DROSSBACH

About DROSSBACH

DROSSBACH is a manufacturer of corrugated split loom tubing used to bundle, route, and protect electrical cables and pneumatic lines in industrial machinery, automotive assemblies, and outdoor installations. The product line supplied by 3G Electric consists of general-purpose split loom tubing in two base materials: nylon and polyethylene. Both are supplied in black, are chemical resistant, and are rated for outdoor use. The tubing is split along its length, allowing cables to be inserted or removed without disconnecting terminations. This makes it suitable for maintenance and retrofit work where harnesses are already installed. Nominal sizes in the current range run from 1/4 in to 2 in. Inside diameters span 0.24–0.27 in (1/4 in nominal) up to 1.97–2.04 in (2 in nominal). Outside diameters range from 0.37–0.40 in to 2.29–2.39 in. Wall thickness varies by size and material, from 0.01–0.06 in on smaller nylon sizes to 0.02–0.17 in on the 2 in polyethylene size. Coil lengths are 100 ft, 550 ft, 800 ft, 1,100 ft, 1,900 ft, and 3,200 ft, depending on nominal size and material. The corrugated wall provides flexibility for routing around bends while maintaining a defined inner bore. The split seam allows lateral entry of cables. Nylon grades are typically selected where higher abrasion resistance and temperature tolerance are needed. Polyethylene grades are used in general-purpose outdoor and chemical-exposure environments. Both materials are black and UV-stabilized for outdoor use, as indicated by the outdoor-use rating on the supplied SKUs. 3G Electric supplies 29 DROSSBACH SKUs with published datasheets. The catalog covers the full range of nominal sizes from 1/4 in through 2 in in both nylon and polyethylene. Buyers can specify by inside diameter, outside diameter, wall thickness, material, and coil length. 3G Electric provides logistics support for global delivery, including export documentation and freight coordination. For plant engineers and maintenance managers, the split-loom format reduces installation time on existing cable runs. For procurement specialists, the range of coil lengths allows matching order quantities to project scope, from 100 ft repair coils to 3,200 ft bulk runs. The tubing is used in control panels, machine tools, conveyors, automotive wire harnesses, and outdoor equipment where cable protection against abrasion, chemicals, and weather is required. Because the product is a passive cable-management component, selection is driven by environmental exposure, cable bundle diameter, and required flexibility rather than electrical ratings. The published inside and outside diameters allow direct sizing against existing cable bundles. Wall thickness data supports crush-resistance calculations where the tubing is routed through tight spaces or across walkways. 3G Electric maintains stock and provides quotation support for the full DROSSBACH split loom tubing line.

Common Applications

• Industrial machinery — DROSSBACH nylon split loom tubing (e.g., SKU 25D269, 5/8 in) for bundling and protecting control and power cables on machine tools and conveyors.
• Automotive wire harnesses — DROSSBACH polyethylene split loom tubing (e.g., SKU 25D255, 1/4 in) for routing and protecting harnesses in vehicle assemblies and retrofit installations.
• Outdoor equipment — DROSSBACH polyethylene split loom tubing (e.g., SKU 25D263, 2 in) for cable protection on outdoor skids, pumps, and remote installations exposed to weather and chemicals.
• Control panels — DROSSBACH nylon split loom tubing (e.g., SKU 25D274, 1/4 in) for organizing and protecting internal wiring in industrial control cabinets and junction boxes.
• Chemical processing — DROSSBACH polyethylene split loom tubing (e.g., SKU 25D257, 1/2 in) for cable routing in areas with chemical exposure where chemical-resistant cable protection is required.
• Maintenance and retrofit — DROSSBACH split loom tubing (e.g., SKU 25D256, 3/8 in) for adding or replacing cable protection on existing harnesses without disconnecting terminations.