EXW Singapore — collect or forward from our Singapore office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

BANSBACH EASYLIFT

BANSBACH EASYLIFT is a brand of gas springs, dampers, and mechanical release mechanisms used in industrial equipment for controlled motion, counterbalancing, and remote actuation. The product line includes gas springs with force ratings from 15 lbf to 80 lbf and extended lengths from 14 13/64 in to 33 15/16 in, as well as Bowden wire releases with 10 mm mounting hole diameters and either aluminum or plastic buttons. These components are commonly specified for lifting and positioning lids, hatches, access panels, and machine guards, and for remotely releasing latches or actuating mechanisms via flexible cable. Gas springs in the line use rod thread sizes such as M8 and MF10, and some models are supplied with end fittings while others are supplied without, allowing the user to select the mounting hardware for the application. The Bowden wire releases are compatible with specific manufacturer model numbers, which are listed in the product data. 3G Electric supplies BANSBACH EASYLIFT components as part of its industrial equipment catalog, with multiple SKUs available for order. The product data includes UNSPSC classification and references to standards such as EC 1907/2006, GHS, and OSHA 29 CFR 1910 where applicable. For technical buyers, the key selection parameters are force rating, extended length, rod thread size, end-fitting configuration, and button material for release mechanisms. 3G Electric provides logistics support and can source these items for delivery to industrial facilities. The brand's components are used in machinery guarding, material handling, access panels, and other applications where controlled lifting or remote release is required. When specifying a gas spring, the force and length must match the load and geometry of the application, and the end fittings must be compatible with the mounting points. For Bowden wire releases, the mounting hole diameter and button material are the primary physical specifications, and compatibility with the associated latch or mechanism should be verified using the manufacturer model number. 3G Electric lists these products with their manufacturer part numbers and key specifications to support identification and procurement. The catalog includes gas springs with different force outputs and lengths, as well as several Bowden wire release variants that differ in button material and compatible model numbers. This range allows plant engineers and maintenance managers to select components for specific counterbalancing or remote-actuation tasks. The gas springs are intended for controlled lifting and counterbalancing, not for applications requiring locking or holding in position without additional mechanisms. The Bowden wire releases are intended for manual actuation via a flexible cable, and the button material may be selected based on environmental or durability requirements. 3G Electric supports the BANSBACH EASYLIFT line by stocking multiple SKUs and providing logistics support for global delivery. Technical documentation, including specifications and compatibility information, is available for each listed product to assist with selection and integration.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 34 of 75

About BANSBACH EASYLIFT

BANSBACH EASYLIFT is a brand of gas springs, dampers, and mechanical release mechanisms used in industrial equipment for controlled motion, counterbalancing, and remote actuation. The product line includes gas springs with force ratings from 15 lbf to 80 lbf and extended lengths from 14 13/64 in to 33 15/16 in, as well as Bowden wire releases with 10 mm mounting hole diameters and either aluminum or plastic buttons. These components are commonly specified for lifting and positioning lids, hatches, access panels, and machine guards, and for remotely releasing latches or actuating mechanisms via flexible cable. Gas springs in the line use rod thread sizes such as M8 and MF10, and some models are supplied with end fittings while others are supplied without, allowing the user to select the mounting hardware for the application. The Bowden wire releases are compatible with specific manufacturer model numbers, which are listed in the product data. 3G Electric supplies BANSBACH EASYLIFT components as part of its industrial equipment catalog, with multiple SKUs available for order. The product data includes UNSPSC classification and references to standards such as EC 1907/2006, GHS, and OSHA 29 CFR 1910 where applicable. For technical buyers, the key selection parameters are force rating, extended length, rod thread size, end-fitting configuration, and button material for release mechanisms. 3G Electric provides logistics support and can source these items for delivery to industrial facilities. The brand's components are used in machinery guarding, material handling, access panels, and other applications where controlled lifting or remote release is required. When specifying a gas spring, the force and length must match the load and geometry of the application, and the end fittings must be compatible with the mounting points. For Bowden wire releases, the mounting hole diameter and button material are the primary physical specifications, and compatibility with the associated latch or mechanism should be verified using the manufacturer model number. 3G Electric lists these products with their manufacturer part numbers and key specifications to support identification and procurement. The catalog includes gas springs with different force outputs and lengths, as well as several Bowden wire release variants that differ in button material and compatible model numbers. This range allows plant engineers and maintenance managers to select components for specific counterbalancing or remote-actuation tasks. The gas springs are intended for controlled lifting and counterbalancing, not for applications requiring locking or holding in position without additional mechanisms. The Bowden wire releases are intended for manual actuation via a flexible cable, and the button material may be selected based on environmental or durability requirements. 3G Electric supports the BANSBACH EASYLIFT line by stocking multiple SKUs and providing logistics support for global delivery. Technical documentation, including specifications and compatibility information, is available for each listed product to assist with selection and integration.

