such as the SPC-38-10, are designed to connect flexible duct runs to a main plenum or air distribution box. Compatibility depends on the duct diameter and connection method. The SPC-38-10 is a connector accessory; it is typically sized to fit standard flexible duct sizes. While SPACEPAK connectors are intended for use with SPACEPAK systems, they may work with other brands if dimensions match. Always verify the connector's inner and outer diameters against your duct. 3G Electric provides dimensional data for SPACEPAK connectors.