DEKTITE

Dektite round-base boots are available with specific roof pitch ratings to match sloped roof geometries. In the 3G Electric catalog, models such as SKU 270K10, 270K09, and 270K12 are rated for a 10:12 roof pitch, while SKU 270K08 is rated for a 12:12 roof pitch. The pitch rating indicates the maximum slope the flashing is designed to seal effectively. For roofs with pitches outside these ratings, a different Dektite model or an alternative flashing solution may be required. Always verify the roof pitch at the penetration point before selecting a boot, as installing a flashing beyond its rated pitch can compromise the seal.

The top opening style determines how the flashing interfaces with the pipe. An open top opening means the EPDM collar extends above the pipe termination, allowing the pipe to protrude through the flashing. This is common for vent pipes or flues that exhaust above the roof. A closed top opening means the flashing seals over the top of the pipe, which is used when the pipe terminates at or below the roof surface. In the 3G Electric catalog, SKU 270K10 and 270K12 are examples of open top models, while SKU 270K09 is a closed top model. Selection depends on whether the pipe needs to remain open to atmosphere or be capped.

Dektite round-base boots typically combine an EPDM collar with an aluminum base. The EPDM (ethylene propylene diene monomer) collar provides flexibility and resistance to UV radiation, ozone, and typical weather exposure. The aluminum base allows the flashing to be shaped or sealed to the roof surface and provides structural support. In the 3G Electric catalog, all listed round-base boots specify EPDM as the collar material. The base material is aluminum for models such as SKU 270K10, 270K09, and 270K12. This combination is intended to accommodate thermal movement and minor vibration while maintaining a watertight seal around the pipe penetration.

For a 1-inch pipe penetration, several Dektite round-base boots are available with different base dimensions and roof pitch ratings. SKU 846RF1 has a rectangular base of 3 in L x 4 3/4 in W, SKU 846RF2 has a base of 5 in L x 9 1/4 in W, SKU 846RF3 has a base of 5 in L x 10 3/4 in W, and SKU 846RF4 has a base of 6 in L x 16 1/2 in W. All four are designed for 1 pipe and feature an open top opening and EPDM collar. Selection depends on the available roof area, the required sealing footprint, and the roof pitch. Verify the pipe outside diameter and roof slope before ordering.

Dektite round-base boots are used in residential, commercial, and light industrial roofing applications. They are commonly installed around plumbing stacks, vent pipes, and exhaust flues. The EPDM collar and aluminum base construction is intended to handle typical outdoor exposure, including UV and temperature variation. In the 3G Electric catalog, models such as SKU 270K10 and SKU 270K09 are described as suitable for residential and commercial vent pipe installations. The choice between models depends on pipe diameter, roof pitch, and whether an open or closed top is needed. For specific project requirements, consult the technical specifications of each SKU.

3G Electric supplies Dektite round-base boots and related flashing components with global logistics support. The company provides specification matching to help buyers compare roof pitch ratings, base dimensions, collar material, and top opening type across available SKUs. Quotation services are available for single-unit or volume orders. For procurement and maintenance teams, 3G Electric can assist with identifying the correct model based on pipe diameter, roof pitch, and installation requirements. Technical documentation and manufacturer part numbers are referenced in the catalog to facilitate cross-referencing with existing specifications.