RHEEM

Rheem heat pump water heaters in the 3G Electric catalog include models with 40-, 65-, and 80-gallon tank capacities. They operate on single-phase 208–240 V AC power and are available with either 2,750 W or 5,000 W heating elements. Maximum recovery flow rates are 16 or 27 gallons per hour at a 90°F temperature rise. Unit heights range from 78.9 inches (40-gallon) to 91 inches (80-gallon). These units combine an integrated heat pump with electric resistance heating for hot water generation. Specific model numbers include PROPH40 T2 RH400-15, PROPH65 T2 RH400-30, and PROPH80 T2 RH400-15, among others.

3G Electric supplies Rheem immersion heating elements including the SP10698PH, a 5,500 W element for electric water heaters, and the SP10869HL, a 2,500 W low-watt-density (LWD) element. The LWD element has a stainless steel sheath, threaded pipe connection, and 9.96-inch insert length, rated for 208/240 V AC at 60 Hz. It is compatible with manufacturer part number XG29T12XR60U0. These elements are used in commercial and residential plumbing systems for hot water supply. Some elements may be restricted for international sale; 3G Electric can verify export eligibility for specific part numbers.

Rheem water heater elements are designed for Rheem water heaters. Compatibility with other brands depends on the specific element specifications, including thread type, wattage, voltage, and insert length. The SP10869HL LWD element lists a compatible manufacturer part number (XG29T12XR60U0), which may cross-reference to other applications. For replacement purposes, always verify the element's physical dimensions, electrical ratings, and connection type against the original equipment. 3G Electric can provide dimensional and electrical specifications to assist with cross-referencing, but final verification of fit and function remains the responsibility of the installing technician.

The Rheem PROPH65 T2 RH400-30 and PROPH65 T2 RH400-15 are both 65-gallon heat pump water heaters operating on single-phase 208–240 V AC. The primary difference is the heating element wattage and recovery rate. The RH400-30 has a 5,000 W element and a maximum recovery flow rate of 27 gallons per hour at a 90°F temperature rise. The RH400-15 has a 2,750 W element and a recovery rate of 16 gallons per hour at the same temperature rise. Both units stand 81.1 inches tall. Selection depends on required hot water demand and electrical circuit capacity.

3G Electric distributes industrial equipment globally. However, some Rheem items are restricted for international sale, as noted in product listings. For example, the SP10698PH immersion heating element is marked as restricted for international sale. 3G Electric can confirm export eligibility for specific Rheem part numbers and provide documentation as required. Shipping destinations and regulatory compliance are evaluated on a per-order basis. Contact 3G Electric with the target part number and destination country for a definitive answer on international availability.

Rheem heat pump water heaters listed by 3G Electric operate on single-phase 208–240 V AC at 60 Hz. This voltage range is common in North American commercial and residential electrical systems. Installation requires a dedicated circuit sized for the unit's amperage draw, which varies by model and heating element wattage. The heat pump compressor and electric resistance elements are powered from the same supply. Always consult the installation manual and local electrical codes for circuit sizing, overcurrent protection, and disconnect requirements. 3G Electric can provide nameplate data for specific models to assist with electrical planning.