EXW Singapore — collect or forward from our Singapore office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

RANGER LOCK

Ranger Lock is a manufacturer of physical security hardware for vehicles, trailers, and fixed equipment. The product line centers on two families: receiver locks that secure trailer hitch receivers against unauthorized removal, and steel padlock guards that enclose standard and long shackle padlocks to resist cutting, prying, and weather exposure. Receiver lock assemblies ship with a mounting bracket, securing rod, and self-tapping screws, and are intended for trucks and similar towing platforms where the hitch receiver is exposed to theft or tampering. Padlock guards are formed from steel and are sized to fit specific padlock bodies and hasp arrangements; catalog dimensions in this line range from 2-3/4 in by 2-1/4 in up to 5 in by 6-1/2 in, with intermediate sizes at 3 in by 1-11/16 in, 4 in by 4-1/2 in, and 5-1/4 in by 2-1/2 in. A dedicated guard variant is configured for cargo van doors, where it reinforces the factory latch to resist forced entry on fleet vehicles, service vans, and delivery trucks. The guards are specified for gates, lockers, machinery enclosures, and similar equipment where a padlock is the primary locking element and the shackle would otherwise be exposed. Because the guards accept both standard and long shackle padlocks, they can be applied without changing the existing padlock standard in a facility. 3G Electric supplies the Ranger Lock line as part of its industrial equipment catalog, covering 29 SKUs across standard, long shackle, and covered guard configurations plus receiver lock assemblies. Buyers specifying from this line typically work from three variables: the padlock body and shackle dimensions the guard must clear, the mounting surface and hardware available at the point of use, and the exposure conditions the guard will see. Guard length and width are published per SKU, and the receiver lock includes its own mounting hardware, so installation planning can be done from the catalog data without field fabrication. For maintenance and procurement teams, the practical value of the line is that it addresses two recurring loss points — trailer receiver theft and padlock shackle attack — with bolt-on or bracket-mounted hardware rather than modifications to the primary structure. 3G Electric supports the line with SKU-level specification data, cross-referencing by manufacturer part number, and quotation for single units or multi-site rollouts. Part numbers in the supplied range include RDIN-00 for the receiver lock, and RGST-00, RGET-00, RGCJ-00, RGEX-00, RGCU-00, RGRU-00, and RGSE-00 for the padlock guard variants. Where a facility standardizes on a particular padlock, the guard selection should be matched to that padlock's shackle diameter and body width; where the padlock is not yet fixed, the guard can be selected first and the padlock chosen to fit. The receiver lock is a single-configuration item and is specified by vehicle receiver class and pin hole geometry at the point of purchase.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 1 of 4
← Prev1234Next →

About RANGER LOCK

Ranger Lock is a manufacturer of physical security hardware for vehicles, trailers, and fixed equipment. The product line centers on two families: receiver locks that secure trailer hitch receivers against unauthorized removal, and steel padlock guards that enclose standard and long shackle padlocks to resist cutting, prying, and weather exposure. Receiver lock assemblies ship with a mounting bracket, securing rod, and self-tapping screws, and are intended for trucks and similar towing platforms where the hitch receiver is exposed to theft or tampering. Padlock guards are formed from steel and are sized to fit specific padlock bodies and hasp arrangements; catalog dimensions in this line range from 2-3/4 in by 2-1/4 in up to 5 in by 6-1/2 in, with intermediate sizes at 3 in by 1-11/16 in, 4 in by 4-1/2 in, and 5-1/4 in by 2-1/2 in. A dedicated guard variant is configured for cargo van doors, where it reinforces the factory latch to resist forced entry on fleet vehicles, service vans, and delivery trucks. The guards are specified for gates, lockers, machinery enclosures, and similar equipment where a padlock is the primary locking element and the shackle would otherwise be exposed. Because the guards accept both standard and long shackle padlocks, they can be applied without changing the existing padlock standard in a facility. 3G Electric supplies the Ranger Lock line as part of its industrial equipment catalog, covering 29 SKUs across standard, long shackle, and covered guard configurations plus receiver lock assemblies. Buyers specifying from this line typically work from three variables: the padlock body and shackle dimensions the guard must clear, the mounting surface and hardware available at the point of use, and the exposure conditions the guard will see. Guard length and width are published per SKU, and the receiver lock includes its own mounting hardware, so installation planning can be done from the catalog data without field fabrication. For maintenance and procurement teams, the practical value of the line is that it addresses two recurring loss points — trailer receiver theft and padlock shackle attack — with bolt-on or bracket-mounted hardware rather than modifications to the primary structure. 3G Electric supports the line with SKU-level specification data, cross-referencing by manufacturer part number, and quotation for single units or multi-site rollouts. Part numbers in the supplied range include RDIN-00 for the receiver lock, and RGST-00, RGET-00, RGCJ-00, RGEX-00, RGCU-00, RGRU-00, and RGSE-00 for the padlock guard variants. Where a facility standardizes on a particular padlock, the guard selection should be matched to that padlock's shackle diameter and body width; where the padlock is not yet fixed, the guard can be selected first and the padlock chosen to fit. The receiver lock is a single-configuration item and is specified by vehicle receiver class and pin hole geometry at the point of purchase.

