We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
GKS-PERFEKT logo

GKS-PERFEKT

GKS-PERFEKT is a German manufacturer of hydraulic lifting and load-moving equipment, known for toe jacks, machine rollers, and hydraulic pump units used in industrial rigging, maintenance, and machine installation. The brand's product line is built around low-clearance lifting and controlled load translation, with an emphasis on steel construction and air/hydraulic or pneumatic actuation for use in confined spaces and high-cycle industrial environments. 3G Electric supplies the GKS-PERFEKT range globally, with stock including low-clearance toe jacks from 5 to 30 tons, front- and rear-support machine rollers rated from 13,200 lb to 44,000 lb, and corded electric hydraulic pump units for powering single-acting cylinders and related tooling.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 1 of 4
← Prev1234Next →

About GKS-PERFEKT

GKS-PERFEKT is a German manufacturer of hydraulic lifting and load-moving equipment, known for toe jacks, machine rollers, and hydraulic pump units used in industrial rigging, maintenance, and machine installation. The brand's product line is built around low-clearance lifting and controlled load translation, with an emphasis on steel construction and air/hydraulic or pneumatic actuation for use in confined spaces and high-cycle industrial environments. 3G Electric supplies the GKS-PERFEKT range globally, with stock including low-clearance toe jacks from 5 to 30 tons, front- and rear-support machine rollers rated from 13,200 lb to 44,000 lb, and corded electric hydraulic pump units for powering single-acting cylinders and related tooling.

The toe jack family covers air/hydraulic and pneumatic configurations. Minimum lift heights range from 5/8 in on the 5-ton and 10-ton models to 1 19/32 in on the 30-ton pneumatic unit, allowing the toe to be inserted under machine bases, skids, and baseplates where standard jacks cannot fit. Steel bodies and non-slip friction pads are standard on several models, and load capacities are marked at 5, 10, 15, 20, and 30 tons. These jacks are typically paired with hydraulic pump units or used as standalone tools for machinery alignment, shimming, and relocation.

Machine rollers in the GKS-PERFEKT line are configured as front- and rear-support sets with eight rollers per unit, rubber-padded decks, and pulling handles with tow eyes on smaller models. Deck heights range from 4 3/8 in to 7 1/8 in, and capacities from 13,200 lb to 44,000 lb. The roller sets are used to move skidded loads across flat industrial floors, with the front and rear units working together to distribute weight and maintain directional control. Red finish and steel or rubber-padded load surfaces are consistent across the range.

Hydraulic pump units include corded electric models such as the 120V AC, 1/2 hp unit delivering up to 7,542 psi with a 2-way valve. These pumps are intended to power single-acting hydraulic cylinders and tools, and they are matched to the pressure and flow requirements of the toe jacks and other hydraulic equipment in the GKS-PERFEKT catalog. The combination of pump units and jacks allows for remote or bench-mounted operation where manual pumping is impractical.

3G Electric supports the GKS-PERFEKT line by stocking individual SKUs across the toe jack, machine roller, and pump unit families, and by providing specification-level data for each item, including load capacity, minimum lift, deck height, roller count, motor rating, and maximum operating pressure. For procurement and maintenance teams, this means the ability to source replacement or additional units by MPN, verify dimensional and capacity compatibility against existing equipment, and consolidate orders across the GKS-PERFEKT range. The product data is structured for cross-reference against plant standards and job-specific lift plans, with UNSPSC coding and manufacturer part numbers available for each SKU.

Common Applications

  • Heavy machinery installation — GKS-PERFEKT 20-ton air/hydraulic toe jack (MPN 1-10184) for lifting baseplates and skids with 1 3/16 in minimum clearance.
  • Plant relocation — GKS-PERFEKT 44,000 lb front- and rear-support machine rollers (MPN 3-11061) for moving large equipment across flat floors.
  • Confined-space maintenance — GKS-PERFEKT 5-ton air/hydraulic toe jack (MPN 1-10181) with 5/8 in minimum lift for low-clearance lifting under machine bases.
  • Hydraulic tool power — GKS-PERFEKT 120V AC electric hydraulic pump unit (MPN 2-10199) delivering 7,542 psi for single-acting cylinders and jacks.
  • Heavy load translation — GKS-PERFEKT 13,200 lb machine rollers (MPN 3-10209) with pulling handle and tow eye for repositioning skidded equipment.
  • High-capacity lifting — GKS-PERFEKT 30-ton pneumatic toe jack (MPN 1-11140) with 1 19/32 in minimum lift for heavy machinery in tight spaces.

