We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

NVENT ERICO

nVent ERICO is a product line within nVent, a global manufacturer of electrical enclosures, electrical and fastening solutions, and thermal management products. The ERICO brand has a long history in grounding, bonding, and surge protection, and today the nVent ERICO portfolio includes grounding rods, clamps, couplings, accessories, surge protective devices (SPDs), and rooftop support systems. These products are used in electrical grounding and bonding systems, lightning protection, surge suppression for AC power systems, and mechanical support of conduit, cable trays, and piping on flat roofs. 3G Electric supplies nVent ERICO components to plant engineers, maintenance managers, and procurement specialists worldwide, supporting both new installations and maintenance replacements.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 1 of 5
← Prev123…5Next →

About NVENT ERICO

nVent ERICO is a product line within nVent, a global manufacturer of electrical enclosures, electrical and fastening solutions, and thermal management products. The ERICO brand has a long history in grounding, bonding, and surge protection, and today the nVent ERICO portfolio includes grounding rods, clamps, couplings, accessories, surge protective devices (SPDs), and rooftop support systems. These products are used in electrical grounding and bonding systems, lightning protection, surge suppression for AC power systems, and mechanical support of conduit, cable trays, and piping on flat roofs. 3G Electric supplies nVent ERICO components to plant engineers, maintenance managers, and procurement specialists worldwide, supporting both new installations and maintenance replacements.

The nVent ERICO grounding product family includes copper-bonded ground rods, bronze clamps, threadless compression couplings, and drive sleeves. For example, the CP58 bronze ground rod clamp is rated for 5/8 in copper-bonded rods and accepts 8 AWG SOL to 2 AWG STR grounding wires, with a torque specification of 150 in-lb and suitability for direct burial. The CC58 threadless compression coupling joins ground rods without threading, accommodating conductor sizes from #8 SOL to #2 STR. The EDS58 drive sleeve slides onto the top of a ground rod to prevent mushrooming during installation, also accommodating #8 SOL to #2 STR. These accessories are used in grounding systems for electrical installations, helping to ensure secure, low-resistance connections.

nVent ERICO surge protective devices include external-mount and surface-mount options for single-phase and three-phase systems. The TDX400S120/240 is a single-phase, chase-nipple external-mount SPD with a metal enclosure, rated for 120/240V AC, 400kA surge current per mode, and 800V L-G/L-N protection. The TDX100C240 is a single-phase external-mount SPD rated 240V AC with a maximum continuous operating voltage of 275V AC, providing 1000V protection (L-G, L-N, N-G) and 100kA surge current. The TDX300S277/480 is a three-phase external surface-mount SPD for 277/480V AC Wye systems, with a metal enclosure, 300kA maximum surge current per mode, and 1000V N-G voltage protection rating. Many models include voltage-free contacts for remote status monitoring.

nVent ERICO also offers rooftop support blocks with strut channel for elevating and securing conduit, cable trays, or piping on flat roofs. The RPS50H4EG features an electro-galvanized steel support and a polyethylene base measuring 10.375 in L x 4 in W. The PHK model has a 12.375 in L x 12.375 in W polyethylene base and a polypropylene plastic support, with an overall length of 12.38 in and height of 4.6 in. These supports are used to mount and secure infrastructure on rooftops without penetrating the roof membrane.

3G Electric supports the nVent ERICO line by stocking a range of grounding accessories, SPDs, and support blocks, and by providing logistics support for global shipments. Technical buyers can source specific manufacturer part numbers, verify specifications, and obtain quotes for project or maintenance requirements. The product range covers common voltage ratings, conductor sizes, and mounting configurations, allowing specification of nVent ERICO components for diverse electrical and mechanical applications.

Common Applications

  • Electrical grounding systems — nVent ERICO CP58 bronze ground rod clamp for 5/8 in copper-bonded rods in direct burial applications.
  • Ground rod installation — nVent ERICO EDS58 drive sleeve to prevent mushrooming of rod tops during driving.
  • Ground rod joining — nVent ERICO CC58 threadless compression coupling for connecting ground rods in grounding systems.
  • AC power surge protection — nVent ERICO TDX400S120/240 SPD for 120/240V AC single-phase systems with 400kA surge rating.
  • Three-phase surge protection — nVent ERICO TDX300S277/480 SPD for 277/480V AC Wye systems with 300kA surge rating.
  • Rooftop infrastructure support — nVent ERICO RPS50H4EG support block with strut channel for elevating conduit on flat roofs.

Frequently asked questions

Common questions about NVENT ERICO from 3G Electric.

What is the nVent ERICO CP58 ground rod clamp used for?

The nVent ERICO CP58 is a bronze ground rod clamp designed for 5/8 in copper-bonded ground rods. It accepts one grounding wire from 8 AWG SOL to 2 AWG STR and is suitable for direct burial applications. The clamp has a torque specification of 150 in-lb. It is used to connect grounding conductors to ground rods in electrical grounding and bonding systems, providing a secure and corrosion-resistant connection. The bronze construction offers durability in soil environments.

What are the voltage and surge ratings of the nVent ERICO TDX400S120/240 SPD?

The nVent ERICO TDX400S120/240 is a single-phase, chase-nipple external-mount surge protective device with a metal enclosure. It is rated for 120/240V AC systems and provides 400kA surge current per mode with 800V L-G/L-N protection. The device includes a voltage-free contact for remote monitoring. It is used to protect electrical equipment from transient overvoltages on 120/240V AC power systems.

How does the nVent ERICO EDS58 drive sleeve prevent ground rod damage?

The nVent ERICO EDS58 drive sleeve slides onto the top of a ground rod during installation to prevent mushrooming, which occurs when the rod top deforms from hammering. The sleeve accommodates conductor sizes from #8 SOL to #2 STR. By protecting the rod top, it helps maintain the rod's integrity and ensures proper connection to grounding conductors. The EDS58 is a reusable accessory that fits standard ground rods used in electrical grounding systems.

What are the specifications of the nVent ERICO RPS50H4EG rooftop support?

The nVent ERICO RPS50H4EG is a support block with strut channel for elevating and securing conduit, cable trays, or piping on flat roofs. It features an electro-galvanized steel support and a polyethylene base measuring 10.375 in L x 4 in W. The electro-galvanized steel provides corrosion resistance, while the polyethylene base distributes weight and protects the roof membrane. This support is used in rooftop installations where penetration of the roof is not desired.

What is the difference between the nVent ERICO TDX100C240 and TDX300S277/480 SPDs?

The nVent ERICO TDX100C240 is a single-phase, chase-nipple external-mount SPD rated for 240V AC with a maximum continuous operating voltage of 275V AC. It provides 1000V protection (L-G, L-N, N-G) and 100kA surge current. The TDX300S277/480 is a three-phase external surface-mount SPD for 277/480V AC Wye systems, with a metal enclosure, 300kA maximum surge current per mode, and 1000V N-G voltage protection rating. Both include voltage-free contacts. The primary differences are phase configuration, voltage rating, and surge current capacity.

Can nVent ERICO ground rod couplings be used for direct burial?

The nVent ERICO CC58 threadless compression coupling is designed for joining ground rods and accommodates conductor sizes from #8 SOL to #2 STR. While the product description does not explicitly state direct burial suitability, the coupling is intended for use in grounding systems, which often involve buried rods. For specific burial applications, consult the manufacturer's installation instructions and local electrical codes. The threadless compression design provides a secure mechanical connection without requiring threading of the rods.