Pneumatics

Tech Support

Quote Response

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Page 370 of 472

BrandINGERSOLL RAND

BrandSPEEDAIRE

BrandBOSTITCH

BrandCONRADER

BrandDYNABRADE

BrandVIAIR CORPORATION

BrandNEX FLOW

BrandBOSTITCH

BrandINGERSOLL RAND

BrandDYNABRADE

BrandINGERSOLL RAND

BrandDEVILBISS

BrandSOLBERG

BrandSCHMALZ

BrandCHICAGO PNEUMATIC

BrandCHICAGO PNEUMATIC

BrandINGERSOLL RAND

BrandDYNABRADE

BrandSPEEDAIRE

BrandBOSTITCH

BrandNUMATICS

BrandSPEEDAIRE

BrandCHICAGO PNEUMATIC

BrandSPEEDAIRE

BrandBOSTITCH

BrandCHICAGO PNEUMATIC

BrandRENEWABLE LUBRICANTS

BrandSCHMALZ

BrandWILKERSON

BrandDYNABRADE

BrandWILKERSON

BrandCHICAGO PNEUMATIC

BrandCHICAGO PNEUMATIC

BrandEXCELTA

BrandCONTROL DEVICES

BrandBOSTITCH

Pneumatics

INGERSOLL RAND Air Angle Grinder: 5 in Wheel Dia, 0.9 hp Horsepower

SPEEDAIRE Valve Stem: For 3CRJ3

BOSTITCH O-Ring: Mfr Part # 850682

SMC Inline Solid PNP Rail: D-F7PWL, Inline Solid State Auto Switch, PNP, IP67

CONRADER Safety Valve: Hard Seat, 1/8 in (M)NPT Inlet (In.), 1/8 in (F)NPT Outlet (In.)

SMC Air Cylinder Sensor Mounting Hardware: Fits 25 mm Bore Dia, Nylon

DYNABRADE Housing for Model 53096,20,000 RPM: Mfr Part # 53119

Parker Activated Carbon Replacement Element: Activated Carbon

OEM Hexagon Bolt Set: PN22N023G, 1NNE5

VIAIR CORPORATION Portable Air Compressor: Quiet, Oil Free, 2.5 gal, Horizontal, 0.35 hp

NEX FLOW Vortex Tube: 40 scfm Max Flow Rate, 2,900 BtuH Cooling Capacity, 28°F to 129°F

SMC Solenoid Valve: Single Solenoid, Five-Way / Two-Position, 8.57 scfm Flow Rate - Max

BOSTITCH Washer: Mfr Part # LW14

INGERSOLL RAND Kit, Safety Latch: Mfr Part # 7328-A

DYNABRADE Gear: Mfr Part # 54519

INGERSOLL RAND Rotary Screw Air Compressor: 20 hp, 78 cfm, 230V AC

DEVILBISS Valve Check 1/2 NPT: A19712, Check Valve

SOLBERG Pneumatic Oil Filter: 0.3 micron Rating, 99.97% Efficiency

SCHMALZ Vacuum Pad Assembly: Multi-Bellows, 3.5 Folds, G1/4 in Vacuum Port, 33.5 mm Pad Dia

CHICAGO PNEUMATIC Cup Spring: Mfr Part # A113838

CHICAGO PNEUMATIC Tune Up Kit CP7763: 8940162925, Tune Up Kit

INGERSOLL RAND Rotary Screw Air Compressor: 75 kW, 499 cfm, 0.5 gal Tank, 460V AC

DYNABRADE Gear: For 12250

SPEEDAIRE Spring,Oil Monitor: P05227A

PARKER 3-Stage Sterile Air Filter Assembly: Coalescing, 1 1/2 in NPT, 0.01 micron

SMC Inline Reed Auto Switch: D-B59WL, Inline Reed Auto Switch, IP67, 24 V DC

PIAB Vacuum Pad Assembly: G3/8 in, 53.01 mm Pad Dia, Polyurethane, Yellow, 55.12 mm Pad Ht

BOSTITCH Pin Stop Block: Mfr Part # 175570

SMC Lubrication Plug Assembly: AL

NUMATICS Solenoid Air Control Valve: Four-Way / Three-Position, Double Solenoid

SPEEDAIRE Hp Exhaust Manfold: M1508, 1WD25/1WD91/1WD92/1WD93/1WD94/1WD95/1WD96

CHICAGO PNEUMATIC Reciprocating Saw: 10,000 stroke/min, 1/4 in NPT, 3/8 in Stroke Lg

SPEEDAIRE Gear Link: Mfr Part # TT204221G

BOSTITCH Air Nail Gun: Metal Connector, 35°, Paper, 1/4 in NPT, Sequential

CHICAGO PNEUMATIC Throttle Lever: Mfr Part # CA144879

RENEWABLE LUBRICANTS Air Tool Oil: Synthetic, -20°F Min. Op Temp., 446°F Max. Op Temp.

SCHMALZ Vacuum Pad Assembly: Bellows, 1.5 Folds, G1/4 in Vacuum Port, 47.5 mm Pad Dia

GAST Air Motor: 0.38 hp, 2.7 in-lb Torque, 10,000 RPM, 22 cfm, Hub, 1/8 in NPT

WILKERSON Compressed Air Filter Element: Particulate, 5 micron

DYNABRADE Muffler Insert: Mfr Part # 56027

WILKERSON Automatic Float Drain: Plastic, GRP

ARO Manifold: Side-Ported Body, 0°F to 122°F, 22 psi to 115 psi, Female 1/8 in NPT

SMC Inline Solid 2 Wire Direct: D-M9BW, Inline Solid State Auto Switch, IP67

CHICAGO PNEUMATIC Drive Cover: Mfr Part # CA145102, Drive Plate, Compatible with Mfr Part # CP870

CHICAGO PNEUMATIC Rotary Screw Air Compressor w/Air Dryer: Horizontal, 7 1/2 hp

EXCELTA Vacuum Cup: Cup, 0.13 in Tip Size, 1/5 in Overall Ht, Buna-N

CONTROL DEVICES Air Safety Valve: Hard Seat, 3/8 in (M)NPT Inlet (In.)

BOSTITCH Assembly Pusher Spring: Mfr Part # 175576