We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

DYNA-LIFT

DYNA-LIFT is a brand of hydraulic lift equipment used in industrial maintenance, material handling, and positioning tasks. The product line supplied by 3G Electric centers on electric hydraulic lift kits, which combine a hydraulic actuator with a 115V AC motor to raise and lower loads under power. These kits are available in multiple stroke lengths and end configurations, allowing integration into different mechanical setups. The electric hydraulic lift kits from DYNA-LIFT are rated for system loads of 1,000 lb or 1,500 lb, depending on the model. Stroke options include 6 inches, 8 inches, 12 inches, and 16 inches, providing a range of vertical travel for different applications. End types include caster and foot with glide, which affect how the lift interfaces with the floor or mounting surface. Caster end types support mobile positioning, while foot with glide end types are suited to stationary or semi-permanent installations where the lift foot slides or rests on a surface. All models operate on 115V AC, a common voltage for industrial and commercial power supplies in many regions. The manufacturer part numbers follow a structured format, such as 4E-D1C-16-S, where the suffix and middle characters indicate stroke and end type. This naming convention helps technical buyers identify compatible replacement units or specify new installations. 3G Electric supplies DYNA-LIFT electric hydraulic lift kits to plant engineers, maintenance managers, and procurement specialists worldwide. The product range includes multiple SKUs covering different stroke and load combinations, with logistics support for international orders. 3G Electric provides access to these lift kits as part of its broader catalog of industrial equipment, which includes burners, pumps, gas controls, and related components. For technical buyers, the key specifications to consider are stroke length, system load rating, motor voltage, and end type. These parameters determine the lift's suitability for a given task, such as raising equipment for maintenance, positioning components during assembly, or adjusting the height of work surfaces. The 115V AC motor is standard across the electric hydraulic lift kits in this line, simplifying power requirements. The load ratings of 1,000 lb and 1,500 lb cover a range of medium-duty lifting needs. The caster end type allows the lift to be moved into position before lifting, which can be useful in maintenance operations where the lift must be relocated between tasks. The foot with glide end type provides a stable base that can slide or be fixed, depending on the installation. DYNA-LIFT electric hydraulic lift kits are used in applications where controlled vertical motion is required without manual pumping. The electric motor eliminates the need for manual hydraulic pumps, reducing operator effort and allowing for consistent lifting cycles. This can be beneficial in repetitive tasks or where access is limited. The kits are typically integrated into machinery, workstations, or mobile equipment. 3G Electric supports the DYNA-LIFT line by stocking multiple SKUs and providing global shipping. Technical documentation, including specifications and part numbers, is available to assist with selection and procurement. For buyers needing to replace a failed unit or specify a new lift, the model numbers and specifications allow cross-referencing. 3G Electric's role is to supply these components and facilitate order fulfillment, not to manufacture or modify the lifts. The information provided here is based on the product data available for the DYNA-LIFT electric hydraulic lift kits offered by 3G Electric. For detailed engineering drawings or installation instructions, consult the manufacturer's documentation.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 1 of 3
← Prev123Next →

About DYNA-LIFT

DYNA-LIFT is a brand of hydraulic lift equipment used in industrial maintenance, material handling, and positioning tasks. The product line supplied by 3G Electric centers on electric hydraulic lift kits, which combine a hydraulic actuator with a 115V AC motor to raise and lower loads under power. These kits are available in multiple stroke lengths and end configurations, allowing integration into different mechanical setups. The electric hydraulic lift kits from DYNA-LIFT are rated for system loads of 1,000 lb or 1,500 lb, depending on the model. Stroke options include 6 inches, 8 inches, 12 inches, and 16 inches, providing a range of vertical travel for different applications. End types include caster and foot with glide, which affect how the lift interfaces with the floor or mounting surface. Caster end types support mobile positioning, while foot with glide end types are suited to stationary or semi-permanent installations where the lift foot slides or rests on a surface. All models operate on 115V AC, a common voltage for industrial and commercial power supplies in many regions. The manufacturer part numbers follow a structured format, such as 4E-D1C-16-S, where the suffix and middle characters indicate stroke and end type. This naming convention helps technical buyers identify compatible replacement units or specify new installations. 3G Electric supplies DYNA-LIFT electric hydraulic lift kits to plant engineers, maintenance managers, and procurement specialists worldwide. The product range includes multiple SKUs covering different stroke and load combinations, with logistics support for international orders. 3G Electric provides access to these lift kits as part of its broader catalog of industrial equipment, which includes burners, pumps, gas controls, and related components. For technical buyers, the key specifications to consider are stroke length, system load rating, motor voltage, and end type. These parameters determine the lift's suitability for a given task, such as raising equipment for maintenance, positioning components during assembly, or adjusting the height of work surfaces. The 115V AC motor is standard across the electric hydraulic lift kits in this line, simplifying power requirements. The load ratings of 1,000 lb and 1,500 lb cover a range of medium-duty lifting needs. The caster end type allows the lift to be moved into position before lifting, which can be useful in maintenance operations where the lift must be relocated between tasks. The foot with glide end type provides a stable base that can slide or be fixed, depending on the installation. DYNA-LIFT electric hydraulic lift kits are used in applications where controlled vertical motion is required without manual pumping. The electric motor eliminates the need for manual hydraulic pumps, reducing operator effort and allowing for consistent lifting cycles. This can be beneficial in repetitive tasks or where access is limited. The kits are typically integrated into machinery, workstations, or mobile equipment. 3G Electric supports the DYNA-LIFT line by stocking multiple SKUs and providing global shipping. Technical documentation, including specifications and part numbers, is available to assist with selection and procurement. For buyers needing to replace a failed unit or specify a new lift, the model numbers and specifications allow cross-referencing. 3G Electric's role is to supply these components and facilitate order fulfillment, not to manufacture or modify the lifts. The information provided here is based on the product data available for the DYNA-LIFT electric hydraulic lift kits offered by 3G Electric. For detailed engineering drawings or installation instructions, consult the manufacturer's documentation.

