IPT PUMPS

IPT Pumps is a manufacturer of engine-driven water pumps, trash pumps, and high-pressure pumps used in construction, agriculture, municipal, and industrial dewatering applications. The product line is built around portable, recoil-start gasoline engines paired with centrifugal pump ends, and is distributed globally through industrial equipment channels including 3G Electric. The catalog covers three primary families: standard engine-driven water pumps, engine-driven trash pumps, and high-pressure engine-driven water pumps. Standard water pumps are configured with thermoplastic or cast-iron volutes, 2-inch to 3-inch FNPT or MNPT connections, and flow rates from 176 gpm to 330 gpm at 20 feet of head. Trash pumps use cast-iron volutes and are sized for solids-laden water, with 2-inch and 3-inch MNPT ports and flow rates from 220 gpm to 350 gpm at 20 feet of head. High-pressure models are centrifugal pumps with cast-iron volutes, 2-inch MNPT connections, and maximum heads up to 215 feet, with solids handling up to 1/16 inch. Engine options include 5 hp, 8 hp, and 13 hp configurations, with Honda engines specified on several models. Ignition is recoil-start across the line. Kits ship with application-specific components such as carry handles, heavy-duty steel roll frames, and strainers, depending on the model. These pumps are used for dewatering, flood response, irrigation, water transfer, and general construction site drainage. 3G Electric supplies the IPT Pumps line with logistics support for international orders, providing spec sheets, model selection assistance, and quotation services for procurement and maintenance teams specifying engine-driven pump packages.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Origin

Get a Quote WhatsApp Sales Telegram Sales

EXW Singapore

Collect or forward from our office

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

BrandIPT PUMPS

CategoryEngine-Driven Trash Pumps

Sign inAvailable

← Prev1 2 Next →

About IPT PUMPS

Common Applications

Construction site dewatering — IPT Pumps 3-inch trash pump with 8 hp Honda engine and roll frame for moving solids-laden water.
Flood response and emergency drainage — IPT Pumps 2-inch engine-driven trash pump with strainer for debris-heavy water removal.
Agricultural irrigation — IPT Pumps high-pressure centrifugal pump with 2-inch MNPT connections and 215 ft maximum head.
Municipal water transfer — IPT Pumps 3-inch engine-driven water pump with 330 gpm flow rate at 20 feet of head.
Industrial process water movement — IPT Pumps 13 hp high-pressure pump with cast-iron volute and roll frame kit.
Rental fleet and portable pumping — IPT Pumps 5 hp recoil-start water pump with carry handle and thermoplastic volute.

Frequently asked questions

Common questions about IPT PUMPS from 3G Electric.

What is the difference between IPT Pumps engine-driven water pumps and trash pumps?

IPT Pumps engine-driven water pumps are configured for relatively clean water transfer, with flow rates from 176 gpm to 330 gpm at 20 feet of head and port sizes from 2-inch to 3-inch. Trash pumps use cast-iron volutes and are built to pass solids-laden water, with 2-inch and 3-inch MNPT ports and flow rates from 220 gpm to 350 gpm at 20 feet of head. Trash pump kits often include a strainer or roll frame. Selection depends on the solids content and debris size in the fluid being pumped.

What engine sizes are available in the IPT Pumps line?

IPT Pumps engine-driven models are offered with 5 hp, 8 hp, and 13 hp recoil-start engines. The 5 hp units appear in standard water pumps, trash pumps, and high-pressure models. The 8 hp configuration is used on larger water and trash pumps, including models with Honda engines. The 13 hp engine is used on high-pressure centrifugal models such as the 2MP13HR. All listed models use recoil-start ignition.

What is the maximum head for IPT Pumps high-pressure engine-driven water pumps?

IPT Pumps high-pressure engine-driven water pumps are centrifugal models with cast-iron volutes and 2-inch MNPT connections. The 5 hp model 2P5XHR is rated to a maximum head of 215 feet and handles solids up to 1/16 inch in diameter. The 13 hp model 2MP13HR is also a centrifugal high-pressure unit with a cast-iron volute and roll frame kit. These pumps are used where higher discharge pressure is required than standard water pump models provide.

What kit components ship with IPT Pumps engine-driven pumps?

Kit components vary by model. Standard water pumps may include a carry handle or heavy-duty steel roll frame. Trash pumps typically include a roll frame for transport, and some models include a strainer. High-pressure models such as the 2MP5HR include a strainer, while the 2MP13HR includes a roll frame kit. The specific kit contents are listed on each product page and should be confirmed at the time of order.

What port sizes and connection types are used on IPT Pumps engine-driven pumps?

IPT Pumps engine-driven pumps use FNPT and MNPT connections depending on the model. Standard water pumps are available with 2-inch FNPT or 3-inch FNPT and MNPT ports. Trash pumps use 2-inch or 3-inch MNPT inlet and outlet connections. High-pressure models use 2-inch MNPT inlet and outlet, with some models specifying a 1 1/2-inch MNPT outlet. Confirm the exact connection type and size against the model number before specifying piping or hose assemblies.

How does 3G Electric support IPT Pumps orders?

3G Electric supplies the IPT Pumps line with international logistics support, quotation services, and model selection assistance for procurement and maintenance teams. The catalog includes engine-driven water pumps, trash pumps, and high-pressure models across 5 hp, 8 hp, and 13 hp configurations. Buyers can request spec sheets, confirm kit components, and verify port sizes and flow rates before ordering. 3G Electric ships globally and works with standard commercial terms for industrial equipment purchases.