BINDER

BINDER dynamic climate chambers listed by 3G Electric provide temperature accuracy tolerance of ±0.5°C at 40°C. Temperature uniformity varies by model, typically ±1.2°C, ±1.5°C, or ±2°C at 40°C. These specifications apply to the controlled test space and are measured under defined conditions. Chambers operate at either 240V or 480V, depending on the model. For precise temperature ranges beyond 40°C, refer to the individual product datasheet, as the listed accuracy and uniformity values are given at that reference point. Capacities range from 2.12 cu ft to 25.92 cu ft across the dynamic climate chamber line.

Humidity control is available on select BINDER dynamic climate chambers. For example, SKU 825Z74 (MPN 9020-0362) specifies a humidity range of 10% to 98%. Not all dynamic climate chambers include humidity control; some are designed for temperature-only testing. When specifying a chamber for stability or accelerated aging tests that require humidity, verify the humidity specifications on the individual product page. 3G Electric lists humidity minimum and maximum values where applicable, along with temperature accuracy and uniformity data, to help match the chamber to the test protocol.

BINDER environmental chambers supplied by 3G Electric are available in 240V and 480V configurations. The voltage requirement is determined by the model and is listed in the product specifications. For example, SKU 825Z65 operates at 240V, while SKU 825Z68 operates at 480V. Voltage selection affects installation requirements, including circuit sizing and plug type. Buyers should confirm the available facility voltage before ordering. 3G Electric provides voltage data for each SKU to support electrical planning and integration with existing laboratory infrastructure.

BINDER dynamic climate chambers are available in capacities from approximately 2.12 cu ft to 25.92 cu ft. Capacity selection depends on sample size, quantity, and required airflow around test items. Smaller chambers, such as the 2.12 cu ft model (SKU 825Z65), suit individual component testing or limited sample volumes. Larger chambers, such as the 25.92 cu ft models (SKU 825Z69 and 825Z73), accommodate multiple samples or larger assemblies. External dimensions also vary; for instance, the 25.92 cu ft units measure approximately 44.88 in x 62.2 in x 78.93 in. Ensure the chamber fits the available floor space and door access.

3G Electric provides datasheets and manufacturer part numbers for each BINDER climate chamber SKU. Listings include external dimensions, voltage, temperature accuracy tolerance, temperature uniformity, shelf count, and humidity range where applicable. These specifications support technical evaluation, procurement, and installation planning. For additional documentation such as manuals or calibration certificates, contact 3G Electric directly. The product data is structured to help plant engineers and maintenance managers verify that the chamber meets test requirements before purchase.

BINDER climate chambers are used in pharmaceutical stability testing when configured with appropriate temperature and humidity control. Models with humidity ranges such as 10% to 98% (e.g., SKU 825Z74) can support ICH stability conditions, but the specific chamber must be evaluated against the required test protocol. Temperature accuracy of ±0.5°C at 40°C and uniformity of ±1.2°C to ±2°C at 40°C are typical for the dynamic climate chamber line. Users should confirm that the chamber's control range, uniformity, and documentation meet their regulatory and internal quality requirements.