Common Applications

  • Industrial maintenance — DYNA-LIFT electric hydraulic lift kit with 16-inch stroke and caster end (MPN 4E-D1C-16-S) for raising equipment during repair.
  • Material handling — DYNA-LIFT electric hydraulic lift kit with 8-inch stroke and 1,500 lb rating (MPN 4E-D1D-08-H) for positioning heavy loads.
  • Assembly operations — DYNA-LIFT electric hydraulic lift kit with 6-inch stroke and foot with glide end (MPN 4E-D1A-06-S) for adjusting work heights.
  • Mobile positioning — DYNA-LIFT electric hydraulic lift kit with 12-inch stroke and caster end (MPN 4E-D1C-12-S) for moving and lifting components.
  • Stationary lifting — DYNA-LIFT electric hydraulic lift kit with 12-inch stroke and 1,500 lb rating (MPN 4E-D1D-12-H) for fixed installations.
  • Equipment setup — DYNA-LIFT electric hydraulic lift kit with 16-inch stroke and foot with glide end (MPN 4E-D1A-16-S) for leveling machinery.

Frequently asked questions

Common questions about DYNA-LIFT from 3G Electric.

What stroke lengths are available for DYNA-LIFT electric hydraulic lift kits?

DYNA-LIFT electric hydraulic lift kits are available in stroke lengths of 6 inches, 8 inches, 12 inches, and 16 inches. The stroke length determines the vertical travel distance of the lift. For example, the 6-inch stroke models (such as MPN 4E-D1A-06-S and 4E-D1C-06-S) provide shorter travel, while the 16-inch stroke models (such as 4E-D1A-16-S and 4E-D1C-16-S) offer longer travel. The choice depends on the required lift height for the application. All models operate on 115V AC and have system load ratings of either 1,000 lb or 1,500 lb, depending on the specific model.

What is the difference between caster and foot with glide end types on DYNA-LIFT lift kits?

The end type refers to the base or mounting interface of the lift. Caster end types are equipped with wheels, allowing the lift to be moved easily across a floor for mobile positioning. Foot with glide end types have a flat foot that can slide or rest on a surface, providing a more stationary base. Caster models are typically used where the lift needs to be relocated between tasks, while foot with glide models are used in fixed or semi-fixed installations. Both end types are available across various stroke lengths and load ratings in the DYNA-LIFT electric hydraulic lift kit line.

What is the system load rating for DYNA-LIFT electric hydraulic lift kits?

DYNA-LIFT electric hydraulic lift kits have system load ratings of either 1,000 lb or 1,500 lb. The load rating indicates the maximum weight the lift system is designed to raise and support. Models with a 1,000 lb rating include those with MPNs such as 4E-D1A-06-S, 4E-D1C-06-S, 4E-D1A-12-S, 4E-D1C-12-S, 4E-D1A-16-S, and 4E-D1C-16-S. Models with a 1,500 lb rating include 4E-D1D-08-H and 4E-D1D-12-H. The load rating should be matched to the application's requirements, with a safety margin considered.

What motor voltage do DYNA-LIFT electric hydraulic lift kits use?

All DYNA-LIFT electric hydraulic lift kits in the 3G Electric catalog operate on 115V AC. This is a standard voltage for many industrial and commercial power systems. The 115V AC motor powers the hydraulic pump to raise and lower the lift. Buyers should verify that their facility's power supply matches this voltage. For applications requiring different voltages, alternative models may exist, but the current product line supplied by 3G Electric is limited to 115V AC. Consult the manufacturer's documentation for any additional voltage options.

How do I identify the correct replacement DYNA-LIFT hydraulic lift kit?

To identify the correct replacement, note the manufacturer part number (MPN) of the existing unit. DYNA-LIFT MPNs follow a pattern that encodes stroke length and end type. For example, 4E-D1C-16-S indicates a 16-inch stroke with caster end type, while 4E-D1A-06-S indicates a 6-inch stroke with foot with glide end type. The load rating is also indicated by the model series. If the MPN is not available, measure the stroke length, check the end type, and confirm the load rating and voltage. 3G Electric stocks multiple SKUs and can assist with cross-referencing based on these specifications.

What are typical applications for DYNA-LIFT electric hydraulic lift kits?

DYNA-LIFT electric hydraulic lift kits are used in industrial maintenance, material handling, and positioning tasks. They can raise and lower equipment for maintenance access, position components during assembly, or adjust the height of work surfaces. The electric motor allows for powered lifting, reducing manual effort. Caster models are useful where the lift must be moved between locations, such as in maintenance shops or assembly areas. Foot with glide models are suited to stationary installations, such as in production lines or test stands. The 1,000 lb and 1,500 lb load ratings cover medium-duty applications. The 115V AC motor is compatible with common industrial power supplies.