DIVERSITECH

The DiversiTech In-Pan Switch, manufacturer part number CC-1, is a float-type safety overflow switch rated for a nameplate voltage of 24V AC and a full load current of 1.5 A. It is designed for visual alarm applications in condensate pans. When the water level rises, the float mechanism triggers a visual alarm to indicate a potential overflow condition. This switch is used in HVAC systems to help prevent water damage from clogged or malfunctioning condensate drains. It is a component-level safety device, not a primary control. Installation requires matching the 24V AC control circuit and ensuring the switch is positioned correctly within the pan. The 1.5 A rating defines the maximum load the switch contacts can handle. Buyers should verify compatibility with their specific control voltage and alarm circuit before ordering.

DiversiTech offers polypropylene risers such as the HPR-12, which measures 12 inches in height, 6 inches in width, and 6 inches in length. It is rated for indoor and outdoor use and supports a maximum load of 500 lb. The body material is gray polypropylene. These risers elevate condensers and heat pumps to improve airflow and reduce debris intake. The 500 lb capacity is a static load rating; actual performance depends on proper installation on a level surface. For larger equipment, concrete pads are available in rectangular and square formats, including 36 in x 48 in x 3 in and 32 in x 32 in x 3 in. Both concrete pad types are non-drillable. Selection should be based on equipment footprint, weight, and required elevation. The HPR-12 is a single-point riser, so multiple units may be needed depending on the equipment base configuration.

The DiversiTech fin comb set, manufacturer part number 2YJ77, includes six fixed-tooth-spacing heads in sizes 8, 9, 10, 11, 12, and 14. The combs are made from blue nylon. This set is designed for straightening bent coil fins on HVAC evaporator and condenser coils. The multiple tooth spacings allow the technician to match the fin density of different coil models. Using the correct tooth spacing reduces the risk of further fin damage during the straightening process. The nylon construction is intended to be non-abrasive relative to metal combs. The set is a multi-head type, meaning the heads are separate and can be selected as needed. It is a hand tool for service and maintenance work, not for manufacturing or coil production. No additional heads are included beyond the six listed.

DiversiTech PRO-BUBBLE-32 is a leak detection fluid supplied in a 32 oz format, typically applied with a spray bottle. It is used to locate gas leaks in piping, valves, and fittings. When sprayed onto a suspected leak point, the fluid forms bubbles if gas is escaping. This visual indication allows maintenance personnel to identify the exact location of a leak during maintenance or commissioning. The fluid is intended for use on pressurized gas systems where bubble-type leak detection is appropriate. It is not a sealant or repair agent; it is a diagnostic consumable. After testing, the residue should be wiped or rinsed according to site procedures. The product is part of DiversiTech's line of HVAC/R service chemicals. Buyers should confirm compatibility with the specific gas and system materials before use.

The DiversiTech concrete condenser pad, manufacturer part number UC3648-3, is a rectangular pad measuring 36 inches in length, 48 inches in width, and 3 inches in height. It has a gray concrete outer finish and is classified as non-drillable. This pad is designed to support outdoor HVAC equipment such as air conditioning condensers. It provides a stable base that prevents ground contact and reduces debris intake. The non-drillable design means it should not be modified with holes or anchors after curing. The 3-inch height provides elevation for drainage and airflow. A square version is also available, model UC3232-3, measuring 32 in x 32 in x 3 in. Selection depends on the equipment footprint and weight distribution. These pads are heavy and require appropriate handling equipment during installation.

The DiversiTech foam puck, manufacturer part number HLP038, is a coil cleaning sprayer accessory made of foam. It has an overall length of 6 1/4 inches and includes ten 3/8-inch foam pigs. It is compatible with part number 832F12 and model HLC007. The foam puck is used to apply foam cleaning solutions to HVAC coils. The included foam pigs are consumable items that are pushed through tubes or coils to assist with cleaning. This accessory is part of a coil cleaning system, not a standalone cleaning device. Compatibility with the specified sprayer models is required for proper fit and function. The foam construction is intended for use with compatible cleaning chemicals. Buyers should verify the sprayer model in use before ordering replacement pucks or pigs.