Frequently asked questions

Common questions about GKS-PERFEKT from 3G Electric.

What is the difference between the GKS-PERFEKT air/hydraulic and pneumatic toe jacks?

GKS-PERFEKT toe jacks are offered in air/hydraulic and pneumatic configurations. Air/hydraulic models use compressed air to drive a hydraulic pump section, producing high force from a compact body; examples include the 5-ton, 10-ton, 15-ton, and 20-ton units with minimum lift heights from 5/8 in to 1 3/16 in. The pneumatic 30-ton model uses air-powered actuation directly and has a 1 19/32 in minimum lift. Both types are steel-bodied and intended for low-clearance lifting. Selection depends on required capacity, available starting clearance, and whether the site has compressed air at the required pressure and flow.

What load capacities are available in the GKS-PERFEKT machine roller range?

The GKS-PERFEKT front- and rear-support machine roller range includes units rated at 13,200 lb and 44,000 lb. The 13,200 lb model has a 4 3/8 in deck height, measures 6 3/4 in by 6 3/4 in, and includes eight rollers plus a pulling handle with tow eye. The 44,000 lb model has a 7 1/8 in rubber-padded deck height, measures 9 7/8 in by 9 7/8 in, and also uses eight rollers. Both are finished in red and are designed to be used as front and rear support sets for moving skidded or palletized loads across flat floors.

What hydraulic pressure does the GKS-PERFEKT corded electric pump unit produce?

The GKS-PERFEKT corded lightweight electric hydraulic pump unit operates on 120V AC with a 1/2 hp motor and delivers a maximum operating pressure of 7,542 psi. It uses a 2-way valve and is suitable for powering single-acting hydraulic cylinders and tools. When matching this pump to GKS-PERFEKT toe jacks or other hydraulic equipment, verify the cylinder or tool pressure rating and oil volume requirements against the pump's output. The unit is intended for applications where manual pumping is not practical or where consistent pressure is required over multiple lift cycles.

How do I select a GKS-PERFEKT toe jack for a low-clearance lifting task?

Selection depends on three primary factors: the load to be lifted, the available clearance under the load, and the power source available. GKS-PERFEKT toe jacks range from 5 to 30 tons. Minimum lift heights start at 5/8 in for the 5-ton and 10-ton air/hydraulic models, 1 in for the 15-ton, 1 3/16 in for the 20-ton, and 1 19/32 in for the 30-ton pneumatic unit. Confirm that the toe thickness fits the gap under the machine base or skid, that the capacity exceeds the load with an appropriate safety factor, and that air supply or hydraulic pump capacity matches the jack's requirements.

Are GKS-PERFEKT toe jacks and machine rollers available with specific part numbers for reordering?

Yes. Each GKS-PERFEKT item in the 3G Electric catalog is listed with its manufacturer part number (MPN) and UNSPSC code where applicable. Examples include MPN 1-10181 for the 5-ton air/hydraulic toe jack, 1-10182 for the 10-ton, 1-10183 for the 15-ton, 1-10184 for the 20-ton, and 1-11140 for the 30-ton pneumatic model. Machine roller MPNs include 3-10209 for the 13,200 lb unit and 3-11061 for the 44,000 lb unit. The electric pump unit is listed under MPN 2-10199. These identifiers allow cross-reference against existing plant records and reorder processes.

What is the deck height and roller configuration of the GKS-PERFEKT 44,000 lb machine roller?

The GKS-PERFEKT 44,000 lb front- and rear-support machine roller has a rubber-padded deck height of 7 1/8 in and measures 9 7/8 in long by 9 7/8 in wide. It uses eight rollers and is finished in red. The unit is designed for moving heavy machinery and equipment where a higher deck height is acceptable and the load requires the full 44,000 lb capacity. It is typically used in pairs or sets with front and rear support units to distribute weight and allow controlled translation across flat industrial surfaces.