ORION

ORION Schedule 40 unthreaded pipe is rated for a maximum operating temperature of 285°F. This rating applies across the available fitting pipe sizes, including 1-1/2 in, 2 in, 3 in, and 4 in. The pipe is white, no-hub, and complies with UL 723 or ASTM E-84 standards depending on the specific SKU. At elevated temperatures, verify that the fluid being conveyed is compatible with the pipe material and that the system's pressure rating remains within safe limits. For applications above 285°F, alternative materials or schedules should be evaluated.

ORION Schedule 80 polypropylene pipe uses socket heat fusion as the sealing method. This process joins pipe and fittings by heating the mating surfaces and fusing them into a continuous, homogeneous connection without gaskets, O-rings, or adhesives. Socket heat fusion produces leak-free joints that are resistant to chemical attack and mechanical stress. The pipe is supplied in white, with nominal pipe sizes of 1/2 in and 1 in, and overall lengths of 10 ft. Installation requires a compatible heat fusion tool and adherence to the manufacturer's joining procedures for proper joint integrity.

ORION dilution tanks are available with a 1.5-gallon capacity and an included inlet for mixing concentrated chemicals with water. Two common configurations are: one with an overall diameter of 9 in, width of 9 in, and length of 12 1/8 in; and another with an overall diameter of 9 in, width of 9 in, and depth of 10 in. Both are black plastic units intended for controlled mixing and containment of liquid waste. The inlet allows direct connection to drainage or supply lines. These tanks are used in janitorial, facility maintenance, and laboratory applications where chemical dilution or waste neutralization is required.

ORION Schedule 40 unthreaded pipes comply with UL 723 or ASTM E-84 standards, depending on the specific SKU. For example, the 1-1/2 in, 2 in, and 4 in sizes meet UL 723, while the 3 in size meets ASTM E-84. These standards address surface burning characteristics and flame spread for building materials. The pipes are white, no-hub, and rated for a maximum operating temperature of 285°F. When specifying for a project, confirm the applicable standard for the exact part number, as compliance may vary by size. 3G Electric provides this data for each SKU to support submittal and verification processes.

ORION Schedule 80 polypropylene pipe is available in nominal pipe sizes of 1/2 in and 1 in. Both sizes are supplied in white, with an overall length of 10 ft per section. The pipe is unthreaded and joined using socket heat fusion. The 1/2 in size carries manufacturer part number 790401, and the 1 in size carries 790406. These sizes are commonly used in industrial piping systems requiring chemical resistance and leak-free joints. For other sizes or configurations, consult 3G Electric with the specific application requirements.

Yes, ORION dilution tanks are used in laboratory settings as well as janitorial and facility maintenance applications. The 1.5-gallon plastic tanks include an inlet for mixing concentrated chemicals with water, which supports controlled dilution and containment of liquid waste. Their dimensions—9 in diameter with either 12 1/8 in length or 10 in depth—allow installation in confined spaces such as under sinks or within cabinets. The black plastic construction is compatible with many common laboratory chemicals, but material compatibility should be verified for specific substances. These tanks are not intended for pressurized service; they operate as gravity-fed or open containment units.