water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

EXW Singapore

Collect or forward from our office

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 3259 of 4992

Single-phase, 1/2 hp sewage ejector pump with cast iron impeller, rated for 115V AC at 60 Hz. Features integral vertical float switch and vertical discharge orientation. Handles solids up to 2 inches in diameter. Suitable for residential and light commercial wastewater removal in below-grade applications where gravity drainage is not feasible.

ZOELLER

ZOELLER General Purpose Sewage Ejector Pump

BrandZOELLER

Sign inAvailable

This seal kit and gasket set includes an O-ring and a nitrile rubber gasket for replacing worn seals in straight centrifugal pumps. It is compatible with Dayton pump model 2ZWP8. Typical applications include water circulation and transfer in industrial settings.

Dayton

Dayton Seal Kit & Gasket for Straight Centrifugal Pumps

BrandDayton

Sign inAvailable

Plumbing fixture water filter system with a micron rating of 2 to 50 microns. Reduces chlorine taste for improved water quality. Suitable for point-of-use filtration in commercial or industrial plumbing applications.

SOLVENTUM CORP DBA

SOLVENTUM CORP DBA 3M HEALTHC Water Filtration System, CFS12T

BrandSOLVENTUM CORP DBA

Sign inAvailable

PVC ball valve with straight body, full port ball port, and FNPT x FNPT connections. Tee handle for manual on/off flow control. Suitable for water, chemicals, and air in industrial piping systems.

GF PIPING SYSTEMS

GF PIPING SYSTEMS 3/4 in PVC Full Port Ball Valve, FNPT x FNPT, Tee Handle

BrandGF PIPING SYSTEMS

Sign inAvailable

This 3/4 in x 9 ft discharge hose is designed for fuel transfer pumps. It features a nitrile tube and rubber cover, with brass fittings. Rated for -20° to 160°F and UL Listed, it is suitable for transferring petroleum-based fuels in industrial and commercial applications.

HUSKY

HUSKY 3/4 in x 9 ft Discharge Hose for Fuel Transfer Pumps

BrandHUSKY

Sign inAvailable

Stainless steel press fitting with Press-fit x FNPT connection and EPDM seal, sized for 2-1/2 in pipe. Used to transition from press-fit stainless steel pipe to female NPT threaded connections in potable water systems.

VIEGA MEGAPRESS

VIEGA MEGAPRESS Press-Fit x FNPT Adapter, 2-1/2 in, EPDM

BrandVIEGA MEGAPRESS

Sign inAvailable

Watertight inlet rated 277/480V AC, three-phase, 100 A, with 4 poles and 5 wires. Features IEC grounding and is suitable for industrial power connections requiring a weather-resistant, three-phase supply.

HUBBELL

HUBBELL HBL5100B7W Watertight Inlet

BrandHUBBELL

Sign inAvailable

This 3-inch manual two-way ball valve features a 316 stainless steel straight valve body and RPTFE seals. It is equipped with a locking lever handle for secure on/off flow control. Suitable for industrial piping systems requiring corrosion resistance.

OEM

OEM APPROVED VENDOR Manual Two-Way Ball Valve: 3 in

BrandOEM

Sign inAvailable

NEXTTEQ

NEXTTEQ NX180L Methyl Bromide Gas Detection Tube, 5-Pack for NX-1000 Pumps

BrandNEXTTEQ

Sign inAvailable

This wall hydrant features a fully enclosed, round stainless steel face and a gray/stainless steel finish. With an overall length of 7 41/64 inches, it is designed for outdoor water access in commercial or industrial buildings. The stainless steel construction resists corrosion and vandalism in high-traffic areas.

AQUOR WATER SYSTEMS

AQUOR WATER SYSTEMS Wall Hydrant

BrandAQUOR WATER SYSTEMS

Sign inAvailable

← Prev 1…3257 3258 3259 3260 3261…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.

Guides & Resources

KOHLER GM39129 Marine Generator Exhaust Manifold: The Complete OEM Buyer's Guide for International Sourcing