Common Applications

  • Industrial machinery — BANSBACH EASYLIFT gas spring (e.g., SKU 6GTE3, 15 lbf) for counterbalancing machine guards and access panels.
  • Material handling — BANSBACH EASYLIFT gas spring (e.g., SKU 6GTP4, 50 lbf) for controlled lifting of lids and hatches on equipment.
  • Access panels — BANSBACH EASYLIFT gas spring (e.g., SKU 6FRF3, 80 lbf) with elbow end fittings for lifting and holding panels.
  • Remote actuation — BANSBACH EASYLIFT Bowden wire release (e.g., SKU 6FRZ2, aluminum button) for releasing latches via flexible cable.
  • Emergency stops — BANSBACH EASYLIFT Bowden wire release (e.g., SKU 6FRY8, aluminum button) for remote actuation of safety mechanisms.
  • Valve controls — BANSBACH EASYLIFT Bowden wire release (e.g., SKU 6FRY5, plastic button) for manual cable pull-to-release operation.

Frequently asked questions

Common questions about BANSBACH EASYLIFT from 3G Electric.

What force ratings and extended lengths are available in the BANSBACH EASYLIFT gas spring line?

The BANSBACH EASYLIFT gas springs listed by 3G Electric include force ratings of 15 lbf, 50 lbf, and 80 lbf, with extended lengths of 15 5/8 in, 33 15/16 in, and 14 13/64 in respectively. Other SKUs may be available. The force and length must be selected based on the load and geometry of the application. Rod thread sizes include M8 and MF10. Some models are supplied with end fittings, such as elbow fittings, while others are supplied without end fittings, allowing the user to choose the mounting hardware.

What are the specifications of the BANSBACH EASYLIFT Bowden wire releases?

The BANSBACH EASYLIFT Bowden wire releases have a 10 mm mounting hole diameter and are available with either an aluminum or plastic button. They are used for remote actuation of latches, release mechanisms, or valves via a flexible cable. Each release is compatible with specific manufacturer model numbers, which are listed in the product data. For example, MPN BE5.1-011 is compatible with model AF542-266*, and MPN BE5.1-010 is compatible with model 22152A3. The button material may be selected based on environmental or durability requirements.

Are end fittings included with BANSBACH EASYLIFT gas springs?

It depends on the specific model. Some BANSBACH EASYLIFT gas springs, such as SKU 6FRF3 (MPN KK2X1-012), include elbow end fittings. Others, such as SKU 6GTE3 (MPN AN041-054) and SKU 6GTP4 (MPN 52403A), are supplied without end fittings. The product data for each SKU indicates whether end fittings are included. When end fittings are not included, they must be ordered separately or sourced to match the rod thread size and mounting requirements. The rod thread size is specified for each gas spring, such as M8 or MF10.

What standards or classifications apply to BANSBACH EASYLIFT products?

The product data for BANSBACH EASYLIFT gas springs may reference standards such as EC 1907/2006, GHS, and OSHA 29 CFR 1910, where applicable. These references indicate compliance with certain regulatory requirements for chemical substances and occupational safety. The UNSPSC classification for gas springs is 31161904. For specific compliance details, refer to the product documentation. 3G Electric provides this information as part of the product listing to assist with procurement and regulatory review.

How do I select the correct BANSBACH EASYLIFT gas spring for my application?

Selection depends on the required force, extended length, rod thread size, and end-fitting configuration. The force rating must be sufficient to counterbalance the load, and the extended length must match the mounting geometry. The rod thread size must be compatible with the end fittings or mounting points. If end fittings are not included, they must be selected separately. The application environment may also influence the choice of materials or coatings. For assistance, consult the product specifications and compatibility information provided in the catalog. 3G Electric lists multiple SKUs with their key parameters to support selection.

What are typical applications for BANSBACH EASYLIFT gas springs and Bowden wire releases?

BANSBACH EASYLIFT gas springs are used for controlled lifting and counterbalancing of lids, hatches, access panels, and machine guards in industrial equipment. Bowden wire releases are used for remote actuation of latches, release mechanisms, or valves via a flexible cable. These components are found in machinery guarding, material handling, access panels, and other applications where controlled motion or remote release is required. The specific model should be selected based on the load, geometry, and actuation requirements of the application.