EXW Singapore — collect or forward from our Singapore office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

AZTEC

AZTEC is a manufacturer of forged steel yoke ends and related rod-end hardware used in lifting, pulling, rigging, and mechanical linkage assemblies. The product line is built around a single core component family: the forged steel yoke end, which provides a threaded attachment point for connecting rods, cables, chains, and turnbuckles to clevis pins, eyes, or other termination hardware. AZTEC yoke ends are produced in right-hand thread configurations and are available in a range of tap sizes, body widths, and end-to-center-of-eye lengths to suit different load paths and assembly geometries. The line includes multiple finish options — plain, yellow zinc plated, clear zinc plated, hot-dipped galvanized, and zinc flake — each selected for a specific level of corrosion resistance and environmental exposure. Tap sizes in the catalog range from 1/4"-28 through 3/4"-16, with body widths from 5/8 in to 1 1/16 in and end-to-center-of-eye lengths from 2 in to 6 1/16 in. These dimensions allow engineers to match yoke ends to existing threaded rod, cable fittings, or turnbuckle assemblies without custom machining. The forged construction provides grain flow alignment that supports tensile and fatigue performance in cyclic loading conditions common to rigging and tensioning applications. Typical application categories include lifting and pulling assemblies, rigging and hoisting systems, towing and material handling equipment, mechanical linkage and control rod assemblies, and structural tensioning where a threaded connection to a clevis or eye is required. The yoke ends are used in industries such as construction, marine, oil and gas, utilities, and general industrial maintenance. 3G Electric supplies the AZTEC yoke end line as part of its industrial equipment catalog, offering multiple SKUs with datasheets, dimensional specifications, and logistics support for global delivery. The catalog includes both standard and long-length variants, allowing procurement and maintenance teams to source replacement components that match original equipment specifications. 3G Electric provides part-number-level identification, finish and thread documentation, and order fulfillment for single units or bulk quantities. For plant engineers and maintenance managers, the AZTEC line offers a defined set of forged steel yoke ends with published tap sizes, body widths, and end-to-center dimensions, enabling direct substitution or new design integration without relying on unverified dimensional data. The product family is narrow by design — focused on the yoke end form factor — which simplifies selection when the requirement is a threaded rod-end termination for lifting or pulling service.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 1 of 2
← Prev12Next →

About AZTEC

AZTEC is a manufacturer of forged steel yoke ends and related rod-end hardware used in lifting, pulling, rigging, and mechanical linkage assemblies. The product line is built around a single core component family: the forged steel yoke end, which provides a threaded attachment point for connecting rods, cables, chains, and turnbuckles to clevis pins, eyes, or other termination hardware. AZTEC yoke ends are produced in right-hand thread configurations and are available in a range of tap sizes, body widths, and end-to-center-of-eye lengths to suit different load paths and assembly geometries. The line includes multiple finish options — plain, yellow zinc plated, clear zinc plated, hot-dipped galvanized, and zinc flake — each selected for a specific level of corrosion resistance and environmental exposure. Tap sizes in the catalog range from 1/4"-28 through 3/4"-16, with body widths from 5/8 in to 1 1/16 in and end-to-center-of-eye lengths from 2 in to 6 1/16 in. These dimensions allow engineers to match yoke ends to existing threaded rod, cable fittings, or turnbuckle assemblies without custom machining. The forged construction provides grain flow alignment that supports tensile and fatigue performance in cyclic loading conditions common to rigging and tensioning applications. Typical application categories include lifting and pulling assemblies, rigging and hoisting systems, towing and material handling equipment, mechanical linkage and control rod assemblies, and structural tensioning where a threaded connection to a clevis or eye is required. The yoke ends are used in industries such as construction, marine, oil and gas, utilities, and general industrial maintenance. 3G Electric supplies the AZTEC yoke end line as part of its industrial equipment catalog, offering multiple SKUs with datasheets, dimensional specifications, and logistics support for global delivery. The catalog includes both standard and long-length variants, allowing procurement and maintenance teams to source replacement components that match original equipment specifications. 3G Electric provides part-number-level identification, finish and thread documentation, and order fulfillment for single units or bulk quantities. For plant engineers and maintenance managers, the AZTEC line offers a defined set of forged steel yoke ends with published tap sizes, body widths, and end-to-center dimensions, enabling direct substitution or new design integration without relying on unverified dimensional data. The product family is narrow by design — focused on the yoke end form factor — which simplifies selection when the requirement is a threaded rod-end termination for lifting or pulling service.