Common Applications

  • Fleet and towing operations — Ranger Lock receiver lock (RDIN-00) secures the trailer hitch receiver against unauthorized removal between jobs.
  • Cargo and delivery fleets — Ranger Lock van door guard (RGRU-00) reinforces the factory latch on cargo van doors to resist forced entry.
  • Perimeter and gate security — Ranger Lock steel padlock guards (RGST-00, RGCU-00) enclose padlocks on gates exposed to cutting and weather.
  • Locker and storage rooms — Ranger Lock padlock guards (RGCJ-00) fit standard and long shackle padlocks on lockers and storage cabinets.
  • Machinery and equipment enclosures — Ranger Lock padlock guards (RGEX-00) protect padlocks on enclosures where the shackle would otherwise be exposed.
  • Large hasp and utility applications — Ranger Lock padlock guards (RGSE-00, RGET-00) cover larger padlock and hasp arrangements on outdoor equipment.

Frequently asked questions

Common questions about RANGER LOCK from 3G Electric.

What does the Ranger Lock receiver lock include, and what is it used for?

The Ranger Lock receiver lock (MPN RDIN-00) secures a trailer hitch receiver to prevent unauthorized removal of the drawbar or accessory mounted in it. The assembly includes a mounting bracket, a securing rod, and self-tapping screws for installation. It is intended for trucks and similar towing platforms where the receiver is left in place between uses. Because the mounting hardware is supplied, installation does not require sourcing separate fasteners. Confirm the receiver pin hole diameter and bracket mounting surface on the vehicle before ordering, as the lock is a single-configuration item.

How do I choose the correct Ranger Lock padlock guard size?

Guard selection is driven by the padlock body and shackle dimensions and by the hasp or mounting point the guard must cover. Ranger Lock publishes guard length and width per SKU: for example, RGST-00 and RGCU-00 are 2-3/4 in by 2-1/4 in, RGCJ-00 is 3 in by 1-11/16 in, RGEX-00 is 4 in by 4-1/2 in, RGET-00 is 5-1/4 in by 2-1/2 in, and RGSE-00 is 5 in by 6-1/2 in. Match the guard opening to the padlock you standardize on, and confirm the guard will clear the hasp. All listed guards accept both standard and long shackle padlocks.

Do Ranger Lock padlock guards fit both standard and long shackle padlocks?

Yes. The Ranger Lock padlock guard line is specified for both standard and long shackle padlocks, so a facility does not need to change its padlock standard to add guards. The guard encloses the padlock body and shackle to resist cutting, prying, and weather exposure. Because long shackle padlocks present more exposed shackle, the guard depth and opening dimensions matter more in those applications; check the published guard length and width against the padlock you intend to use. Guards are used on gates, lockers, machinery enclosures, and similar equipment where the padlock is the primary locking element.

Is there a Ranger Lock guard for cargo van doors?

Yes. The Ranger Lock guard with MPN RGRU-00 is configured for cargo van doors. It is designed to reinforce the factory latch to help prevent forced entry, and is specified for fleet vehicles, service vans, and delivery trucks. This is a distinct application from the general-purpose padlock guards in the line, which are sized for gates, lockers, and equipment enclosures. If you are specifying for a mixed fleet, confirm the door latch geometry on each vehicle type, since the guard is matched to the factory latch rather than to a padlock body dimension.

What materials and exposure conditions are Ranger Lock padlock guards rated for?

The Ranger Lock padlock guards in this line are steel. They are specified to protect padlocks from physical attack, weather, and debris, which makes them suitable for outdoor gates, exposed lockers, and equipment enclosures. The catalog does not publish a coating or finish specification per SKU, so for highly corrosive environments — coastal, chemical, or wash-down areas — confirm the finish requirement with 3G Electric before ordering. Guard dimensions are published per part number, and the guards accept standard and long shackle padlocks.

How many Ranger Lock SKUs does 3G Electric supply, and how are they identified?

3G Electric supplies 29 Ranger Lock SKUs, covering standard, long shackle, and covered padlock guard configurations plus receiver lock assemblies. Items are identified by manufacturer part number, for example RDIN-00 for the receiver lock and RGST-00, RGET-00, RGCJ-00, RGEX-00, RGCU-00, RGRU-00, and RGSE-00 for guard variants. Because several guards share the same product type name, ordering by MPN rather than by description avoids mismatches on guard length and width. 3G Electric can quote single units or multi-site requirements and cross-reference by part number.