build

Accessories & Installation

Source Accessories & Installation parts worldwide from 3G Electric. Browse 57,828 in-stock items from Schneider, Parker, NIBCO & more. Order now.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

EXW Singapore

Collect or forward from our office

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 4953 of 5783

This stainless steel press tee fitting creates a branch connection in piping systems. It features a 4 in x 4 in x 3 in reducing configuration and an EPDM seal. Suitable for potable water, HVAC, and industrial process lines.

VIEGA MEGAPRESS

VIEGA MEGAPRESS Stainless Steel Press Tee Fitting, 4 in x 4 in x 3 in, EPDM

BrandVIEGA MEGAPRESS

Sign inAvailable

This 90° pipe elbow is used to change the direction of piping in medium-pressure systems. Constructed from malleable iron, it has a maximum operating pressure of 300 psi at 150°F and measures 2 inches by 2 inches. Suitable for industrial plumbing, HVAC, and process lines.

ANVIL

ANVIL 90° Malleable Iron Threaded Pipe Elbow, 2 in, 300 psi @ 150°F

BrandANVIL

Sign inAvailable

This carrying case is designed to transport and store a measuring wheel. It features a fixed handle for convenient carrying on job sites or in vehicles, protecting the wheel from damage during transit or storage.

DURAWHEEL

DURAWHEEL Carrying Case, 68932GRG

BrandDURAWHEEL

Sign inAvailable

This PVC water discharge hose assembly features synthetic fabric reinforcement for strength. With a 6-inch inside diameter, 50-foot length, and 50 psi pressure rating, it is suited for dewatering, irrigation, and general fluid transfer in industrial, construction, and agricultural settings. Temperature range: 5° to 150°F. Fitting size: 6 in x 6 in.

OEM

OEM PVC Water Discharge Hose Assembly with Synthetic Fabric Reinforcement

BrandOEM

Sign inAvailable

This solid plug is a Class 20, IPS Socket drainage pipe fitting made of polished brass. It is designed to seal open ends in low-pressure drainage systems, rated for 5 psi. The 8-inch fitting pipe size suits industrial plumbing and wastewater applications where corrosion resistance is required.

OEM

OEM Solid Plug, Class 20, 8 in IPS Socket, Polished Brass

BrandOEM

Sign inAvailable

This carbon steel eccentric reducer is designed for butt-weld extreme-pressure piping systems. It connects pipes of different diameters, reducing from 6 inches to 5 inches, and maintains a flat side to prevent air pockets in horizontal runs. Class XS rating supports high-pressure applications.

OEM

OEM Carbon Steel Butt-Weld Extreme-Pressure Eccentric Reducer, 6 in x 5 in, Class XS

BrandOEM

Sign inAvailable

This polypropylene compression tube fitting connects 1/2 in OD tubing to a 3/8 in male NPTF threaded port. It is used in industrial fluid-handling systems requiring NSF/ANSI 51 material compliance, such as food-grade or chemical processing lines.

PARKER

PARKER Polypropylene Compression Tube Fitting

BrandPARKER

Sign inAvailable

This long clamp-on slit coupling has a 5/16 in bore diameter on both ends and a 1 1/32 in overall length. It is used to connect two shafts in motion control systems, compensating for minor misalignment while transmitting torque. Typical applications include robotics, encoders, and precision positioning equipment.

RULAND MANUFACTURING

RULAND MANUFACTURING Long Clamp-On Slit Coupling RLC13-5-5-A

BrandRULAND MANUFACTURING

Sign inAvailable

This nitrile blend petroleum hose assembly is rated for 150 psi and has a 20 ft length. The hose outside diameter is 1 7/16 in, with a temperature range of -31° to 158°F. Suitable for transferring petroleum-based fuels and oils in industrial, commercial, and automotive applications.

BOSTON

BOSTON Nitrile Blend Petroleum Hose Assembly, 150 psi, 20 ft, 1 7/16 in OD

BrandBOSTON

Sign inAvailable

This nylon push-fit tee fitting connects three tubes of 5/32 in OD, 1/8 in Pipe, and 1/8 in OD sizes. It is used to create branch connections in pneumatic or low-pressure fluid systems. The black nylon construction provides corrosion resistance and lightweight installation.

AIGNEP USA

AIGNEP USA Nylon Push-Fit Tee Fitting

BrandAIGNEP USA

Sign inAvailable

← Prev 1…4951 4952 4953 4954 4955…5783 Next →

Top brands in Accessories & Installation

Leading manufacturers we stock in this category.

Parker

Guides & Resources

BURNDY YAV2CLBOX Buyer's Guide: Crimpers, Cutters & Die Heads for Global Electrical Installations