Common Applications

  • Construction — AZTEC forged steel yoke ends (e.g., YK12-20-YZ) for rigging and hoisting assemblies connecting threaded rod to clevis fittings
  • Marine — AZTEC hot-dipped galvanized yoke ends (e.g., YK38-16-HDG) for deck hardware and tensioning systems exposed to saltwater
  • Oil and gas — AZTEC zinc flake yoke ends (e.g., YK38-24-ZF) for mechanical linkage and control rod assemblies in outdoor installations
  • Utilities — AZTEC clear zinc plated yoke ends (e.g., YK58-18-ZP) for pulling and tensioning applications on transmission and distribution structures
  • Material handling — AZTEC plain yoke ends (e.g., YK34-16) for towing and pulling assemblies on conveyors and lifting equipment
  • General industrial maintenance — AZTEC yoke ends (e.g., YK14-28) for replacement of worn rod-end terminations in mechanical linkages

Frequently asked questions

Common questions about AZTEC from 3G Electric.

What thread sizes are available in the AZTEC forged steel yoke end line?

AZTEC yoke ends are cataloged with right-hand tap sizes including 1/4"-28, 3/8"-16, 3/8"-24, 1/2"-20, 5/8"-18, and 3/4"-16. Body widths range from 5/8 in to 1 1/16 in, and end-to-center-of-eye lengths range from 2 in to 6 1/16 in. The specific combination of tap size, body width, and length varies by SKU, so selection should be based on the mating thread and the required reach in the assembly. Datasheets for each part number list the exact dimensions.

What is the difference between the AZTEC yoke end finishes — plain, yellow zinc, clear zinc, hot-dipped galvanized, and zinc flake?

The finish determines corrosion resistance and appearance. Plain yoke ends have no applied coating and are typically used in dry, controlled environments or where a coating is applied after assembly. Yellow zinc and clear zinc platings provide a thin, uniform barrier against moisture and are common in general industrial and automotive-adjacent applications. Hot-dipped galvanized offers a thicker zinc layer for outdoor or high-moisture exposure. Zinc flake is a coating that provides corrosion protection without hydrogen embrittlement risk, often specified for high-strength threaded components. Selection should match the environmental exposure and any coating compatibility requirements of the assembly.

Can AZTEC yoke ends be used in overhead lifting applications?

AZTEC yoke ends are described as components for lifting and pulling applications, including rigging, hoisting, and mechanical linkage. However, any overhead lifting assembly must be evaluated as a system by a qualified engineer, and the yoke end must be rated for the specific load, thread engagement, and safety factor required by the application. The catalog provides dimensional and material information, but does not publish a working load limit for each SKU. Users should verify suitability through their own engineering review and comply with applicable lifting standards and regulations.

How do I select the correct AZTEC yoke end for a turnbuckle or cable assembly?

Selection depends on three primary dimensions: the tap size (thread diameter and pitch) that must match the threaded rod or cable fitting, the body width that must fit within the clevis or mounting bracket, and the end-to-center-of-eye length that determines the overall assembly reach. Thread direction is right-hand for all cataloged AZTEC yoke ends. Confirm the mating thread callout, measure the available gap for the body, and choose the length that positions the eye at the required point. Part numbers such as YK38-24-YZ, YK12-20-ZP, and YK34-16 encode tap size and finish, which can simplify identification.

Does 3G Electric provide datasheets and dimensional drawings for AZTEC yoke ends?

3G Electric lists AZTEC yoke ends with manufacturer part numbers, tap sizes, body widths, end-to-center-of-eye lengths, thread direction, and finish type. Datasheets are available for the SKUs carried. For engineering review or replacement sourcing, the part number and specification data can be used to cross-reference against existing assemblies. 3G Electric supports global order fulfillment and can provide logistics coordination for single units or volume orders.

What industries commonly use AZTEC forged steel yoke ends?

AZTEC yoke ends are used in construction, marine, oil and gas, utilities, and general industrial maintenance. Specific applications include rigging and hoisting systems, towing and material handling equipment, mechanical linkage and control rod assemblies, and structural tensioning where a threaded connection to a clevis or eye is required. The forged steel construction and range of finishes allow the same form factor to be applied in indoor machinery, outdoor structures, and corrosive environments, depending on the finish selected.