EAGLE BELTING

Eagle Belting solid-core rough round belts are specified by diameter, hardness, minimum pulley diameter, and overall length. Diameters range from 3 mm to 15 mm. Hardness is typically 89A or 90A. Minimum pulley diameters range from 27 mm for the 3 mm belt to 135 mm for the 15 mm belt. Standard length is 100 ft. The belts are made of polyurethane and have a green color with a rough surface finish. These specifications determine the belt's load capacity and compatibility with pulleys. When selecting a belt, ensure the minimum pulley diameter is not smaller than specified to avoid excessive bending stress.

The hardness rating indicates the durometer of the polyurethane compound. 89A and 90A are very close, with 90A being slightly harder. In practice, both provide similar performance for most power transmission applications. The difference may affect grip and wear characteristics marginally. Eagle Belting offers both ratings across different diameters. For example, the 7 mm and 8 mm belts are 90A, while most others are 89A. Selection should be based on the specific application requirements, such as the amount of slip acceptable and the operating environment. Harder belts may resist abrasion better but could offer slightly less grip on smooth pulleys.

Yes, Eagle Belting round belts are typically supplied in 100 ft lengths and can be cut to the required length and joined using appropriate splicing methods. Common methods include heat welding or mechanical fasteners, depending on the belt material and application. Polyurethane round belts can be heat-welded to create a continuous loop. The rough surface may require specific splicing techniques to ensure a smooth joint. It is important to follow the manufacturer's guidelines for splicing to maintain belt strength. 3G Electric provides datasheets where available, which may include splicing instructions. For critical applications, consider ordering pre-made belts or consulting with a technical representative.

Eagle Belting solid-core rough round belts are used in power transmission applications such as conveyors, packaging machinery, textile equipment, and small drive systems. The rough surface provides grip, making them suitable for applications where slip is a concern. The solid-core construction offers dimensional stability. They are often found in light- to medium-duty drives. The polyurethane material resists oils, greases, and many chemicals, so they can be used in industrial environments. They are not intended for high-torque or high-speed applications where V-belts or timing belts would be more appropriate. The minimum pulley diameter specification must be observed to prevent premature failure.

3G Electric lists Eagle Belting products with detailed specifications, including diameter, hardness, minimum pulley diameter, and overall length. Each product page includes a summary and specs table. Datasheets are available for many SKUs. 3G Electric provides quotation services and global logistics support. For technical buyers, this means you can compare specifications across the product line and request a quote for the exact belts needed. 3G Electric does not manufacture these belts but distributes them. If you need assistance with selection, you can contact 3G Electric with your application details, and they can help identify the appropriate SKU based on the required diameter and pulley size.

The 3G Electric catalog includes Eagle Belting solid-core rough round belts in diameters of 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 12 mm, and 15 mm. Other diameters may be available from Eagle Belting but are not currently listed. The catalog represents 74 SKUs, which may include other belt types and sizes. For specific diameter requirements not shown, contact 3G Electric to inquire about availability. Eagle Belting's product line may include additional sizes, but only those listed are confirmed in the 3G Electric catalog. Custom sizes may require minimum order quantities or longer lead times.